Jump to content
SAU Community

Recommended Posts

Hey hey hey

Ive always wanted to try the Subaru upper engine cleaner. Heard of them being used on subies, evo's, vw's. So why not get rid of some carbon build up in the gtr?!

Bad idea? Please tell me why?

Yes I have searched, yes they are all in 2006 and one I found was in 2003 lol.

Question time. Where do I spray it? Do I take my intercooler pipe off the plenum and spray the first 1/2 of the can in there? Then after that where do I spray while its running?

Thanking you.

Link to comment
https://www.sau.com.au/forums/topic/404398-lets-talk-upper-engine-cleaner/
Share on other sites

So far,

  • Do it before a oil change
  • Spray 1/2 the can in each individual cylinder (thanks silvia guys)
  • Do the other half while the engine is running through a vac line
  • Make sure it is well ventilated (some videos are crazy haha)
  • Get it from Subaru dealer
  • The more smoke the dirtier your engine was
  • Its the ducks nuts

id be interested to know if anybody has had any bad experiences with it...

anybody?

i used a can on my old sonata and it seemed to make it smoke even more and use more oil.... (tho its got over 250k kms on it n they are shit engine...)

Still got a can sitting in there so wondering if i should run it thru the RB25...

turbo seals? O2 sensors? high flow cat?

Nulon upper engine cleaner is cheaper.

Warm up the engine first. Turn it off and spray it in all hoses leading to the manifold and AAC. Let it sit. Crank engine and it will start in 5 seconds or so. Repeat.

You'll probably need to reset your idle. I even had to change my cold start values.

Nulon upper engine cleaner is cheaper.

Warm up the engine first. Turn it off and spray it in all hoses leading to the manifold and AAC. Let it sit. Crank engine and it will start in 5 seconds or so. Repeat.

You'll probably need to reset your idle. I even had to change my cold start values.

The subie stuff is only $18 per can. Did it f**k your cold start valve? havent heard of the subie stuff needing to reset idle nor taking out the cold start valve. Maybe this is a skyline thing

been thinking about this stuff as well, think I'll see what my mechanic thinks next time I'm in there.

Some Mainlube engine flush probably wouldn't go astray either for the oil system!

I like your thinking. Let us know what your mechanic says

i used some in my vt commodore (had about 210,000kms on the clock at the time, and has nearly 245k on it now). other than making it smoke like a sumbitch when i started the car again (until it burnt it all away), it didn't actually do much. i pulled the intake plenum off afterwards and it was still sort of caked on so i scrubbed it clean with some carby cleaner and degreaser. didn't make any difference to how the car drove though.

I've used this sort of thing many times in a few different forms (ie nulon, wurth, AC delco etc.) and so far have found the subaru one to be the most effective. The main thing to BE AWARE of is that i believe the fumes are carcinogenic, so ALWAYS be in a well ventilated (preferably outdoors) area, and use caution while spraying. Aside from that, follow directions on the Subaru can, and have an explanation ready for when the CFA arrive :).

  • 1 month later...

Nulon upper engine cleaner is cheaper.

Warm up the engine first. Turn it off and spray it in all hoses leading to the manifold and AAC. Let it sit. Crank engine and it will start in 5 seconds or so. Repeat.

You'll probably need to reset your idle. I even had to change my cold start values.

its also rubbish compared to the subaru stuff, i use the subaru stuff in everything

i used some in my vt commodore (had about 210,000kms on the clock at the time, and has nearly 245k on it now). other than making it smoke like a sumbitch when i started the car again (until it burnt it all away), it didn't actually do much. i pulled the intake plenum off afterwards and it was still sort of caked on so i scrubbed it clean with some carby cleaner and degreaser. didn't make any difference to how the car drove though.

yeah iv never noticed a difference after using it.

Only difference i ever noticed was a bad one. Used it on a 2.0 4cyl Sonata with 250k on it. It blew a tiny bit of smoke beforehand and used a bit of oil. After some upper engine cleaner it blows smoke like a mother f**ker, especially from the valve seals (i pity the people that are behind me at the lights after sitting for a while) n it uses bulk oil now.

Never again.

The only time i can think it would be a useful product is as a repetitive preventative product in motors that are prone to build up. Otherwise its probably not going to move anything substantial (like injector treatment) and if it does itl probably create a problem in a car that is otherwise running ok...

Edited by jjman

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...