Jump to content
SAU Community

Recommended Posts

I am having a parts clean out!

I'm not sure if this is OK with the forum rules about not posting the prices? if not then please remove the thread.

I am listing my parts on eBay and I'll keep adding them in the next coming days.. until they are all gone..

http://www.ebay.com....=1&_from=&_ipg=

I am located in Brisbane, but will freight at buyers expense, so if you have any questions then please PM here or on eBay.

Thanks,

Cameron.

These are the parts that are currently up on eBay:

Nissan BCNR33 Skyline GTR N1 Turbos

Near new condition

High temperature competition coating on exhaust housings

Selling due to going with a larger setup

URAS ECR33 GTST front rose joint caster/tension rods

Near new condition

Purchased in Japan

Rose Joints

Nissan BNR32 Skyline GTR G Sensor

Used G sensor

Worked perfectly before being removed from the vehicle

Hard to find these days without impact indicator showing

BCNR33 GTR Skyline N1 Centre Triple Gauge Cluster

R33 GTR N1 centre triple gauge cluster

Worked perfectly before being removed from the vehicle

Nissan Skyline GTR R32 R33 R34 RB26DETT Sard Twin Spray 800cc Top Feed Injectors

Worked perfectly before being removed from the vehicle

Supplied with plugs

Only removed from engine due to changing fuel to E85 and needing larger injectors

Nissan Skyline BCNR33 GTR Nismo Carbon Fibre Wing Plates

Genuine Nismo

Carbon Fibre

R33 GTR Wing carbon fibre end plates

Nismo Black Aluminium Gear Shift Knob

Genuine Nismo

Black Aluminium

Near new condition

Nismo Leather Gear Shift Knob

Genuine Nismo

Real Leather

Near new condition

Greddy Trust Gracer AIRINX Air Filters

Genuine Greddy Trust Gracer AIRINX Air Filters

Brand New Still in Boxes

RB26 or Z32 Filter Adaptors

Brand New Nissan RB26DETT Water Pump

Genuine Nissan Water Pump

Test fitted to motor and then pulled off

Brand New Nissan RB26DETT Timing Belt

Genuine Nissan RB26DETT Timing Belt

Brand New Still in Bag

Nissan Skyline GTR RB26DETT Injector Dropping Resistor Pack

Used RB26DETT Resistor Pack

Worked perfectly before being removed from the vehicle

Nissan Skyline BCNR33 GTR RB26DETT Injector Dropping Resistor Pack

Used RB26DETT Resistor Pack

Worked perfectly before being removed from the vehicle

Nissan Skyline BCNR33 GTR RB26DETT AAC Valve

Used Nissan RB26DETT AAC Valve

Worked perfectly before being removed from the vehicle

Nissan Skyline GTR RB26DETT Carbon Fibre Timing Belt Cover

Unknown Brand

Made in Japan

Unused

Nissan Skyline BCNR33 GTR RB26DETT Boost Control Solenoid

Used Nissan RB26DETT Boost Control Solenoid

Worked perfectly before being removed from the vehicle

Nismo S-Tune Aero body kit- Front Under Bumper Spoiler

Genuine Nismo

Brand New

Bought thinking it could fit a standard bumper, it does not :(

Nissan Skyline BCNR33 GTR Front Grill

Orange Pearl Paint with GTR Badge

Nissan Skyline BCNR33 GTR Front Bumper Indicators and Grills

Used

RHS Indicator has holes in lens

Nissan Skyline BCNR33 GTR N1 RB26DETT Air Box and Snorkel

Nissan Skyline BCNR33 GTR N1 Air Box and Snorkel

K&N Air Filter

Very hard to find these days

Nissan Skyline BCNR33 GTR RB26DETT Air Flow Meters

Factory RB26DETT air flow meters

Worked perfectly before being removed from the vehicle

Nissan Skyline R33 Rear Lower Arms with Solid Pivot Collars

To suit Nissan Skyline R33 GTS-T or GTR

Solid Ball joint collars

Shifts the pivot point up on lowered cars to improve handling

KSP Racing Equipment Carbon Kevlar Rear Bumper Cover to suit Nissan Skyline R33 GTST or GTR

Brand New still in box

KSP Brand

Carbon Kevlar

Nissan Navara Rear Door Handle

Genuine Nissan Navara Rear Door Handle

Brand New

Impul R32-R33 ECU

Used

Worked perfectly before being removed from the vehicle

Edited by CameronBNR32


  • Similar Content

  • Latest Posts

    • How dare you sell your unreliable Skyline and buy a reliable, Toyota/Yamaha car with a strong gearbox, torsen LSD and Toyota reliability. At least you won't need to worry about oil pumps, big catch can, oil restrictors, blowing off power steering belts, sheering off 3rd gear, failing ABS relays/pumps, etc.
    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
×
×
  • Create New...