Jump to content
SAU Community

Fs: Rb26/30 Race Motor - Package Or Will Separate

shiftlock_anthony
 Share

Recommended Posts

shiftlock_anthony Enthusiast

shiftlock_anthony

Posted
Posted

Hi Everyone,

Parting out the race engine as going in a different direction...

would prefer to sell as a package but if there is enough interest i will part out.

Motor has just been pulled apart and rebuilt so is fresh ready to go.

Unsure of full power figuires as was pulled from car not long after running it in (kinda ran out of talent and crashed it!), motors of this spec produce approx 400-450rwkw.

I dont get on here much so easier to send me a txt or email

Anthony 0417 076 199

[email protected]

Please. no time wasters, this package owes me in excess of $14k and im not going to give it away.

Happy to freight interstate and buyers expense.

Cheers!

THE ENGINE - RB26/30 - $5000 long motor (no exhaust/turbo/wiring/coilpacks) may negotiate.

RB26 head with GTR plenum & throttle bodies

740cc injectors

Kelford 272 cams

Adjustable cam gears

RB30 block

forged pistons

shotpeened rods

ACL Race series bearings

ARP Stud Kit top & bottom (head and cradle)

N1 Oil pump & Oil gallery restrictor (Crank machined to suit)

Balanced and nitrated crank

Exedy HD clutch

THE OTHER STUFF!

RB25 Gearbox, excellent condition $1500

Haltech Pro Plugin ECU (fuel/ignition control + anti lag, launch control etc) $1500

Garrett GT35/82 Ball Bearing Turbo (approx 1000ks, used only for running in) $1000

RB26 Stainless Steel Exhaust Manifold with 50mm external gate & screamer (single turbo) - $500

N1 Oil Pump

66497_476870944466_306625_n.jpg

ARP Head Studs

40758_477271264466_1560991_n.jpg

577616_10150783789279467_101421444_n.jpg

Forged Pistons

37169_477195484466_3017840_n.jpg

Block

529718_10150783454949467_819606947_n.jpg

Block + RB26 Head

405058_10150783512649467_1539932768_n.jpg

Cradle bottom end with ACL Race Bearings & ARP Stud kit with high tensile bolts

72405_477270404466_7742899_n.jpg

Motor in 180sx before its birthday clean

167948_10150114224654467_7495278_n.jpg

Garrett 35/82 Ball Bearing turbo, Stainless Steel exhaust manifold & 50mm external gate

167730_10150101381379467_5472050_n.jpg165167_10150113702024467_7116452_n.jpg

Photos as it sits today ready for sale!

578204_10150919778584467_614207415_n.jpg

560349_10150919777974467_1252878002_n.jpg

560287_10150839317669467_937557764_n.jpg

558501_10150919779389467_1059141806_n.jpg

535693_10150919777574467_1012080036_n.jpg

533128_10150919778829467_956254244_n.jpg

RB25 SKYLINE Experienced

RB25 SKYLINE

Posted
Posted

yeh thanks to u for the stuff around after i had all intensions of buying this as a complete package for a price that we agreed on and u went and sold it to someone else.great way to promote ur business (shaw performance).definatly wont be attempting to buy anything off u again.i will spread the word

Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • blind_elk
      Wheel refurb?

      By blind_elk · Posted

      The powder coating came in at $250 EACH. The TRX rims got a coat of clearcoat on the outside only.    
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Bit wet, but YUMMY
    • GTSBoy
      Pops when backing off throttle, rough-ish sound through rev range.

      By GTSBoy · Posted

      Keeping in mind that I am currently getting flat 10 L/100km on my RB25DET, which means >>500km/tank. I would test this car for vacuum leaks, check codes and AFM signal with NissDataScan as D says, check plugs, do a compression check while they are out.
    • Duncan
      Pops when backing off throttle, rough-ish sound through rev range.

      By Duncan · Posted

      It is hard to be specific half way across the world...but it *seems* like it might have a minor issue. Is the idle stable and does it rev smoothly? I would not expect any pops out of what I am assuming is a standard ECU, standard tune, standard exhaust. You can use Nissan Data Scan to find out exactly what is happening when it runs, the cable/software is reasonably affordable if you are not planning on changing the ECU (which hopefully you are not with an NA skyline) BTW your mileage may not be that far off, these are heavy old tech cars, and being NA might mean you use a heavy foot to keep up with traffic....
    • AdiR34
      Pops when backing off throttle, rough-ish sound through rev range.

      By AdiR34 · Posted

      Hey guys! Y'all are the masters so figured I'd check in on a few items here. - My engine sounds ever-so-slightly more raspy than the other NA RB25s I've listened to. It's barely noticeable but definitely a slightly different sound. - When I back off the throttle at high RPM, I will sometimes get a pop out of the exhaust, assuming this can be diagnosed as misfire. Some history on the car: - Had an exhaust leak in auction sheet but was claimed to be fixed by seller (bought from USA importer).  - Car's coil packs and sparks were replaced when it was sold to me, but unsure on what the gap is and whether the coil packs are correct.  - A prior mechanic had misdiagnosed a pilot or throwout bearing sound as LSPI/detonation. Had played with timing a bit, pops/raspy sound of engine just got worse. Got timing reset. - Had failed emissions a few times. First time went in as is, failed. Second time, replaced cat, still failed, running rich as hell. Third time replaced o2 sensor, passed. Car still smells gassy though. - Timing belt and valve cover gasket also replaced.  - Gas mileage is... low. about 350-400K per tank.  Any idea if I'm having any serious issues here or does this all sound like normal old NA RB stuff and I'm fine to drive it with the pops/slightly raspy engine? If it'll help, I can get drop a video of the sound of the engine.
×
×
  • Create New...