Jump to content
SAU Community

Recommended Posts

So,

If I boot it and then stop shortly there after, I get a sulphur smell in the car. Also if I go up a really steep hill on approx 2.5-5psi, so just holding revs while going 110 that same smell creeps into the car.

My cat is only about 6k km old.

I have also tightened up the bolts around the cat.

What else could be causing me this stinky smell?

Link to comment
https://www.sau.com.au/forums/topic/405107-why-do-i-smell-egg/
Share on other sites

It's most likely nothing to worry about mate, most petrols have sulfur in the additives. Some are better/worse smelling than others. Are you filling up from the same petrol station every time, or have you recently filled up at a station you don't normally fill up at?

Ah indeed it is a 100cell cat. stupid cat.

My next suggestion was going to be maybe you left some fried rice in the glove box after a night out at Golden Palace so I'm glad it's a 100cell cat.

The fried rice will tend to change smell anyway and I've only had that problem twice before so it's not common in the Skylines

My next suggestion was going to be maybe you left some fried rice in the glove box after a night out at Golden Palace so I'm glad it's a 100cell cat.

The fried rice will tend to change smell anyway and I've only had that problem twice before so it's not common in the Skylines

Haha, didnt even think a container of fried rice could fit in the glovebox.

Ah well, the life of running a cat i spose. Decat pipe one day

On the topic of cats, my cars been tuned on no cat, im fitting a 100 cell cat, with a 4 inch body on a 3 inch pipe, will it change the tune much? and for lean or rich? Im getting a retune after just not sure if I should baby it before tune with new cat. Running 338kw on 22 psi. On caltex 98

Any help would be good thanks

Depends on how much it flows, if it is a restriction then it will change the load points. But if it's a well flowing cat then it shouldn't change the tune much at all. I did a back to back test on my car with the exhaust on/off from the front pipe back, made hardly any difference.

Safest to get it checked first, but you shouldn't have to baby it TOO much.

just for sake of conversation my work ute does this too but only sometimes. its an 04 holden rodeo 3.5l v6 and the only unusual thing about this car is that it chews through the oil. i will do an oil change or really top up about every 4 months and only about 500ml will come out. so, maybe the smell might also have something to do with oil consumption.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Absolutely could be. I collected data logs from when the O2 sensor was still out and also after I had replaced it so will try to compare them. Pretty confident that the affect is lowered with the new sensor, will check logs at the same RPMs/conditions. 
    • Hey guys Long time lurker, I daily a nm35 stagea 250t rs four and I've had it for almost 2 years (very reliable 👌). Issues or just looking for information ill always find myself here having a read, so thought id join.  3inch stainless intake, pod filter, AM performance turbo dump pipe, 3inch hotdog, 3 and half inch stainless to 3 and half inch AM performance blast pipes. Bc racing coilovers. 18inch rims Hdi intercooler and trans cooler soon.  Here's my car
    • thanks for the advice on the box... i was thinking the 6 speed was better for cruising on the highway but on closer inspection and comparison the Rb 5 speed box was not too different...  So the choice is going to be the RB25 box... if I can save up and find one at the right price  
    • Thanks Matt, yes that's what i am aiming for. Just going to apply the right voltage and grounds to the dash connector. Hence my search for these pins... any chance you know if these pins are in the same spot as the ones on the S15 Dash connector? as mentioned above on page 8?
    • Yes, unfortunately that's the one. Signal was noisy to begin with; after driving once and looking back at the logs I saw pressure constantly swinging between 0-200psi, or staying at 0 randomly for a few seconds. There's a lot of good sensors that share the same look and feel, so don't presume they're all bad. I bought mine for 20$ off Amazon and I should have read the reviews prior, as it's clear they're junk.  I purchased a lowdollerr motorsports sensor. 
×
×
  • Create New...