Jump to content
SAU Community

Recommended Posts

Hi guys!

See below for details of our next Garage Cafe meet.

======================

Location: Garage Cafe at 221 Berkeley St. Carlton

Date: Friday 31 August 2012

Time: 630pm to late

=======================

Hope to see the regulars as well as a few new faces.

Please post up your attendance so I can book the venue.

Cheers,

Keith

Link to comment
https://www.sau.com.au/forums/topic/407426-vic-v35-meet-garage-cafe-august/
Share on other sites

Oh Keith, when you get your zorst put on, you mind telling me total cost and how long you were without your car for?

If its a reasonable price, and its only for like the better part of a saturday, i might give them a ring and get my bolted back on

Car is going in for its Major service that day.

Will try to scam another car to try to make it lol

I'm getting mine serviced (a minor only) that day too. Where you taking yours?

down at my mechanics in springvale

over teh 100k mark and the partner wont let me shell out for a cheap daily driver lol

I'm out at Nuwan's.

Still runs fine after 100k? Mines about to hit 85k, so having a minor service.

Oh Keith, when you get your zorst put on, you mind telling me total cost and how long you were without your car for?

If its a reasonable price, and its only for like the better part of a saturday, i might give them a ring and get my bolted back on

Popping by Revzone next Tuesday. Quoted me $80 to put the xorst on plus the time it takes for them to fix the fitment issues. They have a xorst welding specialist there but he only works weekdays. Will let you know the total damage after I pick it up.

I'm out at Nuwan's.

Still runs fine after 100k? Mines about to hit 85k, so having a minor service.

Yea still runs fine.. most of my Kms are freeway KMS. Should feel sharper once i get my major done though

Just a reminder that this is still on, although I may be car-less (Hoping that Revzone guys manage to get the exaust on by Friday.)

Look forward to see you all...and Norby and Richard, you are most welcome to join us!

Just a reminder that this is still on, although I may be car-less (Hoping that Revzone guys manage to get the exaust on by Friday.)

Let me know if you or Josh want a lift, happy to swing past after work.

lol justin is still there? I took my rex to him back in 2004..is craig still there?

Haven't seen Craig, or George for a few years. Justin is the main guy, and I have a lot of time for Jason as well.

does justin do servicing for v35's?

if so, care to PM me a price?

cheers mate

At the risk of going off topic, yes they do minor & major servicing, in fact they do everything that's not body panel work (even tyres). Can't remember the price off the top of my head (got a lot of things done at the same time) but I was pleasantly surprised.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
    • I assume clearances were all a-okay?
    • Shock tower brace is in +5Kw....LOL  
×
×
  • Create New...