Jump to content
SAU Community

Recommended Posts

Pair-17x9+18

WEDS Professor mesh

Discontinued

have gutter rash and could use a polish on the dish

Come wrapped in 225/45/17 Federal RSR's ($400+ of tyre) that have only done 3 or 4 sessions drifting

Just clear R23/33 rear brakes, will need a 20-30mm spacer to fit on the front, but can fit under s14 guards with 3ish deg camber with a 30mm bolt on on the front

$850

6037252303_bdb061617c_b.jpg

IMAG0072.jpg

IMAG0044.jpg

425990_307111876004634_278229208892901_798571_565966680_n.jpg

Pair-17x9+20 equips,,,,, small lip 3ish cm

light rash/scratches. No tyres

$250 .... payed over $400 for these from japan

IMAG0356-1.jpg

Pair-17x10+30 meisters

10cm or so cm dish

Light rash... 1 has 10cm or so deep rash

Thrashed tyres

$750

IMAG0159.jpg

IMAG0577.jpg

IMAG0578.jpg

Speedy wheels

16x7+35??????????????????? no idea tbh

only 3 usuable, one I had to cut off the car :lol:

2 tyres just above indicators, the other 2 70+% 225/50or55/16

$50

IMAG0483.jpg

IMAG0482.jpg

R32 GTR passenger seat

Modded rail to bolt straight in to S chassis

1 cig burn, could use a steam clean

$200

IMAG0574.jpg

Stock S14 Kouki tail lights

3 piece lights and garnish

The option/luxury type with the grey surrounds compared to the dark black

$300

40151_1578160007977_1054948418_31695964_6633882_n.jpg

IMAG0060.jpg

Stock s14 Parker lights

$70 for the pair

Located Campbelltown NSW

post at buyers expense

Link to comment
https://www.sau.com.au/forums/topic/410002-workweds-wheels-other-goodies/
Share on other sites

Bought a set of rims for my daily that have Yokohama's on the rear. There a waste on my car and a little to big so seeing if there is any interest.

They are Advan Sport in a 275/35/R18 and have a tread wear of 180.

These are USED, but still have 5mm of tread groove on the inner/cambered side and are not excessively camber worn.

The have scrub marks from the 10 min drive I did with them on the car as it fouls on the last 1mm of the inner lip as guards haven't been rolled yet. And If I lower the car they are to fat and sill prob scrub on the inner guards

These go for $300 a corner new.

Will only sell if someone is 100% on them and then I'll remove them. Otherwise I'll put them on the car after the guards are rolled and wait till there dead before putting new tyres on and lowering.

IMG_5431.jpg

IMG_5432.jpg

IMG_5433.jpg

Fronts are bald on inner edged (and 245's) so not worth keeping

so $120 for the rear pair with decent tread

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...