Jump to content
SAU Community

Recommended Posts

I Have recently written of my 34 4 door gtt,.. I have purchased a gt and swapped my manual trans and engine from gtt and put into gt shell, so I have a combination of parts available from gtt and gt. series 1 (1998, 2000 models)

ITEMS NOT AVAILABLE ARE:

MOTOR, MANUAL BOX AND TAILSHAFT, CLUTCH PEDAL/CYLINDER, BRAKES/HUBS, and various other bits that have aready been sold.

All items are located in Adelaide hills (pickup preffered) can post at buyers expense, but will have to bear with me, I work two jobs and it can take a few days to pack and get to a post office due to this. I am open to reasonable offers and prices are not 100% firm, but please no low ball offers, time wasters AND IN THE SAKE OF KEEPING THIS THREAD CLEAN PM ME, OR EVEN BETTER SEND ME AN SMS OR PHONE CALL FOR A PROMT REPLY!!! I AM IN NO HURRY TO SELL ALL THIS< JUST THOUGHT TO START CLEARING BITS OUT SO PLEASE DO NOT WASTE Y TIME WITH STUPID OFFERS OR SAY YOU WILL PURCHASE OR COME UP AND THEN NEVER FOLLOW THROUGH- I AM VERY BUSY AND DONT NEED HASSLERS. THANKS :)

GT Air box with Snorkel $40

Gt Automatic gear box with tailshaft $200

GTT Airconditioner Compressor $100

GT/GTT/GTR headlights pair $400

RHS fender $150

2 x LHS Fenders (both have a small lip on the edge from tyres nothing major) $150 each

Bonnet (has several hail damage dints, would most probably need to be resprayed by new owner and remvig them would be an easy and cheap job) $180

GT front bar $150

Pair of GTT headlight Brackets $20

Pair of GTR headlight backets (needed for GTR front end conversion) $150

GT bonnet catch support $20

GTR bonnet catch support(needed for GTR front end conversion) $100

GTR bonnet hinges (both slightly bent from accident- id imagine a hammer and a vice and all back to normal- make an offer)

GT front reinforcement bar $80

pair of frot bar orange indicators $40

Pair of fender orange indicators$10

ABS Unit $150

Carbon canister $20

GT Dash (No Vents) $50

GT Auto dash Custer (just cicked over 100,000 kms) $80

Carpet $80

Seatbelt (set of 5 with rear buckles)$100

Door locks and ignition barrell with key- have lock box also if required for remote key) $100

Drivers door $150

Drivers door card (speaker painted silver and handle surround) $20

Passenger door$150

Passenger door card (speaker painted silver and and handle) $20

LHS Rear door card $20

LHS Rear door glass $40

LHS Rear door window switch $10

RHS Reah door card (painted handle silver $20

RHS Rear window switch $10

RHS Rear door $150

Drivers door window/mirror switches, (painted silver) $40

Passenger door window switch (painted silver)$20

Sunvisor pair $20

Parcel shelf $20

Roof lining $40

Boot lid with spoiler holes$100

Spoiler $50

Boot carpet $20

Space saver rim $40

Boot lining $50

Drivers scuff panel $20

Passenger scuff panel $20

RHS Rear scuff Panel $20

LHS Rear scuff panel $20

A Pillars pair (re fabricated) $20

B Pillars Pair $20

C Pillars Pair$20

Pair of what i beleive is the fogdriving lights that sit next to the indicators in some gtt front bars $50

RB25DET injectors (115,000 km old) make an offer

RHS Tail light $100

LHS tail light $100

Rear bumer (minor mark will come out with respray) $150

Series 2 factory plastic rear pods $200

Series 2 Factory plastic side skirts $200

Weather shied set $100 slight damage to one

Rear windscreen $100

Tripple gauge cluster (gauges only) $40

Hicas computer make an offer

Hicas unit $50

Heater $100

Roof handles set $20

Front steering rack- with crossember and sway bar $300

rear subframe (yet to remove)

Diff (has the one ABS sensor- not the one with two sensors $250

Handbrake with cable $80

SRS control box, make an offer

Steering wheel with airbag GT auto (some wear) $150

RHS Lower Control arm $50

LHS Lower Control arm $50

RHS castor arm $40

LHS castor arm $40

GTT dump pipe make an offer

Nismo exhaust (think its a 2 1/4" il have to check) cat back(knocked out cat)suit N/A $350

Rear seat $150

Front seat pair-no seat belt buckles (will sell once they have been dry cleaned to remove some grime- should be done in a week or two) $300

rear reinforcement bar$100

body loom make an offer

headight loom make an offer

inside fuse box $10

fuel flap $20

GTR ( the small reo bar that attactches to the headlight brackets and sits under where the top of the bumper goes) $40

GTT (the same bit as above but GTT)$20

GTR ( plastic strip with rubber on it that sits on top of gtr bumper $40

GTT below headlight brackets (pair) $50

GT NEO engine cover $10

GT fuel pump make an offer

GTT brake master cylinder and booster $150

mat set $80

have a gtr front bar thats been damaged in accident (make an offer) can mms pics repairable

Aftermarket rear adjustable upper arms - unsure of brand $50

Hicas lock bar (unsure of brand) $40

There is probably bits I have missed feel free to ask away- have sold a lot of interior bits hence not listed.

have various bits,like control boxes etc under dash, looms, bits n pieces, various brackets...ask away.

SHELL IS WRITTEN OFF and at this stage has a home.

Contact me via sms/phone please if possible 0419837474

Cannot be bothered uploding a pic of every part in here so can email and mms pics if required.

  • Replies 90
  • Created
  • Last Reply

Top Posters In This Topic

Both door handles?

Can take the front two off for you? Have front and rear rhs passenger.lhs crushed. Assuming won't need locks-would rather keep locks as a set with ignition barrel and key. Pm me thanks.

Rear pods sold

Sideskirts sold

Headlights sold

Hicas lock bar sold

Rear adj arms sold

Gtr front end parts sold

Boot carpet sold

Rhs gaurd sold pending payment

Few other bits on hold..

Airbox sold

Snorkel sold

Rhs gaurd sold

Engine cover and bracket sold

Also to add for sale is:

Brake master cylinder plus booster

Rear window wiper plus motor

Air flow meter

Possibly chasing the fuel tank lid and the 2 wire wiring loom between the fuel pump and fuel tank lid and about 200 mm of wiring prior to the fuel tank lid.

Got em both.. Send me a text if keen. Looms out of shell. I presume you mean the cap on tank where hosing and plugs go into for pump?

Yeah bud-auto clock spring but can make it work on manual wheel if u cut/splice just the horn wire. SMS me if ur keen as I don't check this daily.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...