Jump to content
SAU Community

Track Day - 29 July 2012 Midvale Speed Dome


Recommended Posts

It's near that time again...

Track day at the Midvale Speed Dome.

There are up to 20 places available, but I'm ideally looking for 16 -17 drivers.

It will be a full day and will cost $160 including lunch.

It's a short course, so it suits quick accelerating and good handling cars.

It will be an Autokhana/Superkhana style event, which essentially means driving really fast around a series of tight corners and short straights.

It will be a FULL day event, but obviously you can come and go as you please.

You will need your own, or access to the following things;

Licenced & roadworthy car

Helmet

Long sleeve shirt and pants (cotton is best)

Closed in shoes

Your car will be lightly scrutineered before you are allowed to drive it on the track.

Basically, make sure the following things are done;

Battery is secure

Seatbelts lock under tension

Tyres are not completely bald

Loose objects are removed from cabin

Your car is not falling apart

Your car is not leaking vital fluids

Cost is $160 - payable before the day.

Price will include Hot Dogs and drinks for the drivers only.

Spectators are most welcome, but will need to provide their own food and drink.

You will need to bring your own;

Seats/blankets/cushions to sit on during the day.

Sunscreen, just in case

Insect repellent, just in case.

Don't forget your tools, and spares just in case!

There's plenty of room to make a mistake, so rest assured that the worst that will happen is your car might get a little dirty.

It'll be good fun, and it'll be at mostly slower speeds, so drive at the pace that you're most comfortable with. Your times will improve the more you drive.

There's a chance of some professional instruction on the day too.

The money is non-refundable, so if you can't make it, find someone else to take your place.

Make sure your car is reliable, and will last the whole day. The price is the same whether you drive for 1 run or 20.

You may drive someone else's car (with their permission of course!), but that car will need to scrutineered also if it hasn't been already.

Lastly, the track is for everyone who is driving on the day. Each run takes about 1 minute 30 seconds.

Don't dawdle, remember who you're after in the running order, and standstills are for Motorvation.

If you're deemed to be unsafe on the track, you get 1 warning only. After that, no more driving for you.

You will need to let me know via PM or e-mail, if you intend on driving ASAP so that I can advise and pay the venue, and sort out your running order for the day.

Contact me with any questions

Thanks :)

Spots are filling up fast!

If you'd like to drive in this event, you'll need to PM me ASAP to let me know!

If you're planning on coming down just to spectate, then just show up on the day... :)

  • 2 weeks later...

Yeah me and the old boy will cruise over and show some support, wave some flags or something haha

Will be good to see some action even though I can't be apart of it while my car is in the workshop

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
    • Probably not. A workshop grade scantool is my go to for proper Consult interrogation. Any workshop grade tool should do it. Just go to a workshop.
    • In my head it does make sense to be a fuel problem since that is what I touched when cleaning the system. When I was testing with the fuel pressure gauge, the pressure was constantly 2.5 bar with the FPR vacuum removed. When stalling, the pressure was going up to 3.0 bar (which is how it should be on ignition).
    • ECUtalk pages don't mention they support the ABS computer (consult port has more than one CAN), so you might just need a different scan tool. But, I would expect ABS is a different light to the brake warning/handbrake light, do you see an ABS light come on for a few seconds when you turn the key from ACC to IGN? But since you said: I'd have a look at the ABS sensors in the rear hubs to make sure they are not damaged, disconnected etc.
    • OK, if it idles at 1000+ with the AAC, its not an idle airflow problem. The cold start valve just gives extra air when the engine is cold, but you have enough air without it to idle at 1000. I think you are back to a fuel problem, sorry. Can you see the fuel pressure staying constant or does it drop as the revs drop to a stall?  
×
×
  • Create New...