Jump to content
SAU Community

Recommended Posts

As per topic, just inquring on the normal operating temperature for an R33. I have owned the car for about 3 months so not sure what is normal. It has a Blitz water gauge that reads in the mid to high 80's from driving normally.

Does this sound correct? At what temp would I need to be concerned. BTW it has a larger radiator.

Cheers,

Link to comment
https://www.sau.com.au/forums/topic/410293-normal-temps-for-r33-gts-t/
Share on other sites

I also wanted to query this...

I have an aftermarket temp sensor in the top hose (which is i gather just after where the OEM sensor sits?- in the housing just before the top hose)

anyway, this thing reads 86 degrees stable as the point where the thermostat has opened and obviosuly circulating coolant- i.e. it is the lowest operating temp indicated with the motor at operating temp.

But if i plug into the ecu it is displaying 72 degrees.

any body know what the gig is here?

Edited by jjman

I also wanted to query this...

I have an aftermarket temp sensor in the top hose (which is i gather just after where the OEM sensor sits?- in the housing just before the top hose)

anyway, this thing reads 86 degrees stable as the point where the thermostat has opened and obviosuly circulating coolant- i.e. it is the lowest operating temp indicated with the motor at operating temp.

But if i plug into the ecu it is displaying 72 degrees.

any body know what the gig is here?

Your coolant temp sensor could be slightly out. New ones are about $30 from Repco but you need to match up the part by picture or go to tridon's website and find it there. I forget the number now

are you referring to a replacement for the aftermarket one i have or the OEM one?

OEM

My gauge shows 10 degrees above what the laptop says, so Dan a new sensor will fix it? Or could the gauge be out?

Well, the gauge could be out but your CTS is 15-20 years old if it hasn't been replaced. 10 deg isn't much. Noel's black 33 had a similar issue where he thought it was getting super hot but I replaced the CTS and it all came back to normal readings

mine ran over 85 a while back and i could hear it pinging so i dont think over 85 is too good

If thats the case i dont think the temperature is your problem.

The stock thermostat isnt fully open till 85 odd degrees anyway.

Mine sits around 85-88.

Even into the 90's isnt a problem.

If thats the case i dont think the temperature is your problem.

The stock thermostat isnt fully open till 85 odd degrees anyway.

Mine sits around 85-88.

Even into the 90's isnt a problem.

the pinging was related to putting on a quiet restrictive muffler, and that seemed to increase the coolant temp's as high as 89deg,

these days it wont go higher than low 80's.

have you noticed the car loosing any performance when its running at 90deg?

Edited by SliverS2

the pinging was related to putting on a quiet restrictive muffler, and that seemed to increase the coolant temp's as high as 89deg,

these days it wont go higher than low 80's.

have you noticed the car loosing any performance when its running at 90deg?

So then id say that the restrictive muffler had everything to do with the pinging if your car was tuned to a more free flowing item possibly. Not coolant temps?

No performance loss whatsoever running into the 90's. I only had my tune dialled back when it went over 99 degrees. Boost limited to 1bar. I pushed it up to a peak of 107. heh. Was getting frustrated with only getting in 2 hot laps before it was cutting. Then found out that i only had a single core non turbo radiator dealing with 290rwkw :) Cant say i looked at it that closely till then lol!

Edited by gotRICE?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
×
×
  • Create New...