Jump to content
SAU Community

Recommended Posts

I've got all this gear that won't be put to use on my new build, so it's gotta go!

IMG_2902.jpg

IMG_2903.jpg

IMG_2905.jpg

1. GT3076R turbo kit

Includes

- Garret GT3076R near new less than 1000k

- Tial 38mm external wastegate near new less than 1000k

- custom made screamer pipe used for 50kms MAX

- custom made 3 inch dump pipe, wrapped in billion exhaust wrap used for 50kms MAX

- custom aeroflow turbo and waterlines used for 50kms MAX

- Hybrid performance steam pipe manifold used for 50kms MAX

-GT3076 custom oil drain piping

All is near brand new, and is essentially everything you need to have a great setup. This made 318kw on 15psi on my RB25.

not looking to seperate.

$3000

IMG_2908.jpg

2. Power Enterprise 850cc sidefeed injectors

Near new, used on my car for 50kms max. E85 compatible.

includes a Nismo FPR, fuel rail and modified OEM injector harness.

$950

IMG_2909.jpg

3. OEM RB25 side feed injectors in fuel rail

No use for it

$120

IMG_2910.jpg

4. RB25 cam covers and front timing cover

no use for it

$120

IMG_2914.jpg

IMG_2912.jpg

IMG_2911.jpg

5. Nismo twin plate push type clutch

made by Tilton

plenty of meat, great pedal feel. Held over 300kw without problems.

$800

IMG_2917.jpg

IMG_2923.jpg

6. Trust DD exhaust

back part modified so it's one piece.

includes 3 inch de-cat pipe.

$400

IMG_2915.jpg

7, Cusco catch can

no use for it

$120

I am happy to ship at buyers expence. I am open to offers but please don't waste my time lowballing.

I am located in liverpool region, NSW.

PM me if you are interested.

Thanks,

Adam.

IMG_2618.jpg

Generic rear arm kit:

Includes:

Rear camber arms

rear traction arms

rear toe arms

will fit R33 R34 S14 S15 C34 and maybe some others.

barely used, great condition. Bearings are like new.

$300 shipped

http://www.skylinesaustralia.com/forums/index.php?app=core&module=attach&section=attach&attach_rel_module=post&attach_id=391834

9. 3 inch blast pipes

Brand new, no use for them.

$180 shipped

305642d1272677582-those-magnaflow-exhausts-2.5inch-resonator.jpg

10. 3 Inch resonator

brand new, no use for it. Same as in picture but painted silver.

$80 shipped

IMG_2618.jpg

Generic rear arm kit:

Includes:

Rear camber arms

rear traction arms

rear toe arms

will fit R33 R34 S14 S15 C34 and maybe some others.

barely used, great condition. Bearings are like new.

$300 shipped

Does this eliminate hicas?

Shit, I forgot about that.

Nah I've got an S14 subframe in my R33 :(

So these will fit S14/S15 and C34 fine. R Chassis will need to ditch the toe arms (where HICAS sits).

Tie-rod-comparison-2.jpg

Outer-tie-rod.jpg

14. KTS inner and outer tie rods

Changing my setup, adds lock and reduces bumpsteer on slammed cars.

Fits 33/34/S14/S15 etc

$220 shipped

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...