Jump to content
SAU Community

Virgin Rb26 Block, Sump And Front Diff

Matnos
 Share

Recommended Posts

Matnos Collaborator

Matnos

Posted
Posted

After biting the bullet and rebuilding my bottom end I now have a spare block lying around. It's a standard r32 GTR block out of a 1991 GTR.

Still have a standard oil pump (not sure of condition), tomei oil restrictor and crank girdle still attached. Other than that the block is bare.

Bore size is 86mm, there is light scoring on the top of some of the bores, but they are not deep and a hone would clean it up. looking for $500 ono

Standard R32 GTR sump and front Diff. The diff seems tight but has not been checked and the sump is in reasonable condition, looks like it has been repaired in the past due to a crack at the rear of the diff housing. Looks to be a good repair and welded strongly on both sides. looking for $200 ono

Get in contact with me either by PM here or give me a call or text on 0434817247.

Matnos Collaborator

Matnos

Posted
  • Author
Posted

I alos have a crank that is in reasonable condition, will need machining and balancing that ill throw in for cheap with the block if the buyer wants it...or if anyone else does, otherwise it will be going on the wall :whistling:

Deano 1 Mentor

Deano 1

Posted
Posted

Any pics off the block? If these guys don't buy it, I'll take it. I'll give you a deposit and pick up in 3weeks time.

Pending pics of bores

Matnos Collaborator

Matnos

Posted
  • Author
Posted

Bump and price drop

Sump only $150 with diff, the diff has been checked and is in good condition and within all tolerances specified by Nissan.

and the crank is for sale for $300

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Bennym35
      New guy

      By Bennym35 · Posted

      Hey guys Long time lurker, I daily a nm35 stagea 250t rs four and I've had it for almost 2 years (very reliable 👌). Issues or just looking for information ill always find myself here having a read, so thought id join.  3inch stainless intake, pod filter, AM performance turbo dump pipe, 3inch hotdog, 3 and half inch stainless to 3 and half inch AM performance blast pipes. Bc racing coilovers. 18inch rims Hdi intercooler and trans cooler soon.  Here's my car
    • Songo
      New kid on the block

      By Songo · Posted

      thanks for the advice on the box... i was thinking the 6 speed was better for cruising on the highway but on closer inspection and comparison the Rb 5 speed box was not too different...  So the choice is going to be the RB25 box... if I can save up and find one at the right price  
    • Songo
      New kid on the block

      By Songo · Posted

      Thanks Matt, yes that's what i am aiming for. Just going to apply the right voltage and grounds to the dash connector. Hence my search for these pins... any chance you know if these pins are in the same spot as the ones on the S15 Dash connector? as mentioned above on page 8?
    • TurboTapin
      R32 GTST - 600KW+ RB28/CD009 Build

      By TurboTapin · Posted

      Yes, unfortunately that's the one. Signal was noisy to begin with; after driving once and looking back at the logs I saw pressure constantly swinging between 0-200psi, or staying at 0 randomly for a few seconds. There's a lot of good sensors that share the same look and feel, so don't presume they're all bad. I bought mine for 20$ off Amazon and I should have read the reviews prior, as it's clear they're junk.  I purchased a lowdollerr motorsports sensor. 
    • Duncan
      Im Back baby!

      By Duncan · Posted

      wedding eh.....I seem to get to more funerals than weddings or christenings these days....
×
×
  • Create New...