Jump to content
SAU Community

Recommended Posts

Hi Guys,

We are proud to announce we are the Sole Distributor of [Concave Concept Wheels], we'll let the rims speak for itself.

CC002-Twin 6 Spoke

DSC_0616_zps593be3b5.jpg

DSC_0617_zpscbc918af.jpg

DSC_0611_zps7f661610.jpg

DSC_0620_zps2a983ce2.jpg

Concave: Medium

Size: 18x8.5

Offset: +19

Colour: Gloss Bronze, Matt Black, Dark Gunmetal

Fitment: EVO 5-10, all skylines Honda's...

Cost: $275each

Concave: Deepest

Size: 18x9.5

Offset: +15

Colour: Gloss Bronze, Matt Black, Dark Gunmetal

Fitment: EVO 10, all Skylines w BBK, Honda's...

Cost: $300each

CC003-Twin 5 Spoke

DSC_0615_zps1439ef7c.jpg

DSC_0613_zpsfc82ac70.jpg

DSC_0624_zps74ee7973.jpg

Concave: Medium

Size: 18x9

Offset: +20

Colour: Gloss Bronze, Matt Black, Dark Gunmetal

Fitment: No EVO's, All Nissans (R32&R33 GTST will require 5mm slip on), Honda's...

Cost: $300each

CC003-Twin 5 Spoke

Concave: Deepest

Size: 18x10

Offset: +20

Colour: Gloss Bronze, Matt Black, Dark Gunmetal

Fitment: No EVO's (X will reuire 3mm slip on), All Nissans (R32&R33 GTST will require 3mm slip on), Honda's...

Cost: $325 each

CC003-Twin 5 Spoke

Concave: Super Deep

Size: 18x11

Offset: +20

Colour: Gloss Bronze, Matt Black, Dark Gunmetal

Fitment: No EVO's, All Nissans, Honda's...

Cost: $375each

  • 2 weeks later...



  • Similar Content

  • Latest Posts

    • Order for the 2025 model R35 GT-R were accepted from 3rd March and 26th August the last order rolled off the production line at the Tochigi plant. Concerning the R35 GT-R replacement, current Nissan CEO Ivan Espinosa said "Nothing has been decided about the GT-R at this time, but we are well aware that everyone is waiting. The GT-R will evolve and reappear in the future. Please be patient until that day comes." Nissan has a lot of issues with management and finances so take Espinosa's words with a big grain of salt. From what discussions I've had and read about here in Japan, not a lot of people are confident about Nissan's future, let alone the next GT-R. 
    • Thanks. We getting some parts along too so he will be solving the speed issue like next week so i will let you know what he came up with.   
    • 21 is explicitly the coils detected as the issue. Is it guaranteed the actual issue? No. Just the ECU thinks it is. When you say rattling, describe it better, get an audio clip as best you can if possible.
    • Yea got me coppers. Bad news is I just put them in and the car still has the light and shakes. I also noticed I hear like rattling coming from the exhaust piping right under me. Does 21 also have a possibility of being O2 sensors?   So, coil packs are good, the harness is good, the MAF is working, and obviously the spark plugs just replaced and working.
    • Make sure you drop the GTT base tune back in, and set your injectors again, this will remove anything playing up with it you may have removed. Possibly lean there as it's normally a fast transient going THROUGH atmospheric pressure, and a turbo motor would then quickly go richer as boost builds. The only worry you MIGHT have is ignition timing, as the DE is higher compression than the DET from memory. But again, you're not in boost, so the DE motor will be a lot more forgiving at atmospheric.   Get Murray, Kinkstahs, and Johnny's input on tuning haltechs, those guys have played with tuning enough in the past to be able to help now you're past the trouble shooting stage of the MAP issue
×
×
  • Create New...