Jump to content
SAU Community

Recommended Posts

Hi all, i have a few things lying around the house:

Rb25 highflow turbo, was told it would flow into the 450hp region, had it inspected by my turbo mechanic and its in good condition with no end play. He said it would be a good turbo for a street car, comes with rb20 10 psi actuator, Never got the chance to put it on my car $825 posted Aus wide.

post-74083-0-23394200-1344064289_thumb.jpgpost-74083-0-63476300-1344064311_thumb.jpgpost-74083-0-31270100-1344064333_thumb.jpg

r32/33 split dump/exhaust to cat. Made by advance in Australia, they make good exhausts and this ones mild steel as well. Screamer pipe would be hard to notice when installed. $275 posted Aus wide.

post-74083-0-90653800-1344064349_thumb.jpgpost-74083-0-19273500-1344064391_thumb.jpgpost-74083-0-63437600-1344064378_thumb.jpg

or Both together for $1000 posted Aus wide.

Rb26 oil pump, $100 posted Aus wide.

post-74083-0-25137200-1344064299_thumb.jpg

2x rb26/30 timing belts, used for 5000k each $50 for pair or $30 each posted Aus wide.

post-74083-0-79794400-1344064366_thumb.jpg

Rb26 harmonic balancer, looks to be in good condition $125 posted Aus wide.

post-74083-0-17206700-1344064322_thumb.jpg

Contact Chris on: 0407323643

BUMP!

Lots of interest, However due to someone stuffing me around i lost my other sales.

So from now on first in gets it!

Bump guys, want this gone may part swap for new rb25 balancer..

Price drop $850 cash for both dump and turbo this weekend only!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
    • If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
    • Lock me in mate, although I'm not sure if I'll be heading up from Goulburn or down from Sydney, either way, return will be back to Goulburn 
×
×
  • Create New...