Jump to content
SAU Community

Recommended Posts

R32 GTST wastegate actuator. Upgrade your R33 or R34 actuator with this one to run 10psi. $50

GTR bov with rubber hose to suit gtst/gtt $50

Silicone intake pipe to suit gtst/gtt $50

UAS master cylinder stopper to suit gtst/gtt $50

Brand new Permacool/B&M oil cooler kit (no lines included) $200

Ford Falcon AU thermo fans with shroud to replace standard clutch fan $50

Standard intake pipe to suit R34 GTT $20

Standard castor rod arms R33/R34 $20

Thanks,

Dave

Link to comment
https://www.sau.com.au/forums/topic/409972-skyline-parts/
Share on other sites

Hey mate, would you post the R32 actuator & GTR BOV to Canberra 2911 for $100 all up?

Cheers.

Rob.

PM Failed,

The member wisey18 cannot receive any new messages.

Edited by Not a Pulsar
Link to comment
https://www.sau.com.au/forums/topic/409972-skyline-parts/#findComment-6546609
Share on other sites

Acutator and bov sold!

Boost controller sold pending payment.

R34 Nismo wing stickers $20 including postage

R34 fire extinguisher and bracket. Bolts up to front passenger seat bolts with no cutting etc. Good for track days ect. $30 + postage. Pickup preferable.

Rare Do-luck b-pillar brace. Brace up your chassis! R32, R33 and R34. $300 + postage. Pickup preferable.

Genuine carbon fibre R34 GTT gauge surround $100 including postage

post-44349-0-00626400-1348651119_thumb.jpg

post-44349-0-23298100-1348651133_thumb.jpg

post-44349-0-46183700-1348651147_thumb.jpg

post-44349-0-73414900-1348651171_thumb.jpg

post-44349-0-39041800-1348651186_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/409972-skyline-parts/#findComment-6551838
Share on other sites

post-44349-0-58663500-1349338317_thumb.jpg

UAS brake master cylinder stopper $50

post-44349-0-94339200-1349337687_thumb.jpg

Full 3" turbo back exhaust for R34 GTT.

Batmbl split dump/front pipe

Ballistic metal race cat

R34 Nismo GTR cat back exhaust without mid muffler. Not loud. Nice note.

Only used for about 20,000km

$500 for the lot.

Link to comment
https://www.sau.com.au/forums/topic/409972-skyline-parts/#findComment-6563522
Share on other sites

Items still for sale... must go: Prices dropped.

Silicone intake pipe to suit gtst/gtt $40 posted.

UAS master cylinder stopper to suit gtst/gtt $50 posted.

Brand new Permacool/B&M oil cooler kit (no lines included) $180 posted.

Ford Falcon AU thermo fans with shroud to replace standard clutch fan $50

Standard intake pipe to suit R34 GTT $20 posted.

Standard castor rod arms R33/R34 $20 posted.

R34 GTT Nismo wing stickers $20 posted.

Rare Do-luck b-pillar brace. Brace up your chassis! R32, R33 and R34. $250 + postage. Pickup preferable.

Full 3" turbo back exhaust for R34 GTT.

Batmbl split dump/front pipe

Ballistic metal race cat

R34 Nismo GTR cat back exhaust without mid muffler. Not loud. Nice note.

Only used for about 20,000km

$400 for the lot.

Link to comment
https://www.sau.com.au/forums/topic/409972-skyline-parts/#findComment-6570392
Share on other sites

  • 2 weeks later...

how much for turbo back exhaust for r34 gtt ?? condition ?? got pics ?? where are you located ??

http://www.skylinesaustralia.com/forums/topic/409972-skyline-parts/page__view__findpost__p__6563522

I'm located near Camden.

Link to comment
https://www.sau.com.au/forums/topic/409972-skyline-parts/#findComment-6604293
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...