Jump to content
SAU Community

Track Day - 29 July 2012 Midvale Speed Dome


Recommended Posts

It's near that time again...

Track day at the Midvale Speed Dome.

There are up to 20 places available, but I'm ideally looking for 16 -17 drivers.

It will be a full day and will cost $160 including lunch.

It's a short course, so it suits quick accelerating and good handling cars.

It will be an Autokhana/Superkhana style event, which essentially means driving really fast around a series of tight corners and short straights.

It will be a FULL day event, but obviously you can come and go as you please.

You will need your own, or access to the following things;

Licenced & roadworthy car

Helmet

Long sleeve shirt and pants (cotton is best)

Closed in shoes

Your car will be lightly scrutineered before you are allowed to drive it on the track.

Basically, make sure the following things are done;

Battery is secure

Seatbelts lock under tension

Tyres are not completely bald

Loose objects are removed from cabin

Your car is not falling apart

Your car is not leaking vital fluids

Cost is $160 - payable before the day.

Price will include Hot Dogs and drinks for the drivers only.

Spectators are most welcome, but will need to provide their own food and drink.

You will need to bring your own;

Seats/blankets/cushions to sit on during the day.

Sunscreen, just in case

Insect repellent, just in case.

Don't forget your tools, and spares just in case!

There's plenty of room to make a mistake, so rest assured that the worst that will happen is your car might get a little dirty.

It'll be good fun, and it'll be at mostly slower speeds, so drive at the pace that you're most comfortable with. Your times will improve the more you drive.

There's a chance of some professional instruction on the day too.

The money is non-refundable, so if you can't make it, find someone else to take your place.

Make sure your car is reliable, and will last the whole day. The price is the same whether you drive for 1 run or 20.

You may drive someone else's car (with their permission of course!), but that car will need to scrutineered also if it hasn't been already.

Lastly, the track is for everyone who is driving on the day. Each run takes about 1 minute 30 seconds.

Don't dawdle, remember who you're after in the running order, and standstills are for Motorvation.

If you're deemed to be unsafe on the track, you get 1 warning only. After that, no more driving for you.

You will need to let me know via PM or e-mail, if you intend on driving ASAP so that I can advise and pay the venue, and sort out your running order for the day.

Contact me with any questions

Thanks :)

Spots are filling up fast!

If you'd like to drive in this event, you'll need to PM me ASAP to let me know!

If you're planning on coming down just to spectate, then just show up on the day... :)

  • 2 weeks later...

Yeah me and the old boy will cruise over and show some support, wave some flags or something haha

Will be good to see some action even though I can't be apart of it while my car is in the workshop

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...