Jump to content
SAU Community

Recommended Posts

Many people have asked what power i'm getting from my new HKS 2535 which I bought a few months ago so I thought I'd share the results.

Best run = 339RWHP @ 1.12 bar

Consistent = 312RWHP @ 1 bar

Power seems about right for the turbo. However, it wouldn't be my car if it didn't have a problem and in this case, it's a great big dirty hole in my power band which seems my power drop from 280ish back to 200 then shoot back up to peak, all between 5500 and 7000 rpm. It's totally weird.

If anyone has any insights as to how to allivate this hole, please, please tell me. At the moment, we are thinking it may have something to do with the Z32 AFM not talking with my S-AFCII correctly :confused:

Stay tuned for hopefully better results to come.

Cheers!

Sorry, no dyno graph

Link to comment
https://www.sau.com.au/forums/topic/41032-hks2535-on-rb25det-resultsround-1/
Share on other sites

  • Replies 56
  • Created
  • Last Reply

Top Posters In This Topic

Hows response compared to stock, id imagine not too much of a drastic change, it looks like you should be making some good power, and right across the range too.

I'd have to agree with Joel, rather than just running an S-AFC, why not hook up a PFC? It may give you better insight into your problem and would probably make it easier to fix.

rbs13: Yeah, the maximum of 339HP would equate to 250rwkw :D

Denton33: Stock actuator that came with standard turbo

bOneR: Yeah, response is very similar to stock, only a few rpm higher with good power early on. Unfortuately graph doesn't show RPM but it was at 216hp by 104km/h in 4th. $$ prohibit the PFC at the moment however, that will more than likely be the end case for my car - just a matter of when.

as the safc still retains the stock computer i would believe that it would be pulling shitloads of timing, even thou u r using a z32 afm, which would cause ur huge power dip. Its unfortunate, but the stock ecu still has the final say. I am having the same problems as ur are now.

Like everyone else says, get a full ecu like a pfc.

Yeah i also have an SAFC II and i have heard so many ppl with problems when changing to a Z32 AFM. that is your problem there. either go back to standard or go PFC. I dont think the SAFC really has the best ability to control a different AFM reading and convert it to the std ECU.

Enrico - Yeah, i figured as much...bloody stock ECU.

bbeny - I've just re-installed my stock AFM and haven't had a problem with boost cut yet so i'll see how I go when I put it back on the dyno

snake - Glad I could help :P

franks - stock injectors, but upgraded fuel pressure regulator but i'm unsure of the pressure. Clutch is an 9 puck jobbie with 2200lb pressure plate. Xtreme I think it is - same as what Adelaide Clutch Services produce.

sounds like an ecu based ignition/NVCS issue. The 5000rpm point is where the NVCS knocks off for the day.

Try backing the base timing off 5-8 degrees and try unplugging the NVCS, see if you get the same issue, takes 5min to do in the driveway.

yeah, it's a bit louder and a bit deeper :rofl: but not noticably, well, until you put the boot into it (and boost!) and then she really wails. However, the noise of the pod and turbo spoolin is loud enough to drain out the noise from inside the cabin at least. My car is VERY quiet though compared to a lot of them.

yeh franks, 2530 usually good for 230-240rwkws.

i dont think so, due to the fact that as mentioned a 2530 on an rb25 wont hold boost up top, i have tried every avenue to fix this on mine, 227rwkw was the max we saw with no cat. for over 230rwkw id say youd have to go for the next step up, the 2535.

exhaust housing on 2530 too small for 2.5 litres and spins out of efficiency over 5grand. There has been a lot of talk about a 2530 being good for up to 250rwkw, but this is not so. ideally it is suited to the rb20 where exh gas flow is not so high.

excellent result for the 2535! this is what i should have started out with. 2530 is extremely punchy, but the inability to hold boost makes a flat-feeling top end.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...