Jump to content
SAU Community

Recommended Posts

as in the : http://www.skylinesaustralia.com/forums/topic/346667-servicing-your-v35-list-of-whats-needed/ the best i have used and still use is Penrite SIN 600 (super DOT 4) realisticaly brake fluid is still brake fluid you will only see minor differences but for the best results i do recomend either the Penrite 600 or MOTUL.

Link to comment
https://www.sau.com.au/forums/topic/411628-brake-fluid/#findComment-6581200
Share on other sites

For a normal road car, you will be fine with a decent qualtiy 'off the shelf' dot4 fluid.

If you do any track work, or other driving which requires excessive repeated braking, then go with a higher spec fluid with a higher boiling point.

Link to comment
https://www.sau.com.au/forums/topic/411628-brake-fluid/#findComment-6581274
Share on other sites

Thanks for the input. Wasn't sure if Penrite was the way to go. Little sceptical after their motor oil assisted in blowing up my previous SR20... :/

Pretty sure the Penrite Sin 600 is in the DIY servicing list of oils to use for our car, that's where i got it from

Link to comment
https://www.sau.com.au/forums/topic/411628-brake-fluid/#findComment-6581324
Share on other sites

My brother-in-law linked me to this a while ago.

http://www.animegame.com/cars/Oil%20Tests.pdf

While it's specifically for engine oil, it just shows you how 'expensive' brands can absolutely suck.. So, it's good to do your research! I usually put Mobil One Gold bottle in, and the chunk that was left was the biggest there! I'll be going for Royal Purple next time..

As for brake fluid. TRW GP600 Brake Fluid is what I normally use.

Link to comment
https://www.sau.com.au/forums/topic/411628-brake-fluid/#findComment-6582223
Share on other sites

My brother-in-law linked me to this a while ago.

http://www.animegame...Oil%20Tests.pdf

While it's specifically for engine oil, it just shows you how 'expensive' brands can absolutely suck.. So, it's good to do your research! I usually put Mobil One Gold bottle in, and the chunk that was left was the biggest there! I'll be going for Royal Purple next time..

As for brake fluid. TRW GP600 Brake Fluid is what I normally use.

that link is great !

But not vq35de specific.. Royal Purple is actually not that great in our engines.

Mobil 1 and shell rotella t6 seem to do well.

Link to comment
https://www.sau.com.au/forums/topic/411628-brake-fluid/#findComment-6582735
Share on other sites

Interesting read, but not really relavant, you can't just do one test and then proclaim the oil that performed best in that test as the most appropriate oil for any engine without testing all other conditions the oil will face inside an engine. Especially if the test conditions exceed any conditions found in an engine.

Link to comment
https://www.sau.com.au/forums/topic/411628-brake-fluid/#findComment-6582859
Share on other sites

Depends on what the intervals are. Synthetic left in there for 20k kms will turn to liquid faeces. Crappy spec oil will do tops 5k i reckon.

However if you're doing changes at $60/bottle every 5000kms it works out to be more exxy than $100/bottle at 10000kms. Both will be in very similar condition at the end of their relative lives.

However, if you speak to Harold at Performancelub.com you can get 5qts of Royal Purple for about $70 or Mobil 1 for $65. WIN!

Link to comment
https://www.sau.com.au/forums/topic/411628-brake-fluid/#findComment-6585777
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Apologies for the long post, but needed somewhere to lay out the entire timeline of events and actions taken:   I've got an 89 GTR with a R34 RB in it. It's been running great all year, driven probably 500KM in the last month. It's not my daily driver, just a weekend fun car.    Build info: R34 RB26 - HKS 2.7 stroker kit, HKS adjustable cam gears, HKS turbo upgrades, Trust intercooler, R34 factory DENSO 440cc injectors, JUN chipped/tuned R32 ECU. All of this work was performed in Japan back in 2019.    Thursday 10/2/25 - It's a nice day and decided I'll drive it to work, I start it up in the garage and I notice it took a few extra cranks and sounded a bit funny. I figure maybe it was just because it was a pretty chilly morning. I pull it out into the driveway to warm up a bit before leaving. As I leave the driveway, it feels very off and sounds like a misfire. I pull it back in the garage to deal with after work and take the daily to work. I was able to diagnose it as a cylinder 5 misfire with the old spark plug test (unplugging each plug until a sound change with the engine running). I take off the whole ignition system, ignitor, plugs, spark. *Important note, it is still on the R32 ignition system with the separate ignitor system. I test each system with a multi-meter and nothing presents as a smoking gun. I put it all back together and it starts up no issue. I go ahead and order the PRP R35 ignition conversion kit. It should arrive today (10/13/25)   Friday 10/3/25 - Another nice day, car starts up great and drives great all day. Very pleased that everything seems to be OK   Sunday 10/5/25 - Decided I'll take it to play some golf, load up and drive to the course about 25 minutes away. Drives wonderful the whole way there, I pull in the parking lot and the engine completely comes to a stop. I do not recall if it sputtered at all, but just remember all of the sudden the engine was off. I roll it into a parking spot, try to crank it back on and nothing.  It'll crank and crank and not even try to start. End up getting it towed back to my house and push it up into the garage.    Items I have checked: Fuel in the tank Fuel Pump relay Fuel pump fuse  Spark Plugs & gap Coil packs Ignitor    I know the cylinders are getting fuel as the plugs smell like fuel after a start attempt. I tried spraying starter fluid into the manifold and cranking and not even a sputter.    I decided to do the live CAS test (removing the the CAS, ignition on and spinning the CAS stalk to see if the injectors pulse and spark is active). All of the injectors were pulsing and I have spark at the plug. The half-moon end of the CAS did seem very loose, I'm not sure how much play is supposed to be there, but it was more than I expected. There was no in/out play of the shaft, just the tip end that is pinned on had quite a bit of play.    CAS Play video   When I put the CAS back in, I stupidly did not re-time the engine. I know I need to do that tonight, however, I do not think it will start given it seemingly was not the issue. My plan is to do the PRP R35 coil kit and retime the engine at the same time.    I plan on ordering the Haltech Nexus Plug-in ECU once they are available again, but ideally would like to get this sorted before firing the parts cannon at it and potentially adding more variables.    Anything glaring that I am missing here, I'm a bit at a loss?          
    • Get it on a dyno. Get something logging Consult. Run it up and find out what is causing it.
    • Looking for a plenum for rb25 de+t neo  Not looking to push much power maybe 300kw at the wheels, is there much difference in flow for Freddy “Greddy style” compared to original Greddy or options like Proflow or Otaku garage?    I won’t be porting the de Neo head for now as I think it’ll be fine 280-300rwkw but appreciate the help and any experiences anyone has between them and any advice. Thanks  Looking at this plenum for now below 
    • engine wise almost no mods: stock ecu Greddy front mount intercooler Greddy forward facing intake w R33 TB stock fuel system, stock injectors, rail etc. Kakimoto racing hyper 3 inch exhaust system Apexi intake filter New NGK –R BCPRES (.8 gap) plugs  
    • Nice one @Pac - looks like a fair few 1600's there! 
×
×
  • Create New...