Jump to content
SAU Community

Wtb: R32 Parts, Live In Townsville. Willing To Pay!

Ballast
 Share

Recommended Posts

Ballast Newbie

Ballast

Posted
Posted

Hey guys, I have just bought an R32 GTS-T, need to get it sorted and on the road. Bought the car for my wife and she is desperate to show it off.....

I am chasing a either a HICAS lock bar and the rack ends as well as mine are flogged and there is heaps of movement in the rear end or,

Driftworks HICAS eliminator. Even if someone knows a shop I can get this stuff from in Aus....

Also need a front steering rack, could probably fix mine but just want to get the thing on the road and registered first!

Rear shocks

Possibly a top pipe on the inlet (not sure of exact name), some muppet has put a big front mount on and has a blitz bov on the intercooler, but has left the standard? bov in place??? So I either need to blank it off or something?

Interior bits I'm chasing are the surround around the centre console, mine is painted silver.... I want a standard one, also the trim around the steering wheel with the fuse cover and vent in it (not sure of proper name), but mine has been butchered to fit an gauge...

Probably more but can't remember off the top of my head!

Any help would be awesome, having not owned one, not sure where is good or bad to get bits, so even if someone can point me in the direction of a good shop would be a great help!!!

Also I live in Townsville, so don't like my chance of getting anything locally but would be nice!

Thanks

Steve Grand Master

Steve

Posted
Posted (edited)

Hi,

Seeing as you are happy for post - I can highly recommend www.kyp.com.au

The owner has connections in Japan, and supplies parts to most workshops in Perth

Give them a call, pretty sure they would have everything you're after

(oh, and may be worth trying wtb section for wanted adds)

Edited by Steve
Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • RP1421
      S15 Spec R

      By RP1421 · Posted

      A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Murray_Calavera
      WTAC 2025

      By Murray_Calavera · Posted

      Yeah mate, never miss it.
    • Ozdavroz
      WTAC 2025

      By Ozdavroz · Posted

      Any going to watch World Time Attack at SMSP this year?
    • Jarsky
      R33 Fuel Pump & Brakes after alarm swap

      By Jarsky · Posted

      Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
    • zillah
      Recommendation for engine oil funnel spill free

      By zillah · Posted

      hahaha good on
×
×
  • Create New...