Jump to content
SAU Community

Recommended Posts

Up for sale is: NO SWAPS sorry

*Blue Japanese Spec spec R Nissan Silvia S15

*approx 84xxx kms

*Manual

includes:

*Greddy Electronic boost controller(Running off a T piece at the moment)

*Brand new HID's

*Varex Muffler

*Di Jetro Power FC(worth 2k)

*Hicas and a Hicas lock bar

*18inch Wheels

*Dmax Tail lights, will come with another pair of tail lights

*Bigger turbo(unsure)

*Heavy Duty exedy clutch

*Hybrid intercooler

*Pioneer speakers and pioneer sub

*Genuine S15 Floor mats

*Stock Airbox as well as a Pod Filter

Selling on behalf or a friend who is in finacial strain, the cars gearbox is on the way out but drivable (6 speed) you can try some redline? and the front right wheel bearing need replacing

he maybe slightly neg

but he needs it gone asap 8.5 is very cheap

localted melbourne (bought car was bought from nsw hence the nsw plates on these pics)

can get more pics interior condiont is very good. inbox if your really intersted CAR MUST GO ASAP

post-64379-0-09351100-1343708664_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/405989-jdm-s15-85k/
Share on other sites

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Thank you, 100% the intent. New coils were due and the 17" sixers look/feel loads better than the stock wheels. The aero options are so spot on.   Thanks for the warm welcome, all!
    • 98 r34 gtt Been rocking my latest setup and car running like never before. Have put a good 200 miles on it since all the latest changes and additions. everything is dialed in and have been driving it a bunch.   However, all a sudden last weekend as soon as I pushed throttle passed 4k and the engine stumbles, (slow or fast acceleration) hesitates and doesn’t go above 4100 or so, like a misfire. Everything else seems fine. I had a “good” set of coil packs that I removed from car when I first got it when I changed them over to new coils. I swapped out current ones for those, but no change. I also changed the plugs, no change. Seems to rev over 4 when out of gear with no load just fine no “misfire”, but as soon as its in gear with a load of any kind, it “misfires” as soon as rpm drop back below 4 k it runs perfectly, smooth, starts, restarts and drives fine as long as I keep it below 4 k while in gear. All readings look fine, no CEL   Any idea as to what could all a sudden cause an issue when pushing rpms passed 4 k?
    • When you say your cams are 272/262 is that 272in and 262ex?
    • We're arguing semantics. I am saying 45 accel and a 55 deccel ramp are "2 ways". Even a 45 degree ramp and an 89 degree ramp is "2 ways", because it is literally... two ways. The cusco 55/30 ramp is a 2 way. It's two ways. I get it though - in normal nomenclature a "2 way" would be 45/45 or 55/55 or 60/60 i.e the same locking in both directions. And something like 45/65 would be considered "1.5 way". I would then say if we're getting into the nitty gritty then every locking diff is a "2 way" diff and we should not speak in 1.5, or 2 ways but ramp angles instead. Which ofc if one of those ramp angles is 90deg, that side is not doing any locking. :p So Nismo don't obviously sell 3 things. The fact of the matter that they only sell two items really goes to show that there's a 2 way and a "1,5 way" which is really a 1 way. I believe the actual lockup for the 'adjustability' of the GT pro is really just setting preload for when the ramps actually start locking up. It's not changing how much 'wayness' there is. It is (somehow) horribly explained. People just buy whatever diff and go "locks up good bruh" and that's what ends up on socials forever.  
×
×
  • Create New...