Jump to content
SAU Community

Recommended Posts

I've decided to finally end the build of my R33 Skyline.

I've had a rough journey with it thus far, and with other priorities standing in my way this needs to be done.

Everything will be stripped from the R33, once most items are removed or sold I will then advertise the car as a rolling shell (open to offers).

1. RB25 alternator

Perfect working order

$60

2. RB25 power steering pump

Perfect working order

$60

3. RB25 S1 splitfire coil packs

Perfect working order

$400

4. RB25 ignition module

Perfect working order

$50

5. RB25 spark plug cover

Great condition

$50

6. RB25 gearbox (14X,XXXkms)

No crunches, nasty sounds. Very smooth

Has a Nismo heavy duty clutch pivot too.

$1100

7. RB25 starter motor

Perfect working order

$100

8. Nismo engine mounts

Essentially brand new

$200

9. OMP style seat and super dooper low fixed seat rail

Custom to suit my seating postion, I’m 6’2 and 95kg.

$400

10. Sabelt steering wheel

Near new

$200

11. Racetech 60mm oil temp water temp oil pressure & boost

Near new includes senders

$70 each or $250 for the set

12. S14 Buddyclub racing spec coilovers

Appear to be in good condition, no leaks.

8/6 spring rates

$700

13. URAS type 4 bodykit

Near new, rattlecanned bayside blue

$350

14. JDL roof spoiler

Near new, rattlecanned bayside blue

$130

15. 2 Litre surge tank setup (includes bosch 044)

All near new

$350

16. Wire tucked engine loom

Done by Dahtone Racing, the loom is completely hiden in the engine bay, re-routes the fusebox to the interior and tucks part of the loom above the drivers side wheel arch.

$500

17. shortened piping intercooler kit

Designed to be used with a forward facing plenum and a high mount turbo

includes core

$500

18. Panasonic thermos

Perfect working order

$100

19. Re-located Power steering bottle

$100

20. Nismo indicators

$50

21. Nismo 2 way LSD complete in housing

Roughly 20,00kms old, brand new nismo/motul oil

$1100

22. Nissan S15 throttle cable

Perfect for forward facing plenums

$100

23. S14 Driftworks offset rack spacers

brand new

cut a tab to fit R33, was sent wrong item.

$150

I will add more items when I come across them (forgotten some).

Located in liverpool region, NSW.

Will ship at buyers expense.

Open to offers on most items.

SMS me on 0410-65-one nine eight nine for more info

I will get pictures up in a couple of days.

Adam.

Edited by Run-It-Hard
  • Replies 51
  • Created
  • Last Reply

Top Posters In This Topic

8. Nismo engine mounts

Essentially brand new

SOLD

9. OMP style seat and super dooper low fixed seat rail

Custom to suit my seating postion, I’m 6’2 and 95kg.

SOLD

14. JDL roof spoiler

Near new, rattlecanned bayside blue

SOLD

Re-posting due to images and not being able to edit original post (how convinient!)

IMG_3755.jpg

1. RB25 alternator

Perfect working order

$60

IMG_3747.jpg

2. RB25 power steering pump

Perfect working order

$60

coilpack.jpg

3. RB25 S1 splitfire coil packs

Perfect working order

$400

IMG_3749.jpg

4. RB25 ignition module

Perfect working order

$50

IMG_3748.jpg

5. RB25 spark plug cover

Great condition

$50

IMG_3756.jpg

6. RB25 gearbox (14X,XXXkms)

No crunches, nasty sounds. Very smooth

Has a Nismo heavy duty clutch pivot too.

$1100

IMG_3746.jpg

7. RB25 starter motor

Perfect working order

$100

Nismo-engine-mounts-solid-gearbox-mount.jpg

8. Nismo engine mounts

Essentially brand new

SOLD

Modified-seat-rails.jpg

9. OMP style seat and super dooper low fixed seat rail

Custom to suit my seating postion, I’m 6’2 and 95kg.

SOLD

IMG_2682.jpg

10. Sabelt steering wheel

Near new

SOLD

IMG_2678.jpg

11. Racetech 60mm oil temp water temp oil pressure & boost

Near new includes senders

$70 each or $250 for the set

BuddyClubracingspeccoilovers.jpg

12. S14 Buddyclub Racing spec coilovers

Appear to be in good condition, no leaks.

8/6 spring rates

$700

URAS-slammed-R33.jpg

URAS-R33-kit.jpg

Uras-slam-R33.jpg

13. URAS type 4 bodykit

Near new, rattlecanned bayside blue. Includes R34 front indicators

$350

URAS-R33-kit.jpg

14. JDL roof spoiler

Near new, rattlecanned bayside blue

SOLD

Surge-tank.jpg

15. 2 Litre surge tank setup (includes bosch 044)

All near new

$350

IMG_3740.jpg

IMG_3743.jpg

IMG_3745.jpg

IMG_3744.jpg

16. Wire tucked engine loom

Done by Dahtone Racing, the loom is completely hiden in the engine bay, re-routes the fusebox to the interior and tucks part of the loom above the drivers side wheel arch.

$500

DahtoneRacingintercoolerpiping.jpg

17. shortened piping intercooler kit

Designed to be used with a forward facing plenum and a high mount turbo

includes hybrid intercooler core

$500

IMG_3754.jpg

18. Panasonic thermos

Perfect working order

$60 each or $100 for the pair

Power-steer-bottle-relocated.jpg

19. Re-located Power steering bottle

$100

20. Nismo side clear indicators

$50

IMG_2618.jpg

21. Nismo 2 way LSD complete in housing

Roughly 20,00kms old, brand new nismo/motul oil

$1100

S15throttlecable.jpg

22. Nissan S15 throttle cable

Perfect for forward facing plenums

$100

offsetrackspacers-Copy.jpg

23. S14 Driftworks offset rack spacers

brand new

cut a tab to fit R33, was sent wrong item.

$150

BqMtoBgBGkKGrHqUOKjMEut3UTuNBLuvJvjlHg_12.jpg

24. S14 inner tie rods

Brand new in packaging!

$50

IMG_3735.jpg

25. Stagea C34 S1 Bendix CT brake pads

front and rear, brand new!

$130

IMG_3737.jpg

26. Kuhmo KU36 275/35/18 tyres

Roughly 30% tread, good for burning up, or running for a month or so.

$120 for the pair

IMG_3738.jpg

27. 3 Inch resonator

Brand new

$60

IMG_3751.jpg

28. RB25 OEM throttle body

$50

IMG_2673.jpg

IMG_2351.jpg

IMG_2352.jpg

IMG_2350.jpg

29. Safety21/Cusco 6 point rollcage

It'll fit both ECR33 and BNR33 models.

It's a great cage, very unobtrusive, doesn't get in the way etc.

$900

chillin.jpg

30. Series 2 rear spoiler

rattlecanned bayside blue

$50

Hey Adam,

Cant tell from the pic, but if those guages are blue then send me a PM, if they are white then nevermind :) Chasing blue ones and too lazy to order them through ebay lol

Hey mate, have you got any front bamber arms or toerods for sale?

No I dont, sorry.

Hey Adam,

Cant tell from the pic, but if those guages are blue then send me a PM, if they are white then nevermind :) Chasing blue ones and too lazy to order them through ebay lol

They are white, forgot to mention that.

S14 is the same length as an R33 throttle cable, I found out the hard way. I believe the S15 cable is roughly 30-40mm longer (will need to measure them to be exact).

11. Racetech 60mm oil temp water temp oil pressure & boost

Near new includes senders

ONLY water temp gauge left!

Gauge holder

SOLD!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
    • No those pads are DBA too  but they have colors too. I look at the and imo the green "street" are the best.
    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
×
×
  • Create New...