Jump to content
SAU Community

Recommended Posts

Okay I'm looking for a 5/6 spoke racing wheels for my N/A R34 coupe, I have found several and currently choosing between varrstoen 2.2.1 and the rota grid and GTR'D/P45R but I'm having trouble picking one due size and fitments, I want P45R's but I want to go 18's but the only available width's are 9.5 and 10.5 at 12+ offset which apparently sit outside the guards which I do not want I want to keep it flush and lined up inside the guard, NOW I've been told that it can be down the back ones will sit in but it's just the front 2 wheels which will need camber arrangements and guard rolling but it'll still sit outside??? the guard..I just need some inform and recommended sizes and fitments?

But the rota girds would fit perfectly fine because they have sizes available 18's by 8.5 with offsets from 12+ to 30+ which will fit fine but my only concern is that the spoke style is a little aggressive for an R34 25GT opinions would be awesome?> if any one has them maybe a photo?

and my last question is the Varrstoen 2.2.1 they only have 18 by 9.5 but the offsets go from 12+ to i think 30+ which to what I think the wheels will sit inside the guard fine or the camber/tyre will need to adjusted?

In the end I want that concave dish fill like with te37's on a GTR R34

cheers thank you

Link to comment
https://www.sau.com.au/forums/topic/410694-wheelsrims-question-need-help/
Share on other sites

thanks, I've been told koya drift tek 18 by 8.5 front and 9.5 rear with with 18+ offset fits flush and looks wicked

+18 with a 9.5 inch rim will be seriously pushing it on a 34, would like good with some guard work and camber.

I have 17x9" rims on my 33 and with +28 the sit quite well, with a 9.5 inch rim that makes it the equivalent of +40ish to sit the same... So anything under Probley a +25/30 will be pushing it.

(better yet borrow ur mates rims, test fit, profit lol)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
×
×
  • Create New...