Jump to content
SAU Community

Looking For An R33 Gtst Fuel Pump

LiL_JeT

By LiL_JeT,
in Australian Capital Territory

 Share

Recommended Posts

LiL_JeT Contributor

LiL_JeT

Posted
Posted

hey guys. does anyone here have a spare 33 gtst fuel pump that i can buy of them? and how much?. or even to borrow?

my car is so screwed.. i think my pump is about to go, i drive and it randomly starts choking as if im out of petrol and it even stalls on me while on the hwy!! and i have to kick start! going 100kms hour!! sometimes around corners! LOL. even when it is idolling it sounds like misfire and stalls and comes back on.. and i give it a few revs then its fine again..

i may need to buy some coil packs and maybe even injectors to be sure.

if you have fuel pump, or coil packs or perhaps injectors you dont want, please be sure to pm me! asap if possible.

Link to comment
https://www.sau.com.au/forums/topic/404614-looking-for-an-r33-gtst-fuel-pump/
Share on other sites
Mitcho_7 Mentor

Mitcho_7

Posted
Posted (edited)

You would be Better served to get a Bosch 040 to replace the stock pump if that's the issue. Stock pumps are all old and tired now...

I have the stock s2 injectors and afm if you need to borrow them to diagnose the issue, but I don't want to sell them

I agree about the afm sounding like the issue, mine did this when I was getting reversion from the bov.

Do you still have the stock bov?

Edited by Mitcho_7
LiL_JeT Contributor

LiL_JeT

Posted
  • Author
Posted (edited)

Stinkypoo: i have a series 1 r33 gtst. does 32pumps fit?

Mitcho_7: i was thinking of buying the bosch. might as well. also it would be great to borrow your afm and injectors for a few weeks to test seeing as im only free during weekends to be able to put the injectors in. and no i have an after market hks sequencial bov.

Edited by LiL_JeT
Manuel Kasko Grand Master

Manuel Kasko

Posted
Posted

We just put my AFM in his car to see how it goes.

His one looks to be covered in blow by oil so it might fix it.

Also goin to try a new fuel filter because it's never been changed and go from there.

His also going to put the old plumb back BOV to see if this helps

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • brillo
      Leak from Tokico BM50 Brake Master Cylinder

      By brillo · Posted

      Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      PXL_20250828_063541093.TS.mp4
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • PranK
      R35 GT-R production ends after 18 years

      By PranK · Posted

    • SteveL
      Leak from Tokico BM50 Brake Master Cylinder

      By SteveL · Posted

      I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...