Jump to content
SAU Community

Recommended Posts

as in the : http://www.skylinesaustralia.com/forums/topic/346667-servicing-your-v35-list-of-whats-needed/ the best i have used and still use is Penrite SIN 600 (super DOT 4) realisticaly brake fluid is still brake fluid you will only see minor differences but for the best results i do recomend either the Penrite 600 or MOTUL.

Link to comment
https://www.sau.com.au/forums/topic/411628-brake-fluid/#findComment-6581200
Share on other sites

For a normal road car, you will be fine with a decent qualtiy 'off the shelf' dot4 fluid.

If you do any track work, or other driving which requires excessive repeated braking, then go with a higher spec fluid with a higher boiling point.

Link to comment
https://www.sau.com.au/forums/topic/411628-brake-fluid/#findComment-6581274
Share on other sites

Thanks for the input. Wasn't sure if Penrite was the way to go. Little sceptical after their motor oil assisted in blowing up my previous SR20... :/

Pretty sure the Penrite Sin 600 is in the DIY servicing list of oils to use for our car, that's where i got it from

Link to comment
https://www.sau.com.au/forums/topic/411628-brake-fluid/#findComment-6581324
Share on other sites

My brother-in-law linked me to this a while ago.

http://www.animegame.com/cars/Oil%20Tests.pdf

While it's specifically for engine oil, it just shows you how 'expensive' brands can absolutely suck.. So, it's good to do your research! I usually put Mobil One Gold bottle in, and the chunk that was left was the biggest there! I'll be going for Royal Purple next time..

As for brake fluid. TRW GP600 Brake Fluid is what I normally use.

Link to comment
https://www.sau.com.au/forums/topic/411628-brake-fluid/#findComment-6582223
Share on other sites

My brother-in-law linked me to this a while ago.

http://www.animegame...Oil%20Tests.pdf

While it's specifically for engine oil, it just shows you how 'expensive' brands can absolutely suck.. So, it's good to do your research! I usually put Mobil One Gold bottle in, and the chunk that was left was the biggest there! I'll be going for Royal Purple next time..

As for brake fluid. TRW GP600 Brake Fluid is what I normally use.

that link is great !

But not vq35de specific.. Royal Purple is actually not that great in our engines.

Mobil 1 and shell rotella t6 seem to do well.

Link to comment
https://www.sau.com.au/forums/topic/411628-brake-fluid/#findComment-6582735
Share on other sites

Interesting read, but not really relavant, you can't just do one test and then proclaim the oil that performed best in that test as the most appropriate oil for any engine without testing all other conditions the oil will face inside an engine. Especially if the test conditions exceed any conditions found in an engine.

Link to comment
https://www.sau.com.au/forums/topic/411628-brake-fluid/#findComment-6582859
Share on other sites

Depends on what the intervals are. Synthetic left in there for 20k kms will turn to liquid faeces. Crappy spec oil will do tops 5k i reckon.

However if you're doing changes at $60/bottle every 5000kms it works out to be more exxy than $100/bottle at 10000kms. Both will be in very similar condition at the end of their relative lives.

However, if you speak to Harold at Performancelub.com you can get 5qts of Royal Purple for about $70 or Mobil 1 for $65. WIN!

Link to comment
https://www.sau.com.au/forums/topic/411628-brake-fluid/#findComment-6585777
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
    • Thanks for the replies everyone. Definitely a coolant push. Oil catch can is empty and always has been. As the engine is out now I'll be having a good look over things. I do have some detonation on the piston tops from a trigger issue back about 5 years ago. I felt it and shut off then bought a new ecu and changed the trigger. Never been an issue since. It never hurt the power, its made almost 80hp more since that incident but I will pull the bearing caps to take a look. If the bearings are damaged I will do a bottom end refresh. Head is being re conditioned at the moment and the block will be cleaned and checked to ensure it's flat. I'll go with a kameari gasket and see how it ends up. The other thing I'm not super keen on is the cylinder colours. I suspect this is from the inlet manifold. The plan will be to put it back together, retune and then stick a plazmaman billet inlet on it and retune. I'm happy with the power, if it makes a little more, then great, but I would rather just make everything more efficient at this stage.
    • Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
    • Does it also misfire equally when revving?   Josh is very correct in what you should do. The coilpack harness wiring loom itself is a known problem due to its age and the number of heat cycles it has gone through. Throwing parts at a vehicle to diagnose the issue isn't a smart or good way to do it. Secondly, you may have a bad coil pack, you pop replacements in, they fix that issue, but messing with the harness breaks it, so the issue persists. So now you think "well it wasn't the coil packs" and have to continue chasing your tail, potentially swapping back in your shit coil packs and returning the good ones (yes, I've seen people do this because 'it wasn't the problem' and they want to save money). And suddenly, you've got two issues with the same symptoms...   Diagnose, don't use the spare parts shotgun.
×
×
  • Create New...