Jump to content
SAU Community

Recommended Posts

Hey mate, why don't you just buy mine. Its an R32 with an RB25DET conversion! Anyway, the engine itself in good nick should only be around $2500-3000 with the loom n ecu. You will save yourself heaps if you do the installation urself with some mechanic mates as the labour is the real killer when it comes to overall cost. The previous owner of my car did this (He was 1st aussie owner of the car) which I had professionally inspected and everything was mechanically sound. Once all in, you will need an engineer's certificate to approve the mods cause you've increased the capacity of the engine, & any other mods, etc. Good luck - Hope this helps.

here's a rough breakdown of my costs for stuff from japan, i've got an RB20DE in my 32 GTS...

RB25DET engine - $1500 from a Series 1 R33 with wiring loom

Power FC + hand Controller + EBC usually goes for $1300 from supplier (i got a secondhand one for $900)

HKS Intercooler - $800

TD06 + manifold + wastegate + AFM - $1500

Shipping it all in a container roughly $400, haven't done it yet, will be leaving on the 20th

Putting it all together... hehe doin it all myself with a few mates.

Although if you're goin for stock gear it should be at least $3000 cheaper.

Mind you these are all AUD and also i pulled a few strings.

Putting in an R33 engine with a stock R33 ECU is a pain in the ass apparently because the sensor readings are all different on an R32.

I;ve got wiring diagrams for both cars so if you want em let me know.

hey yeah funky monkey would i be able to have the R32 and R33 wirring loom, as my mate has converted his car engine but he cant do the wirring loom so he has sent it away to be done and they can not do it either, so he is trying to track them down so he can do it.

He has converted a R32 gts to a R33 gts25 (yeah i know why not a gts25t, well thats because he is south african and we can not understand the shit he does sometimes)

yeah the gear box and dif out of a r32 gts25 will hold and also a gts-t gear box and diff will hold however the gts-t gear wont last as long as the gts25 gear box, then it all depends on how much boost you run and how you treat your baby. gts25 gear is around 2500 and a gts-t is around about 1300 dollars so the other alternative is to run a weaker clutch so if that gives you wont have to fork out as much money on the gear box......... the gear boxes in the gts 25 are the same as the gts25t andyway.....................

I don't plan on running high boost all the time, only when I'm on the track. Other times the car's used as a daily driver so I doubt the gearbox will get a thrashing.

The box will only give if I drive it like a d!ck and race everyone I see at a traffic light. I'm not into that shit anymore so I'm sure the gearbox will last a lil while, might have to change the clutch. I'll replace the parts as they give, coz the resale value of an R32 gearbox is pityful.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Bit of a pity we don't have good images of the back/front of the PCB ~ that said, I found a YT vid of a teardown to replace dicky clock switches, and got enough of a glimpse to realize this PCB is the front-end to a connected to what I'll call PCBA, and as such this is all digital on this PCB..ergo, battery voltage probably doesn't make an appearance here ; that is, I'd expect them to do something on PCBA wrt power conditioning for the adjustment/display/switch PCB.... ....given what's transpired..ie; some permutation of 12vdc on a 5vdc with or without correct polarity...would explain why the zener said "no" and exploded. The transistor Q5 (M33) is likely to be a digital switching transistor...that is, package has builtin bias resistors to ensure it saturates as soon as base threshold voltage is reached (minimal rise/fall time)....and wrt the question 'what else could've fried?' ....well, I know there's an MCU on this board (display, I/O at a guess), and you hope they isolated it from this scenario...I got my crayons out, it looks a bit like this...   ...not a lot to see, or rather, everything you'd like to see disappears down a via to the other side...base drive for the transistor comes from somewhere else, what this transistor is switching is somewhere else...but the zener circuit is exclusive to all this ~ it's providing a set voltage (current limited by the 1K3 resistor R19)...and disappears somewhere else down the via I marked V out ; if the errant voltage 'jumped' the diode in the millisecond before it exploded, whatever that V out via feeds may have seen a spike... ....I'll just imagine that Q5 was switched off at the time, thus no damage should've been done....but whatever that zener feeds has to be checked... HTH
    • I think Fitmit had some, have a look on there (theyre Australian as well)
    • Hah, fair enough! But if you learn with this one you can drive any other OEM manual. No modern luxury features like auto rev-matching or hillstart assist to give you a false sense of confidence. And a heavy car with not that much torque so it stalls easily. 
    • Actually, I'd say all three are the automatic option. Just the different trim levels. The manual would be RSFS, no? 
×
×
  • Create New...