Jump to content
SAU Community

Recommended Posts

ok guys going through the garage got heaps of bits here just want it all gone!!!! buy a couple bits get something free etc

bare r33 shell, front hit, straight doors, all glass, cradle, tank, all sus apart from struts/springs

$150 take it away!!! this will be scraped if not taken soon

R33 PARTS

steering rack $50

clutch/accel/brake pedals/bkts $40

stock dump and front pipe $40

stock intercooler $10

stock intake pipe $5

series 2 silver wing $20

silver mirrors $20 pair

passenger window reg/rail $20

series 1 dash $40

handbrake boot great condition $20

pass window switch $10

steering column plastics $10

hicas ECU $30

s1 front grill $20

elec ariel $20

dash surround $20

air con set up, pump, condensor, lines etc (think its complete) $30

power steer res $10

interior lights x2 $5

parcel shelf $10

fan box for air/heater $10

air con box $10

rear pillar plastics $10 pair

drivers silver tailight 2 inch crack in the clear bit down the bottom $10

black outter door handles $10 pair

inner plastic door handles $10 pair

door locks for central locking $20 pair

steering coloumn controls washer stalk, headlight stalk $20

washer stalk $5

set seatbelts $20

stock castor rods/rear camber/toe arms $20 THE LOT

gear boot/metal ring that goes under the console $5 each

hicas unit $10 each

Stainless high mount manifold, heat wrapped $200

Greddy style intake manifold TB adapter already welded to it 280

80mm Throttle Body to suit ^^^^^ $140 or buy both $380

S14 PARTS

clutch slave cylinder $20

tailshaft $40

diff and half shafts $120

stock blue wing $10

carpet grey $20

RANDOM PARTS

Old school carrozzeria CD player and pop out T.V (with remote) 2 units with dbl din bacrket $40

GFB blled valve $30

Splitfire boost gauge (small) $10

mag wheel clock $20 ($49,95 sticker still on it)

used K&N filter with metal AFM adapter $20

set of small block and big block chev pistons/rods ossible reuse, was for a project $40 the lot

may post smaller items or pick up northern suburbs ADELAIDE

pm your number if you need a pic of something!!

Do you have the centre climate, and air conditioning part I really only need the faceplate of it, from the ntre of the dash, R33 s1 ??

Edited by cashie484
  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...