Jump to content
SAU Community

Fs [Syd]: Turbosmart Dual Stage Boost Controller, Auto Meter Cobalt Boost Gauge, Hr Racing Pegasus 19X8.5" & 19X9.5" Rims & Tyres


Recommended Posts

Hello,

Just some stuff I am taking off the R33 and selling to fund a new clutch.

Turbosmart Dual Stage Boost Controller

  • Comes with switch, unit, T-piece, and bracket
  • Will sell for $100 if I take your stock solenoid & hose
  • Blue Unit

Price: $120 (will install on your car for a slab of beer)

Will Post using Australia Post Express Post Satchel (Tracked)

Autometer Cobalt (2-1/16") Boost Gauge in PSI

  • Will come with small hard vacuum hose from engine to cabin
  • Have for free DIY DIN mount plate (black acrylic)

Price: $50 (will install on your car for a slab of beer)

Will Post using Australia Post Express Post Satchel (Tracked)

19x8.5" F and 19x9.5" R HR Racing Pegasus HR-322 Rims

  • Machined lip, gloss black spokes
  • 5x114.3 Stud Pattern
  • Achilles Tyres all round (Approximately 70% tread)
  • 1x small gutter rash

Price: $1000

Pick up only, feel free to fit them at my place if you like too.

Exedy NC10T Used Clutch Plate

  • Used
  • 1.1 Ton Clamping Pressure
  • Surface still good, some heat marks, just machine it all good

Price: $50

Pick up only, CBF posting unless you can convince me with beer :woot:

Location: Fairfield, NSW, 2165

Contact: PM or This Thread

Cheers,

Johnny :action-smiley-069:

Some photos to get started, I'll take better photos of the rims this weekend.

DSC_1943.jpg

DSC_1945.jpg

DSC_1950.jpg

Looking a tad Mexican here LOL....

Also boost controller is now out of car, as well as boost gauge. Will trade 19s for some proper 17s or 18s

DSC_1962.jpg

DSC_1963.jpg

DSC_1964.jpg

DSC_1965.jpg

DSC_1971.jpg

HOW COME NO WANT FULLY SICK WHEELS?

$800 + slab of beer (my way of course) for SAU members only

:yes: :yes:

Boost Controller Sold

Exedy 1.1 ton Pressure Plate, suits R32, R33 GTS-t, R32 GT-R (Pre 1993)

$40 or a slab of Blue Tongue Beer

Fully Sick Spec Wheels, suits RWD/AWD Nissans, Honda Boys forget it, don't bother

$800 (wheels)

$800 + slab of beer (Wheels & Matching Nuts/Lock Nuts)

Boost Gauge

$50 pending meetup/pickup

Boost Gauge SOLD

Boost Controller SOLD

Available:

  • Fully Sick 19s
  • Exedy NC10T 1.1 ton R32 GT-R/R33 GTS-t/R32 GTS-t Pressure Plate

keen on swapping for the wheels in my avatar?18x8s all round with 70% tread on all 4 wheels

ive got same size rims on my skyline atm cost alot in tyres but great for grip and traction

I have a set of black gtt wheels for the swappings... inbox maybe for the negotiatings :domokun:

Do you know what the offset on the wheels are. Unless I missed it in an earlier post?

Do you know what the offset on the wheels are. Unless I missed it in an earlier post?

No idea bro, I have yet to pull the wheels off the car. I bought the car recently and trying to get rid of them ASAP to fund for other stuff on the car

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Initially I thought having a pair of Recaro seats would be a big bonus, it turns out these do get a little uncomfortable on long journeys (my fault, not the seat). I had a look through the GSM Performance website at reclining seats and booked an appointment to visit their show room. I got the Recaro Sportster CS for the R34 from here, was very happy with the service received so of course a re-visit was in order. Unfortunately the two Corbeau seats I had chosen aren't on display but they had 4 other options available. Two seats dug into my back, one dug into my legs and the other was perfect. I also found out that Recaro seats use a larger bolt pattern so some adaption was required. Luckily GSM offer some universal adaptors that should solve this problem. I searched the interwebs for price comparisons and Corbeau themselves were the cheapest at £300 cheaper (for the pair). I asked GSM if they could price match, unfortunately they couldn't. I later received an email saying Corbeau would honour them the same discount, but the purchase was already made. I did however order the brackets from GSM, both arrived on the same day. I started with the passenger side seat, knowing this was going to be a little trial and error. There are 3 mounting holes at the front and 2 at the rear on these JURAN Racing seat rails.  With the adaptor brackets mounted, the allen cap bolts started to push into the seat, NOT GOOD!  The rear mounting holes lined up but there were issues at the front. The holes were 1/2 hole out, so the brackets got a tickle with the drill to modify the holes. The supplied bolts weren't going to be long enough and a spacer was needed to stop the adaptor bars from bending. A local fasteners company supplied be with some nylon spacers and longer bolts (M8x30, although these will be replaced with 35mm long shortly) A before and after I pre-drilled the front bracket before making a start on the driver's seat to save some time. And in no time at all that was in the car too. The all black seats have transformed the interior and these are MUCH more comfortable. The only downside with the new Corbeau seats is I sit a little higher, but I'll happily accept that over discomfort. The Youtube video can be found here: https://www.youtube.com/watch?v=wPyttKPktXA
    • All 3 I guess. The car came with the JASI Aero 4 door Type R Full Kit unpainted so this was one thing at the top of my list to complete then I noticed there were body panels parts for this kit so i picked them up along with some black mesh to fill in the front bumper and front side air vents. car is at a paint and body shop atm completing this work. Next I will be addressing the internal bells and whistles, great summer project I can do with the kids.  full interior removal - ,boys car sound deadening - pads and spray ,boys stereo, sound, lighting - Big 3, GTT or bigger alternator ,kids head lining - dye black add star lighting mod ,daughter. That's it for the next 5-6 months. I have some motor maintenance  work i have to plan out. oil filter relocation, gaskets, mounts. beyond that, mind is starting to turn over if i can use a DET intake plenum, block off turbo ports & pipe in a air intake.      
    • roller coaster of a ride. Alarm system was removed & main harness was repaired where possible. still no fix just random successful starts. moved on to the replacing the ignition switch and relay. well all this troubleshooting & repair has been going on, the car is at a paint and body shop being pushed around. Ive been going down there on odd days after work to get it sorted.     
    • 5th November if you want to come out for a spin wakfield
    • PROBLEM WAS BROKEN COOLANT SENSOR!!! Replaced with a new one and its running mint.
×
×
  • Create New...