Jump to content
SAU Community

Recommended Posts

I have some parts lying around from my R34 GTR which I have no need for, so they're all up for sale :) Local pickup preferred (located in MELBOURNE) but can also post interstate at buyer’s expense. Will post up more pics tomorrow.

  • Standard v-spec II intercooler – excellent condition - $500

  • Standard v-spec II front bar – excellent condition - $850

  • Standard v-spec II Garrett ball-bearing turbos - $800 for both
  • post-87642-0-15127800-1345043616_thumb.png
  • 2 x standard AFMs – excellent condition - $250 for both
  • post-87642-0-87774700-1345043479_thumb.png
  • Nismo exhaust (discontinued model) – excellent condition (rust and scratch free) - $1300
  • post-87642-0-49033100-1345043103_thumb.pngpost-87642-0-44581200-1345043342_thumb.png
  • ADVAN RE 19x10 + 20 rims – 3 are excellent as new, 1 has very minor rash - $3300
  • post-87642-0-48333700-1345043370_thumb.png
  • Nismo LMGT4 18x9.5 +18 rims + tyres with > 70% tread – 2 rims are as new, 2 have minor rash - $3600

Update:

Front bar - SOLD pending payment

Nismo eyelids - SOLD pending payment

Intercooler - SOLD

Turbos - still available

Nismo LMGT4 - still available

Advan RE - still available

Nismo exhaust - still available

AFMs - still available

MAKE AN OFFER - YOU MIGHT GET LUCKY!!

PRICE DROP:

Nismo exhaust (suit R34 GTR) - perfect condition $1150

Advan RS 19x10 + 20 (perfect GTR fitment) - $3100 - almost new condition

Nismo LM GT4 18x9.5 + 18 with tyres (perfect GTR fitment) - $3200

Edited by Iron Mike

Guys I need the rims gone, they're taking up too much space in my garage. Make a reasonable offer and they're yours. Again, the almost new set of 19x10 + 20 ADVAN RS rims are in black. 3 of them are completely unmarked and in new condition, 1 of them has a very minor and short scuff on the lip. Perfect fitment for GTRs, Evos, and WRXs. These are genuine ADVAN Racing forged monoblock rims, and weigh almost nothing. They retail new for over well over $4000 so make an offer and get them cheap. I can't seem to post up more pics so here's a link to my gumtree ad which has plenty of pics http://www.gumtree.com.au/m-my-ad.html?adId=1006037260&posted=true

UPDATE:

Front bar - SOLD pending payment

Nismo eyelids - SOLD

Intercooler - SOLD

Turbos - SOLD

Nismo LMGT4 - Deposit Taken

Advan RS - STILL AVAILABLE - MAKE AN OFFER

Nismo exhaust - SOLD pending payment

AFMs - still available

NISMO LMGT4 - SOLD FOR CHEAP

ADVAN RS - MAKE AN OFFER - 19x10 + 20 ADVAN RS rims in black. 3 of them are completely unmarked and in new condition, 1 of them has a very minor and short scuff on the lip. Perfect fitment for GTRs, Evos, and WRXs. These are genuine ADVAN Racing forged monoblock rims, and weigh almost nothing. See link posted above for plenty of pics

Any takers on the Advan RS? Will let them go for $2900!

Edited by Iron Mike

ADVAN RS - DROPPED TO $2800. Seriously cheap compared to new. 3 of these rims are perfect condition, less than 400km driven on them, 1 has a small amount of scuffing. Forged monoblock genuine Advan Racing 19x10+20. Look very tough. Perfect size for GTRs. See link above for photos

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
    • You have a knack for photography my friend. It makes the 86 look like a complete bucket. The 34 went with you to Europe and back. It's special. (we all feel the same about our 'shitboxes' that every bystander seems to absolutely love)
×
×
  • Create New...