Jump to content
SAU Community

Recommended Posts

Ok so I've got a heap of R33 parts, I'll try to make the list as comprehensive as I can, but if you're after something thats not on the list feel free to msg me as I may have it. All parts located in western suburbs of Melb, happy to post anything under 15kg. Prices are cheap!

Can msg pics of anything.

0424999936

S2 Bonnet (white, straight) - 100

RHF guard (white, straight) - 70

Castor rod LHF - 40

Lower control arm RHF - 60

Castor rod brackets - 20 each

Instrument cluster (manual turbo 130ks) - 80

Drivers seat (bolster rip) - 20

Dash - 20

Power steering rack (recod complete from tie rod end to end) - 80

Interior parts - just ask, have heaps

Front subframe with engine mounts - 50

3 inch catback with single cannon 100db - 150

Gearbox mount with bracket - 40

Manual tailshaft - 60

5 stud conversion (100% complete hubs discs calipers brackets pads handbrake lever and cables) - 700

Injector loom - 20

Coil pack loom S2 - 20

Rear cradle - 80

Diff - 80

Rear swaybar with links - 20

rb25 clutch fan with sr20 fan blade - 10

Front window glass, drivers and passengers - 10 each

Radiator/condensor fan - 10

Standard dump pipe with O2 sensor - 20

Radiator with hoses - 40

FMIC with mounting bracket that replaces front reo, no piping - 100

Manual conversion parts

Pedals - 40

Clutch master cylinder - 40

Clutch metal hard lines - 20

Brake booster - 20

Brake master cylinder (abs) - 40

Drivers window reg with motor - 70

Passenger window reg with motor - 40

Passenger door trim complete - 20

Rear lower control arms - 20 each

Rear upper control arms - 20 each

Half shafts - 30 each

Drivers door (white) - 20

Front 5 stud turbo brake calipers - 180

Rear 5 stud setup (no handbrake cables) - 220

Link to comment
https://www.sau.com.au/forums/topic/406570-soooo-many-33-parts-vic/
Share on other sites

  • Replies 68
  • Created
  • Last Reply

Top Posters In This Topic

sold most of the after market stuff off it. had greddy plenum nismo 555cc 2871r and te37s but it's all sold now. still got a really neat fmic with mounting kit for 100 bucks

yeah piping was to suit forward facing plenum unfortunately :(

everyone keep the pm, messages and calls coming! will update the list when things get picked up or sent out today

Updated list!!

S2 Bonnet (white, straight) - 100

RHF guard (white, straight) - 70

Castor rod LHF - 40

Lower control arm RHF - 60

Castor rod brackets - 20 each

Instrument cluster (manual turbo 130ks) - 80

Drivers seat (bolster rip) - SOLD

Dash - 20

Power steering rack (recod complete from tie rod end to end) - 80

Interior parts - just ask, have heaps

Front subframe with engine mounts - 50

3 inch catback with single cannon 100db - 150

Gearbox mount with bracket - 40

Manual tailshaft - 60

5 stud conversion (100% complete hubs discs calipers brackets pads handbrake lever and cables) - SOLD

Injector loom - SOLD

Coil pack loom S2 - SOLD

Rear cradle - 80

Diff - SOLD

Rear swaybar with links - 20

rb25 clutch fan with sr20 fan blade - 10

Front window glass, drivers and passengers - 10 each

Radiator/condensor fan - 10

Standard dump pipe with O2 sensor - 20

Radiator with hoses - 40

FMIC with mounting bracket that replaces front reo, no piping - SOLD

Manual conversion parts

Pedals - 40

Clutch master cylinder - 40

Clutch metal hard lines - 20

Brake booster - SOLD

Brake master cylinder (abs) - SOLD

Drivers window reg with motor - 70

Passenger window reg with motor - 40

Passenger door trim complete - 20

Rear lower control arms - 20 each

Rear upper control arms - 20 each

Half shafts - 30 each

Drivers door (white) - 20

Front 5 stud turbo brake calipers (missing a seal,caliper slide, and a couple of caliper bolts) - 60

Rear 5 stud setup (no handbrake cables) - SOLD

Updated list!!

S2 Bonnet (white, straight) - SOLD

RHF guard (white, straight) - 70

Castor rod LHF - 40

Lower control arm RHF - 60

Castor rod brackets - 20 each

S2 AFM air flow meter pink label - 60

Instrument cluster (manual turbo 130ks) - SOLD

Drivers seat (bolster rip) - SOLD

Dash - 20

Power steering rack (recod complete from tie rod end to end) - 80

Interior parts - just ask, have heaps

Front subframe with engine mounts - 50

3 inch catback with single cannon 100db - 150

Gearbox mount with bracket - 40

Manual tailshaft - 60

5 stud conversion (100% complete hubs discs calipers brackets pads handbrake lever and cables) - SOLD

Injector loom - SOLD

Coil pack loom S2 - SOLD

Rear cradle - 80

Diff - SOLD

Rear swaybar with links - 20

rb25 clutch fan with sr20 fan blade - 10

Front window glass, drivers and passengers - 10 each

Radiator/condensor fan - 10

Standard dump pipe with O2 sensor - 20

Radiator with hoses - 40

FMIC with mounting bracket that replaces front reo, no piping - SOLD

Manual conversion parts

Pedals - 40

Clutch master cylinder - 40

Clutch metal hard lines - 20

Brake booster - SOLD

Brake master cylinder (abs) - SOLD

Drivers window reg with motor - 70

Passenger window reg with motor - 40

Passenger door trim complete - 20

Rear lower control arms - 20 each

Rear upper control arms - 20 each

Half shafts - 30 each

Drivers door (white) - 20

Front 5 stud turbo brake calipers (missing a seal,caliper slide, and a couple of caliper bolts) - 60

Rear 5 stud setup (no handbrake cables) - SOLD

Edited by filipovic

Updated list!! 19.8.2012

S2 Bonnet (white, straight) - SOLD

S2 Bonnet (white, perfect condition) - 150

RHF guard (white, straight) - 40

RHF guard (white, straight, holes drilled for cable ties) - 20

LHF guard (white, straight, holes drilled for cable ties) - 20

Grille (s2 white excellent condition) - 30

Despoilered boot (white, no holes, excellent condition) - 100

LH Taillight (white) - 40

RH Tailight (white) - 40

Spoiler (s2 in silver) - 50

RB25det s2 engine (complete with loom, ecu, turbo etc 100% complete, very low KM) - 1500

RB25det manual gearbox (very low KM) - 1300

Heater core - 40

Manual tailshaft x2 - 50 each

Front upper control arms - 10 each

Castor rod LHF x2 - 40

Castor rod RHF - 40

Lower control arm LHF - 60

Lower control arm RHF x2 - 60 each

Castor rod brackets x4 - 20 each

S2 AFM air flow meter pink label x2 - 50

Instrument cluster (manual turbo 130ks) - SOLD

Drivers seat (bolster rip) - SOLD

Drivers seat (great condition) - 50

Passenger seat (great condition) - 40

Rear seats (great condition s2) - 60

Dash x2 - 20 each

Dash facia (good condition) - 40

Centre console x2 - 20 each

Gear surround (manual, boot in bad condition) - 20

Steering column lower trim - 20

Glovebox x2 - 20

Seatbelts - 15 each

Sunroof switch - 10

Interior map light - 20

Sunvisors - 10 each

Parcel shelf - 20

Power steering rack (recod complete from tie rod end to end) - 80

Power steering rack (tie rod end to tie rod end) - 50

Interior parts - just ask, have heaps

Front subframe with engine mounts x2 - 50 each

3 inch catback with single cannon 100db - 150

Gearbox mount with bracket x2 - 40 each

Manual tailshaft x2 - 60 each

5 stud conversion (100% complete hubs discs calipers brackets pads handbrake lever and cables) - 700

5 stud conversion (100% complete hubs discs calipers brackets pads handbrake lever and cables) - SOLD

Injector loom - SOLD

Coil pack loom S2 - SOLD

Rear cradle x2 - 60

Diff (lsd manual ratio) - 120

Diff - SOLD

Rear swaybar with links x2 - 20

rb25 clutch fan with sr20 fan blade - 10

rb25 clutch fan (trimmed for cooler piping) - 40

Front window glass, drivers and passengers - 10 each

Radiator/condensor fan x2 - 10

Standard dump pipe with O2 sensor - 20

Dump pipe with screamer and O2 sensor - 150

Radiator with hoses x2 - 40each

FMIC with mounting bracket that replaces front reo, no piping - SOLD

Manual conversion parts

Pedals x2 - 40 each set

Clutch master cylinder x2 - 40 each

Clutch metal hard lines x2 - 20 each set

Brake Booster - 40

Brake master cylinder (non abs) - 60

Brake booster - SOLD

Brake master cylinder (abs) - SOLD

Drivers window reg with motor - 70

Passenger window reg with motor - 40

Passenger door trim complete x2 - 20 each

Drivers door trim (without window switch) - 30

Rear lower control arms - 20 each

Rear upper control arms - 20 each

Half shafts x6 - 30 each

Drivers door (white) - 20

Passenger door (white) - 20

Front 5 stud turbo brake calipers (missing a seal,caliper slide, and a couple of caliper bolts) - 60

Rear 5 stud setup (no handbrake cables) - SOLD

Updated list!! 25.8.2012

S2 Bonnet (white, straight) - SOLD

S2 Bonnet (white, perfect condition) - 150

RHF guard (white, straight) - 40

RHF guard (white, straight, holes drilled for cable ties) - SOLD

LHF guard (white, straight, holes drilled for cable ties) - SOLD

Grille (s2 white excellent condition) - 30

Headlight (s2 RHF missing the bracket where the grille clips) - 40

Headlight (s2 LHF broken on the bottom about 20c piece size missing) - 20

Despoilered boot (white, no holes, excellent condition) - 100

Front shocks (standard but great condition complete with springs) - 30 each

Coilovers (rear, pedders sports rider extreme x) - 300

350z wheels (pair of 17's no gutter rash) - 250

Steering wheel (s2 excellent condition) - 60

Steering wheel (rwc condition) - 20

Airbag (s2 excellent condition) x 2 - 20 each

Indiator stalk - 10

Wiper stalk - 10

Clock spring - 10

Airbag control unit - 10

Strut brace (front) - 50

Strut brace (rear) - 60

Wiper motor - 20

Steering column - 10

LH Taillight (white) - 20

RH Tailight (white) - 20

Spoiler (s2 in silver) - 50

RB25det s2 engine (complete with loom, ecu, turbo etc 100% complete, very low KM) - SOLD

RB25det manual gearbox (very low KM) - 1300

Heater core - 40

Manual tailshaft x2 - 50 each

Front upper control arms - 10 each

Castor rod LHF x2 - 40

Castor rod RHF - 40

Lower control arm LHF - 60

Lower control arm RHF x2 - 60 each

Castor rod brackets x4 - 20 each

S2 AFM air flow meter pink label x2 - 50

Instrument cluster (manual turbo 130ks) - SOLD

Drivers seat (bolster rip) - SOLD

Drivers seat (great condition) - 50

Passenger seat (great condition) - 40

Rear seats (great condition s2) - 60

Dash x2 - 20 each

Dash facia (good condition) - 40

Centre console x2 - 20 each

Gear surround - 20

Steering column lower trim - 20

Glovebox x2 - 20

Seatbelts - 15 each

Sunroof switch - 10

Interior map light - 20

Sunvisors - 10 each

Parcel shelf - 20

Power steering rack (recod complete from tie rod end to end) - 80

Power steering rack (tie rod end to tie rod end) - 50

Interior parts - just ask, have heaps

Btrims - ask for price

Front subframe with engine mounts x2 - 40 each

3 inch catback with single cannon 100db - 150

Gearbox mount with bracket x2 - 30 each

Manual tailshaft x2 - 50 each

5 stud conversion (100% complete hubs discs calipers brackets pads handbrake lever and cables) - 700

5 stud conversion (100% complete hubs discs calipers brackets pads handbrake lever and cables) - SOLD

Injector loom - SOLD

Coil pack loom S2 - SOLD

Rear cradle x2 - 40 each

Diff (lsd manual ratio) - 120

Diff - SOLD

Rear swaybar with links x2 - 20

rb25 clutch fan with sr20 fan blade - 10

rb25 clutch fan (trimmed for cooler piping) - SOLD

Front window glass, drivers and passengers - 10 each

Radiator/condensor fan x2 - 10

Standard dump pipe with O2 sensor - 20

Dump pipe with screamer and O2 sensor - 150

Radiator with hoses x2 - 30each

FMIC with mounting bracket that replaces front reo, no piping - SOLD

Manual conversion parts

Pedals x2 - 40 each set

Clutch master cylinder x2 - 40 each

Clutch metal hard lines x2 - 20 each set

Brake Booster - 30

Brake master cylinder (non abs) - 50

Brake booster - SOLD

Brake master cylinder (abs) - SOLD

Drivers window reg with motor - 70

Passenger window reg with motor - 40

Passenger door trim complete x2 - 20 each

Drivers door trim (without window switch) - 30

Rear lower control arms - 20 each

Rear upper control arms - 20 each

Half shafts x6 - 30 each

Drivers door (white) - 20

Passenger door complete with glass and motor/reg (white) - 80

Front 5 stud turbo brake calipers (missing a seal,caliper slide, and a couple of caliper bolts) - SOLD

Rear 5 stud setup (no handbrake cables) - SOLD

Hi mate, i'll grab: rb25 clutch fan with sr20 fan blade - 10

Providing the clutch hub is tight and in working order, and you'll post. (I only really need the viscous hub, don't mind if you send it without the blades).

Cheers.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
    • For race cars, this is one part where I find having the roll cage bar having gone through a hole in the floor better than the build it up on a ledge inside... The Merc I help on, the main hoop ends are marked on the car, and the jack is marked... Jack goes under a few inches and lifts one whole side of the car up... Removes that fight for long slim jacks for race car duties!   My biggest issue for the daily drivers I work on, is my jacks don't go high enough. The jacks start out on a few blocks, jack it up, then start a second jack under it on more blocks, and then I can get an axle stand under it. My axle stands are presently in use, and are nearly fully extended. The car is sitting with barely more than a cm of clearance to get the wheel off the studs! Sarah's Kluger is the same, as it has an ungodly amount of droop available in the suspension and a distinct lack of good jacking points!
    • Happy? Yep, my to do list is getting shorter and shorter. Either this light approaching is the end of the tunnel, or I'm about to be hit by a train... Ha ha ha   Also, Duncan isn't that far out of town that you need to make a multi day drive out of it. 😛
    • Sorry I meant that we are building the EH for a client.
    • LOL, when one "money pit" is never enough Noice, and excellent work mate
×
×
  • Create New...