Jump to content
SAU Community

Recommended Posts

FOR SALE

R34 GTR OEM Front Lip $150

-Damaged in a driveway accident. Looks like it was structurally weak there due to some dodgy repairs by the previous owner. Pics show some sort of adhesive holding it together

-Needs a good plastic welding, sanding and re-spray

-It is original (see pics of stampings)

R34 GTR OEM Front Diffuser $200

-Damaged from having a hard life. Car was very low, and the diffuser wore the brunt of that

-Split in numerous places and will need to be plastic welded, bonded or whatever ingenious way anyone has of fixing it

-Tape was my friend for a while (that is what the strange marks are)

-Original item. See pics of stampings

Will sell both together for $300 for anyone keen on the combo.

Items are located in the inner-west of Sydney. Pick-ups preferred.

Inspections welcome, but pics are pretty honest, and show the worst of the damage.

Please PM or sms on 0407778421.

post-74691-0-35759300-1340539232_thumb.jpgpost-74691-0-65612900-1340539241_thumb.jpgpost-74691-0-92472800-1340539255_thumb.jpgpost-74691-0-22635100-1340539264_thumb.jpgpost-74691-0-40655600-1340539274_thumb.jpg

post-74691-0-00957500-1340539295_thumb.jpgpost-74691-0-42112400-1340539310_thumb.jpgpost-74691-0-15620900-1340539285_thumb.jpgpost-74691-0-83630800-1340539220_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
    • If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
    • Lock me in mate, although I'm not sure if I'll be heading up from Goulburn or down from Sydney, either way, return will be back to Goulburn 
×
×
  • Create New...