Jump to content
SAU Community

Recommended Posts

As per topic, just inquring on the normal operating temperature for an R33. I have owned the car for about 3 months so not sure what is normal. It has a Blitz water gauge that reads in the mid to high 80's from driving normally.

Does this sound correct? At what temp would I need to be concerned. BTW it has a larger radiator.

Cheers,

Link to comment
https://www.sau.com.au/forums/topic/410293-normal-temps-for-r33-gts-t/
Share on other sites

I also wanted to query this...

I have an aftermarket temp sensor in the top hose (which is i gather just after where the OEM sensor sits?- in the housing just before the top hose)

anyway, this thing reads 86 degrees stable as the point where the thermostat has opened and obviosuly circulating coolant- i.e. it is the lowest operating temp indicated with the motor at operating temp.

But if i plug into the ecu it is displaying 72 degrees.

any body know what the gig is here?

Edited by jjman

I also wanted to query this...

I have an aftermarket temp sensor in the top hose (which is i gather just after where the OEM sensor sits?- in the housing just before the top hose)

anyway, this thing reads 86 degrees stable as the point where the thermostat has opened and obviosuly circulating coolant- i.e. it is the lowest operating temp indicated with the motor at operating temp.

But if i plug into the ecu it is displaying 72 degrees.

any body know what the gig is here?

Your coolant temp sensor could be slightly out. New ones are about $30 from Repco but you need to match up the part by picture or go to tridon's website and find it there. I forget the number now

are you referring to a replacement for the aftermarket one i have or the OEM one?

OEM

My gauge shows 10 degrees above what the laptop says, so Dan a new sensor will fix it? Or could the gauge be out?

Well, the gauge could be out but your CTS is 15-20 years old if it hasn't been replaced. 10 deg isn't much. Noel's black 33 had a similar issue where he thought it was getting super hot but I replaced the CTS and it all came back to normal readings

mine ran over 85 a while back and i could hear it pinging so i dont think over 85 is too good

If thats the case i dont think the temperature is your problem.

The stock thermostat isnt fully open till 85 odd degrees anyway.

Mine sits around 85-88.

Even into the 90's isnt a problem.

If thats the case i dont think the temperature is your problem.

The stock thermostat isnt fully open till 85 odd degrees anyway.

Mine sits around 85-88.

Even into the 90's isnt a problem.

the pinging was related to putting on a quiet restrictive muffler, and that seemed to increase the coolant temp's as high as 89deg,

these days it wont go higher than low 80's.

have you noticed the car loosing any performance when its running at 90deg?

Edited by SliverS2

the pinging was related to putting on a quiet restrictive muffler, and that seemed to increase the coolant temp's as high as 89deg,

these days it wont go higher than low 80's.

have you noticed the car loosing any performance when its running at 90deg?

So then id say that the restrictive muffler had everything to do with the pinging if your car was tuned to a more free flowing item possibly. Not coolant temps?

No performance loss whatsoever running into the 90's. I only had my tune dialled back when it went over 99 degrees. Boost limited to 1bar. I pushed it up to a peak of 107. heh. Was getting frustrated with only getting in 2 hot laps before it was cutting. Then found out that i only had a single core non turbo radiator dealing with 290rwkw :) Cant say i looked at it that closely till then lol!

Edited by gotRICE?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Will have a look at that. I cant see any leaks 
    • Put another overflow bottle (ie, a 1.25 coke bottle or similar) under the overflow hose and see if it is being pushed out there or if it is disappearing into the engine.
    • Staring on a stand is no issue. You just have to wire everything up, give it fuel and cross your fingers that the stand is robust enough. Arranging the inlet plumbing is often the hardest part, without any surrounding structure to hand some of it from. No need for coolant if you only want to run it for <1 minute. As to the gearbox - I think the little Aisin box is a bit stronger than the other small Nissan boxes that went behind SRs, but I wouldn't be too keen to test its limits with the torque of a boosted 25. I don't know if you can retain the box and the tailshaft. The box won't connect to the RB without an adapter of some sort, which is either a plate that will push the engine forward (which is not good for fitting it into the bay's available space) or push the box back, which messes with the box position and tailshaft length - OR - cut and shut work on the bellhousing, which is a long way from "least modification". I'd be buying a new 370Z 6 speed or similar, doing what has to be done to that to make it fit RB (ie, cut and shut bellhousing) and the requisite tailshaft custom/mods.
    • Hi Everyone I am from West Pennant Hills in NSW. Been too busy until recently to attend to my RB25DET Series 2 engine until recently. I am planning to stick it into the S15 shell at this stage, unless a nice SR20DET turns up... For now, i am going to try and get the RB25 running and working well then decide what gearbox to use. My preference is to retain the SR20DET  6 speed gearbox and tail shaft to retain as much and least modifications as i can avoid. I am an old guy and won't be doing any heavy drifting so i don't need a bullet proof gearbox Does anyone have experience with starting the RB on a stand? I got everything setup as much as I can with the info i can find... endless searching and videos on Youtube I would be great to get some pointers Cheers Songo
    • Hey all, Recently have had my s1 r33 gtr serviced and noticed my coolant reservoir was topped up to the max line. Took the car out for 1 yesterday and noticed today the reservoir is completely empty.  Any ideas? Radiator is full
×
×
  • Create New...