Jump to content
SAU Community

Recommended Posts

Just thought I'd get everyones opinions on upgrades stages for the R33 GTR V-spec.

I have put these stages together so that I can spead my costs, have no massive outlay in one hit, not to repeat labour or parts and still have maximum power for each upgrade

Any comments or changes would be great.

95+ Nissan Skyline R33 GTR V-Spec

STAGE 1.

Apexi Air Filter Kit

HKS Cam Gears Set

Apexi AVC-R

Apexi Power FC

Apexi FC Commander

HKS Front Pipes

HKS Extention Kit

Z32 AFM's

STAGE 1a.

Nismo G Max Twin Plate Clutch

STAGE 2.

Nismo 660+HP Fuel Pump

Sard 700cc Injectors

HKS GT-SS or GT2530 Turbo Kit

STAGE 3.

HKS Oil Cooler Kit

HKS Intercooler Kit

Nismo 320Km Combo Meter

Cheers,

Daniel

Link to comment
https://www.sau.com.au/forums/topic/40798-gtr-upgrade-stages/
Share on other sites

Thats a fairly pricey stage 1 you have there.

Generally a stage 1 type upgrade would include a cat back exhaust, pod filters and some cam gears.

I will be interested to see how this progresses as its very similar to my modification plan.

Nick

My opinions:-

i) replace the element in the standard air box rather than worry about he apexi air filters and the hassle of fabricating a CAI box.

ii) I think you can delete the Z32 Air flow meters from stage 1 as the standard units will have plenty of resolution for that level of mods.

Here's what I think based on my GTR stages....

STAGE 1. (You should hit 250-270 at the rears on 15psi stock turbos)

HKS Cam Gears Set

Apexi Power FC

Apexi FC Commander

HKS Front Pipes - < or save some money and get an exhaust shop to custom some 2.5 into 3in for you around $400fitted

+ Boost Controller - I chose HKS EVC 3 or 4, much better than a AVC-R

+ Hi flow cat back system

+approx labour cost and tune excluding parts $600-1K

- - - - - - - - - - - - - - - - - - - - - - - - -

HKS Extention Kit - < Found no real gain compared to my stock GTR dumps

Apexi AVC-R - < Go the HKS EVC 3 or 4, holds boost perfectly

Z32 AFM's - < moved to stage 2

Apexi Air Filter Kit - < replace the filter instead, and keep the standard box

STAGE 2. (you should hit around 300 - 330kw on the rears on 18-20psi)

Z32 AFM's

Sard 700cc Injectors

HKS GT-SS or GT2530 Turbo Kit

Nismo 660+HP Fuel Pump - < or Bosch 044

Nismo G Max Twin Plate Clutch - Any twin plate

+approx labour cost and tune excluding parts $2-2.5K

- - - - - - - - - - - - - - - - - - - - - - - - -

STAGE 3. (optional)

HKS Oil Cooler Kit - < dont bother if your not doing track work

HKS Intercooler Kit - < around the 300-330kw the stock cooler is good enough

Nismo 320Km Combo Meter - < please add soy sauce with my rice

+ Catch Can - < you didn't mentioned this but its a precautionary messaure

- - - - - - - - - - - - - - - - - - - - - - - - -

HKS Extention Kit - < Found no real gain compared to my stock GTR dumps

Mesh;

This is interesting. I'm contemplating a choice of dump pipes at the moment and recently posted a link to an article that was written (so it appears anyway)

by a Garrett Engineer.

My mods will be:

N1s, Tomei Stage1 PONCAMs, pulleys, 700cc inj, Sard reg and pump, standard airbox w/ K and N, exhaust, tune, dumps (?)

The problem that I'm finding is that no one can provide objective evidence to support the use of either the HKS short wastegate pipe, Trust long wastegate pipe, or open bellmouth type designs; consensus appears to be that of the above the long pipe will be best, but all will perform better than the standard units.

Could I ask what your experience was please?

Hi Scooby,

Logic & tuners (inc mine) says a dump will have it's benfits, however they are minimal less than <3kw for the added cost of $600+ for HKS Dumps, and $1000+for the trust. My GTR has the stock dumps at the moment and makes 320kw on 19~psi. Personally next time I might go the trust as it is a single piece which include the dumps and the front pipe, as the cost works out the same as buying the pieces individually.

I completed in 2 stages similar to that above, "just waiting for my OS Giken Twin Plate to arrive" see my link.

http://www.skylinesaustralia.com/forums/sh...ead.php?t=39742

powerFC isn't needed in stage 1 - im running ~270rwkw without a powerfc, but it is definatly needed for stage2

meshmesh - where are you getting your clutch from? how much if you don't mind me asking

Hi ferni, I thought your ECU was re-chipped or something?

The clutch is costing me around $2K from japan

The problem that I'm finding is that no one can provide objective evidence to support the use of either the HKS short wastegate pipe, Trust long wastegate pipe, or open bellmouth type designs; consensus appears to be that of the above the long pipe will be best, but all will perform better than the standard units
.

Scooby,

Same problem I had, so I took the word of my tuners who have tested it on a dyno, and it seems they were correct. You also said you wanted to go Trust Stage 1 Cams.. were you thinking 256's? As I also looked into the same cams, and after some full on punch ons with my tuners & others alike I decide to go with their advice "again" and not install cams. Here's why, as a general statement related to Stock GTR Rb26 motors, there are a few things you need to consider and they all come back to longevity of the Stock motor. Sure cams will help, but they will add alot of stress on the motor like many things. I've based my tune & upgrades very conservatively, and know "for a fact" that we can get 400rwkw from my exact same set up... dont believe it speak to Emre. So keeping that in mind my tune at around 320kw is quite safe. My future thought is if I choose to rebuild the motor then I will definately go the cams, full house etc etc.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
×
×
  • Create New...