Jump to content
SAU Community

V35 Replacement Keys In Syd?

StevezAU

By StevezAU,
in Car Audio & Electrical

 Share

Recommended Posts

StevezAU Rookie

StevezAU

Posted
Posted

Hi All,

I've lost my keys and am now down to my spare set.

I managed to get replacement remote for my autowatch alarm ($40 per remote), it was easy to program.

Now I need to get the key for the car cut and from my searching on google it appears the key has a chip which will need to be programmed.

The dealer quotes me $500 or so to get 1 replacement key! Then another $100 or so to get it programmed.

I've read people using locksmits all over aus at way cheaper prices but am struggling to find one in Syd..

anyone got some contacts that can help?

Thanks

Steve!

Link to comment
https://www.sau.com.au/forums/topic/409985-v35-replacement-keys-in-syd/
Share on other sites
  • 2 weeks later...
GTR-N1 Grand Master

GTR-N1

Posted
Posted

Chris was referring to the place (ie Nissan) where the actual key is obtained.

Just Jap in Kirrawee does not stock the G35 Transponder type key; but if you wish to wait, they could get it in.

Sydney:-

Just Jap for instance stocks the R34 GT-R key for $129 - less discount for SAU Members

Abbotts Locksmiths can cut the key from either i) computer code which is most accurate or ii) your other key for $60

JapLink Motors can programme your newly cut key, so long as you bring your current key (for matching), for $20

All up cost would amount to $200

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • PranK
      New lightweight, square wheel/tyre combo for the E90

      By PranK · Posted

      Nah, nothing formal, just open track days. Mostly small and tight circuits but I would like to get back out to Eastern Creek at some stage.
    • Murray_Calavera
      New lightweight, square wheel/tyre combo for the E90

      By Murray_Calavera · Posted

      What type of track driving will you be doing?  Do you have a set of class rules you need to abide by that will limit your rim / tyre width?
    • PranK
      New lightweight, square wheel/tyre combo for the E90

      By PranK · Posted

      I've been reading a lot lately about unsprung weight and how beneficial it can be to reduce it for driving on the track, given my semi's only have another day or two in them I am throwing around the idea of some lighter wheels and a square set up. I have 265/35/19's and 245/40(?)/19 Federal 595's at the moment. The wheels and tyres are super heavy. I looked up my wheel weight online and got 14.5kg naked. Not sure if this was 8.5 (front) or 9 (rear) but that's a lot. I have also been reading about the benefits of a square setup. Much better rotation and potentially less understeer.  When I throw these together I'm thinking about a 17x9 or 18x9 square (preferably under 10kgs per wheel) with 245 or 255's. I can get some cheap 17x8.5 BMW M Sport wheels, they weight 10.5 kg's each but at 8.5 wide could probably only get 245's on them? I know they come with 255's from factory but semi's are a bit chunkier. Otherwise it will be aftermarket wheels in a 9" width. Most of the other BMW wheels are heavy unless you pay a squillion dollars for some M wheels.  Although, the E46 M3 Style 67's could be good but I'd have to buy 2 sets to square them up.  My car has a tickle over 400hp and about to put an LSD in also, is 245 a little thin for a square setup? It kinda feels that way to me. Also, is there any tangible benefit to having 18's over 17's? Is the footprint demonstrably bigger? From those of you who went to light(er) wheels after heavy buggers, did you notice it much?
    • GTSBoy
      RB26dett R33 gtst swap

      By GTSBoy · Posted

      Start with the R32 GTR wiring diagram. The ECU is essentially the same, so the pinouts are good. The details around ECCS relays, etc might differ a little bit, but the reality is that you need to get ignition power to kick the ECU so it powers up the ECCS relay which brings the rest of the ECU up. This also gives power to the other circuits that are needed to make the engine run, like the ignition coils, etc. All of this is visible on the R32 diagram and should give you a strong guide, even if it's not quite the same as the R33. As to specifics - I'm pretty sure no-one can help you from afar, as there is no way to know what mistake or omission has been made in connecting stuff up. It always turns out to be "LOL, I shorted something and an entire wire vanished out of the loom", or "We never connected X or Y main connector", or "shit, you mean I need to have that fuse installed?".
    • r33.antwone
      RB26dett R33 gtst swap

      By r33.antwone · Posted

      hello wanted some insight on what my problem could be so i swapped a RB26DETT into my r33 gtst used a R33 GTR engine harness and im using a haltech platinum pro. The car cranks but no start the ecu isn’t getting any power now im trying to find out why i cant seem to find any schematics  or diagram for the engine harness for the r33 gtr anything helps thank you.
×
×
  • Create New...