Jump to content
SAU Community

Injectors Not Firing Under Load

just_racing

By just_racing,
in General Maintenance

 Share

Recommended Posts

just_racing Collaborator

just_racing

Posted
Posted

Guys in need some help.

Recently transplanted an RB26 with an Apexi Power FC into my R32 GTST. Should be just about ready to hit the track again.

Put it on the dyno and under load it stalls. We put the oscilloscope on the injectors and found:

roughly 12 volts as normal with the switching going to ground at even increments

as soon as we start to ramp it up there seems to be a little variation in the 12 volts and the switching down to ground stops happening and of course then it stalls

I have sent the ECU away for a repair and they tell me the ECU is in good condition.

i have used a GTR wiring loom and am still running the resistors.

Anyone seen this before?

Ideas on where to start?

Any help will be appreciated. Kirk

Link to comment
https://www.sau.com.au/forums/topic/404384-injectors-not-firing-under-load/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      The car remains in paint jail. I am now pretty convinced that the whole "RB25 Airboxes are kinda limiting to ~300kw" could be a thing. Also saw a good video from Engine Masters: (Sorry for FB link) (https://www.facebook.com/watch/?ref=search&v=761771519471924&external_log_id=c10bcbb6-2c39-4ff3-9240-287e9921fde6&q=Cold Air Considerations) Where they tested Pod Filter sizes and kept adding bends to a LS3 on an Engine Dyno to find if bends caused power loss. It's a good video worth watching - They did lose ~25hp from making an intake which had 3x90's and a 120 degree. They only lost maybe 1hp with a basic 90. I feel that by sealing up my airbox I have: 1) Created the same restriction a stock airbox would have. 2) Created a very convoluted set of intake 'pipes' by forcing all the air through the ducts. So I am pretty confident I'll be going full circle and have a huge hot air intake pod and actually see a benefit. The air does *not* stay hot once it gets flowing, aided by the ducts, and the pod can then pull air from anywhere. All the posts of yore talk about the stock airbox costing 10-15kw at 300kw+ but you know what? I f**king would very much like that 10-15kw and I remember my own pod filter in engine bay experiences. Turns out the GTT Reo and Headlight brackets really don't allow you to mount GTR items, no matter what the internet says. Various brackets have had to be made up to actually make it fit right for the front bar. Also some idiot mounted a 3L Accusump right where the bumper wants to go, so that has had to be 'relocated' To where, I am still not sure, but it's supposedly mounted in the pictures and I can't see it.
    • MBS206
      Factory oil temp sensor in a RS4V without gauges?

      By MBS206 · Posted

      Sounds like the oil pressure light is wired into the oil temp sensor... As it warms up, resistance on temp sensor reduces, hence more current can flow and the dash light gets brighter.
    • acsplit
      Torana Lx Gtr Hatch, Lots Of Pictures

      By acsplit · Posted

      f**k yeah, looking good
    • turbo76lx
      Torana Lx Gtr Hatch, Lots Of Pictures

      By turbo76lx · Posted

      Got the front subframe and suspension in.    
    • Dose Pipe Sutututu
      R34 GTT AC short cycling ? Normal behaviour?

      By Dose Pipe Sutututu · Posted

      If it's cold in summer, then no issue. If it's cutting out every few seconds and you're not reaching your target temp, then there's an issue. One could be the pressure switch and the other issue could be the temp probe inside the evaporator.
×
×
  • Create New...