Jump to content
SAU Community

Recommended Posts

OK, JET200 is getting kinda quick so its time to upgrade the brakes. These brakes are great for a street car and quick track car, but car has outgrown them. Car hs run a 1:37.8 around EC and 1:02 around Wakefield, so clearly they must work OK :)

Have done bugger all work. Track only and maybe a total of 30 hard laps at Wakefield and 20 at EC. Never a problem with them.

Front:

Wilwood 6-piston Superlite kit. Comes with:

Wilwood 6-piston Superlite calipers

Wilwood 324mm 2-piece rotors ( have plenty left )

Wilwood adaptor ( will go onto S13,S14,S15, R32 GT-R and GTS-t skylines )

Wilwood braided brake lines

Project Mu Clubracer pads ( have literally done 5 laps of Eastern Creek )

Brand New Wilwood race pads

2nd hand Project Mu H16 pads

Asking $1600

Here it is:

http://www.wilwood.com/BrakeKits/BrakeKitListFront.aspx?mincatdesc=Superlite%206%20Big%20Brake%20Front%20Brake%20Kit%20(Hat)

Rear:

Brembo R34 GT-R N1 2-piston caliper ( larger, like 350Z)

DBA 4000-series 322mm slotted rotors ( 350Z track )

Project Mu HC+ pads ( have more thaN 50% left)

Nismo braided brake lines

I used these in conjunction with a hydrualic handbrake so I dont have any of that cable handbrake stuff. Up to you to make it work

Asking $1200

Would sell the lot for $2500. Thats a cheap upgrade!!!!! Will also throw in bottl of Castrol SRF motorsport brake fluid

post-60913-0-40468000-1345196012_thumb.jpgpost-60913-0-45995800-1345196021_thumb.jpgpost-60913-0-87956900-1345196025_thumb.jpgpost-60913-0-01080400-1345196031_thumb.jpgpost-60913-0-46688000-1345196034_thumb.jpgpost-60913-0-99194400-1345196037_thumb.jpg

  • 6 months later...
  • 1 year later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
    • I assume clearances were all a-okay?
    • Shock tower brace is in +5Kw....LOL  
×
×
  • Create New...