Jump to content
SAU Community

Recommended Posts

Mate you really, really need to learn how to internet. Seriosuly. Adjust the camber by purchasing adjustable camber arms. Besides those wheels look like what i would expect for a gtr running that offset.

I have 10.5 x 15 and that is dead in line with the guard, so if i look at your pick and subtracked 0.5" and 3mm then your car is what i would picture.

  • Replies 76
  • Created
  • Last Reply

Top Posters In This Topic

You probably don't care, but be aware that spacers of any variety are defectable/illegal, and if you have an accident with them fitted you may have your insurance voided.

if you look at the shadow off the front wheel you see that it it 'kinks' about inline with the front bar, thats caused by the lip of the front bar being further out than the wheel, suggesting that the wheels are probably inside the line of the guards.

easy to spray mate ;) if your serious tho let me know...

Yer if i had my time again id go for more aggressive.... if i cant work out a way around it i will sell :/

ahhbee u could be right .. its hard to see via this pic. hopefully track him down and get some better pics

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I think in the modern era we live in, if I were converting a hydro lifter head to solid, particularly when chasing revs, I'd be seeing what I could do to use shimless buckets. Those of us with Neos usually have this persistent niggling fear of a shim getting spat out and ruining everything. Shim-over is...yucky that way. At least the Tomei kit appears to be conventional, but it would still be nice if they'd decided to go shimless.
    • Ok guys thank you very much. GCG highflow it is then 🙂 
    • forgot to mention that when it does this it does not kill the engine, but I have not kept the pedal down long enough to let it, as I see no reason to beat up on it as its got to be something simple, small and dumb causing this.  And as soon as I let off pedal, the engine returns to its normal super smooth operation and rpms re-stabilize quickly, once below 4k. 
    • neither stumble or cut really seem to be an appropriate term....hard to explain its like a rev limiter but at 4k, but it violently shakes engine and entire vehicle as the rpms will not rise over 4k, even with slow acceleration. as soon as it hits 4k, it sounds like entire spark is lost entirely. plugs were 1.1 which I used as such, but later put in new plugs gapped down to .8 changed back after issue arose when I replaced the coils, still does it with either plug gap...damn and it was all running so good.
    • Oh how times have changed! I actually lean it out relative to my water/methanol injector duty cycle. The methanol adds a lot of fueling and you can then lean it out even more due to reduced knock. 
×
×
  • Create New...