Jump to content
SAU Community

Recommended Posts

Does anyone know where I can get a front set of wheels for my V36 225/45 R19 and my V36 wheel alignment done in perth, went down to Bob Jane, no tyres available in Australia of this size and they cant align my wheels as well since they dont have the V36 on their wheel alignment computers.

Link to comment
https://www.sau.com.au/forums/topic/408816-v36-tyreswheel-alignment/
Share on other sites

Unfortunately, no Australian distributor supplies the Nissan spec tyres for the fronts. I guess the manufacturers figure there's no market for that size. As such, the only option there is to go 225/40 R19 and even then, not all manufacturers supply that size! Dunlop are one such guilty party and I normally rate their Sport Maxx tyres.

As for the wheel alignment, maybe my knowledge of wheel alignment fails me but while I appreciate all vehicles have their own specifications for what their toe should be, surely they can look the details up somewhere and then just dial it in? That's pretty poor form but I guess the introduction of the V37/G37 next year should hopefully help to alleviate that.

Thanks I actually found some new 225/45/19 pirelli pzero nero, but were manufactured in 2006 but heres the next bit went to bob jane and said that they cant put it on since its older than 5 years.... think its their store policy. Does anyone know of a good place in perth who will put these on for me?

Thanks in Advance

Edited by mystic

Wow. When I was searching for tyres earlier this year (January), I found nothing out of Pirelli either. Looking them up now, the only current tyres that have in that size seem to be the Cinturato P7 and P1. No way I'd get those on. It's all or nothing with them, in my opinion.

You'll probably need to find a mechanic who will turn a blind eye to the old tyres if you will. A tyre of that age generally isn't in good shape if it hasn't been stored properly and as a consequence, the characteristics of the rubber will be sorely affected. That's why the Bob Jane guys aren't inclined to touch them.

I've been running 245/40 on the stock 19s for years with no issues

close enough to spec not to put your speedo out & much more common size with manufacturers

good luck finding someone to put your tyres on, have you tried a local mechanic with a tyre fitting machine?

I've run p zero nero on the fronts before they held up very well

this was in 235/40 19 a bit out of spec compared to stock tyre but again nothing to put the speedo out significantly maybe 2-3km/h on the speedo faster than you will actually be travelling

post-29425-0-95900000-1347145622_thumb.jpg

I've been running 245/40 on the stock 19s for years with no issues

close enough to spec not to put your speedo out & much more common size with manufacturers

Given Nissan recommend 225's in the front, how did that affect your steering at moderate-high speeds?

no perceivable difference in steering to the 225 potenzas it came with, I've tracked on the 235/40 p zero I posted above & on 245/40 no issues :)

This car was also my daily driver until very recently (it's now my weekend car)

245/40 don't bulge on the rim or anything like that either

go to this site, join, choose your car, download the front and rear suspension modules and you can tell them what the alignment should be

http://x.infinitihel...nks.php?catid=3

Edited by Skylinetragic

no perceivable difference in steering to the 225 potenzas it came with, I've tracked on the 235/40 p zero I posted above & on 245/40 no issues :)

Nice. Something for me to keep in mind.

This car was also my daily driver until very recently (it's now my weekend car)

What's taken its daily place? An old nugget that you don't care if people open their doors on in parking stations? :)

245/40 don't bulge on the rim or anything like that either

I wouldn't expect them to since the rims are the same front and rear.

What's taken its daily place? An old nugget that you don't care if people open their doors on in parking stations? :)

I bought a new x-trail during their 1% finance offer (they're now doing 0.9% finance this month, the bastards :laugh:)

I bought a new x-trail during their 1% finance offer (they're now doing 0.9% finance this month, the bastards :laugh:)

Bastards! Lol!

What tyres were put on during compliance? If you can't get the appropriate size, how did they comply the car?

The tyres don't need to be precisely the same size. A small deviation is allowable.

I'm aware. Just was curious as to what they put on during compliance. If they were changed in Aus for compliance then why couldn't the OP find the same rubber? That's what I was thinking. :)

If they were changed in Aus for compliance then why couldn't the OP find the same rubber? That's what I was thinking. :)

Because the front sizing of 225/45 R19 and they're not a common size in the Australian market. I certainly can't score my preferred brand/model in that size so I settled for a 225/40 R19 profile instead.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Did this end up working? Did you take some pictures?
    • And finally, the front lower mount. It was doubly weird. Firstly, the lower mount is held in with a bracket that has 3 bolts (it also acts as the steering lock stop), and then a nut on the shock lower mount itself. So, remove the 3x 14mm head bolts , then the 17mm nut that holds the shock in. From there, you can't actually remove the shock from the lower mount bolt (took me a while to work that out....) Sadly I don't have a pic of the other side, but the swaybar mounts to the same bolt that holds the shock in. You need to push that swaybar mount/bolt back so the shock can be pulled out past the lower control arm.  In this pic you can see the bolt partly pushed back, but it had to go further than that to release the shock. Once the shock is out, putting the new one in is "reverse of disassembly". Put the top of the shock through at least one hole and put a nut on loosely to hold it in place. Put the lower end in place and push the swaybar mount / shock bolt back in place, then loosely attach the other 2 top nuts. Bolt the bracket back in place with the 14mm head bolts and finally put the nut onto the lower bolt. Done....you have new suspension on your v37!
    • And now to the front.  No pics of the 3 nuts holding the front struts on, they are easy to spot. Undo 2 and leave the closest one on loosely. Underneath we have to deal with the wiring again, but this time its worse because the plug is behind the guard liner. You'll have to decide how much of the guard liner to remove, I undid the lower liner's top, inside and lower clips, but didn't pull it full off the guard. Same issue undoing the plug as at the rear, you need to firmly push the release clip from below while equally firmly gripping the plug body and pulling it out of  the socket. I used my fancy electrical disconnect pliers to get in there There is also one clip for the wiring, unlike at the rear I could not get behind it so just had to lever it up and out.....not in great condition to re-use in future.
    • Onto the rear lower shock mount. It's worth starting with a decent degrease to remove 10+ years of road grime, and perhaps also spray a penetrating oil on the shock lower nut. Don't forget to include the shock wiring and plug in the clean.... Deal with the wiring first; you need to release 2 clips where the wiring goes into the bracket (use long nose pliers behind the bracket to compress the clip so you can reuse it), and the rubber mount slides out, then release the plug.  I found it very hard to unplug, from underneath you can compress the tab with a screwdriver or similar, and gently but firmly pull the plug out of the socket (regular pliers may help but don't put too much pressure on the plastic. The lower mount is straightforward, 17mm nut and you can pull the shock out. As I wasn't putting a standard shock back in, I gave the car side wiring socket a generous gob of dialectric grease to keep crap out in the future. Putting the new shock in is straightforward, feed it into at least 1 of the bolt holes at the top and reach around to put a nut on it to hold it up. Then put on the other 2 top nuts loosely and put the shock onto the lower mounting bolt (you may need to lift the hub a little if the new shock is shorter). Tighten the lower nut and 3 upper nuts and you are done. In my case the BC Racing shocks came assembled for the fronts, but the rears needed to re-use the factory strut tops. For that you need spring compressors to take the pressure off the top nut (they are compressed enough when the spring can move between the top and bottom spring seats. Then a 17mm ring spanner to undo the nut while using an 8mm open spanner to stop the shaft turning (or, if you are really lucky you might get it off with a rattle gun).
    • You will now be able to lift the parcel shelf trim enough to get to the shock cover bolts; if you need to full remove the parcel shelf trim for some reason you also remove the escutcheons around the rear seat release and you will have to unplug the high stop light wiring from the boot. Next up is removal of the bracket; 6 nuts and a bolt Good news, you've finally got to the strut top! Remove the dust cover and the 3 shock mount nuts (perhaps leave 1 on lightly for now....) Same on the other side, but easier now you've done it all before
×
×
  • Create New...