Jump to content
SAU Community

Recommended Posts

Hi guys ive opened my business and need as much money to run my new wreking yard so ive decided to part out my private car

Its a 93 R32 GTST

Enkie circular rims with decent tread on the tyres

D1 wheel nuts

SUSPENSION

Tanabe sustec pro coilovers

whiteline swaybars front and rear

cusco adjustible arms and gear all round

RUNNING GEAR

RB20 ( slightly modified )

Extreme drift puk clutch

RB25 gearbox

custom tailshaft

2 way diff kaaz from memory

ENGINE

standard internals RB20 out of a ceffy, old owner put it in there, used to have RB25 in it

RB25 turbo ( not OP6)

AU Falcon coilpack setup with standard leads

KLS power spirit 600*300*100

JJR intercooler piping with turbosmart silicone hoses ( dam expensive hoses i must say ) all new

HKS BIG mushroom pod, not the small one with a brand new filter element

HKS super sequential blow off ( not on car yet but will come with it )

HKS turbo timer

some kind of jap brand oil catch can

stainless 3 in dump to Kakimoto exhaust system ( these bastards are 1200 new )

retuned ECU ( forgot what kind ) was done at horsepower in a box

list goes on

whole car getting parted out

message me for a price or send me an offer on what you belive its worth to you and WE CAN NEGOTIATE lol

0433368063

link to gumtree ad for pics

http://www.gumtree.com.au/s-ad/elizabeth/wrecking/wrecking-1992-r32-skyline-gts-t/1004306204

Link to comment
https://www.sau.com.au/forums/topic/404353-part-out-1992-r32-gtst/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...