Jump to content
SAU Community

Recommended Posts

Anyone here in sydney running E85 or E-Flex that's also got a zeitronix ethanol sensor kit (e.g. Alpha Omega kit) setup in their cars?

Just want to know what the average ethanol rating the sensor shows, from what I've heard caltex in the central coast seems pretty consistent at E70-72.

I'm targeting the E-Flex pumps at Ermington and Holsworthy as possible fill up servos, just wanted to know as ECU is currently prohibiting me from being able to utilise an ethanol sensor kit.

Link to comment
https://www.sau.com.au/forums/topic/412821-e-flex-in-sydney/
Share on other sites

im using the eth sensor with a link G4 ecu tuned by unigroup,

been getting my fuel from the caltex on the corner of Nuwarra and newbridge road, havent complety emptied a tank and put ethenol in it but id say its around the E70 range. They are still using the winter blend though and are supposed to be changing over to full 85 at the end of the month

Ive got the zeitronics ECA, but only use it tell me the Ethanol Content as I havn't done a flex tune.

I have found that rozelle united is always around 85%, sometimes 84-83 but never much less.

Only put caltex in once, got it from tempe and it was around the 78% mark..

im using the eth sensor with a link G4 ecu tuned by unigroup,

been getting my fuel from the caltex on the corner of Nuwarra and newbridge road, havent complety emptied a tank and put ethenol in it but id say its around the E70 range. They are still using the winter blend though and are supposed to be changing over to full 85 at the end of the month

nice :)

the Caltex at pendle hill near unigroup used to sit on e69-e70 but I havent used that in a few months

United e85 from Blaxland and Rozelle sits at e82 in mine

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I know I have to get a wheel alignment but until then I just need to bring the rear tyres in a bit they're wearing to the belt on the inside and brand new on the outside edge. I did shorten the arms a bit but got it wrong now after a few klms the Slip and VDC lights come on. I'd just like to get it to a point where I can drive for another week or two before getting an alignment. I've had to pay a lot of other stuff recently so doing it myself is my only option 
    • You just need a wheel alignment after, so just set them to the same as current and drive to the shop. As there are 2 upper links it may also be worth adding adjustable upper front links at the same time; these reduce bump steer when you move the camber (note that setting those correctly takes a lot longer as you have to recheck the camber at each length of the toe arm, through a range of movement, so you could just ignore that unless the handling becomes unpredictable)
    • I got adjustable after market rear camber arm to replace the stock one's because got sick of having to buy new rear tyres every few months. Can anyone please let me know what the best adjustment length would be. I don't have the old ones anymore to get measurements. I'm guessing the stock measurement minus a few mm would do it. Please any help on replacing them would be fantastic I've watched the YouTube clips but no-one talks about how long to set the camber arm to.
    • Heh. I copied the link to the video direct, instead of the thread I mentioned. But the video is the main value content anyway. Otherwise, yes, in Europe, surely you'd be expected to buy local. Being whichever flavour of Michelin, Continental or Pirelli suits your usage model.
    • Continental have consistently beaten the absolute shit out of every other performance tyre in Wet/Damp/Cold conditions and give up a little bit of time (half a second at most) in the dry. Almost like it's engineered for German conditions or something. I'd def give those a try.
×
×
  • Create New...