Jump to content
SAU Community

Recommended Posts

hey fellow skyline owners ive searched and searched and im not to happy with the results

so im wanting to know if 17x9s +22 will fit on the front without guard rolling and without spacers and look nice

and either the same for the rear 17x9 +22 or will a 17x10 +22 suit nice on the rear without spacers and rolling or should i stick with 17x9s all round

any help would be great thanks :)

Link to comment
https://www.sau.com.au/forums/topic/413120-r33-gtst-wheel-clearance/
Share on other sites

You will need to roll.

Depending on your ride height you'll either have a bit of poke in the front or it will sit completely flush.

In the rear you'd be looking at an 8mm or so spacer to match the front fitment.

so is that with 9 inch all round or 10s on the back

current ride height sits just above my wheels can have coilovers all round extremely stiff lol

just trying to work out if its a good size or not as i can get a whole set brand new for 800 delivered

This is 17x9 +22 all around on my car.

598887_3419140652128_1357731342_n.jpg

Don't have any pics but put an 8mm spacer on the other side and front and rear were perfectly inline with the guards. I'd say with 10's on the rear you'll probably have a bit of poke depending on camber settings.

looks mint so theres no spacers on the rear??

i havent done anything in regards to camber adjustment

i think ill just get 17x9s all round maybe see if i can get +15 for the rears i wonder what that will do

im a complete noob with offsets lol

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • If you take the top half of the intake off you can unbolt the flap off the shaft and leave the shaft in there blocking the hole. Then you can remove the little vacuum canister off from under the manifold and get a spare vacuum line to run to the ECU. I can take some photos of it later. Probably best to get the vacuum source to the ECU sorted first though. Mine all worked mint with the base map from the GTT an I've pretty much let the closed loop sort the fueling and took 1 degree out of the whole timing map.
    • This IS something you also have to configure in Haltech (or at least I did in the past when going from onboard-to-ECU map sensor and an external MAP sensor in haltech land).
    • I'm hoping it's something as simple as the ECU is looking for an external MAP sensor, but he is trying to use the onboard MAP sensor.
    • You won't need to do that if your happy to learn to tune it yourself. You 100% do not need to do that. It is not part of the learning process. It's not like driving on track and 'finding the limit by stepping over the limit'. You should not ever accidently blow up an engine and you should have setup the ECU's engine protection to save you from yourself while you are learning anyway. Plenty of us have tuned their own cars, myself included. We still come here for advice/guidance/new ideas etc.  What have you been doing so far to learn how to tune?
    • Put the ECU's MAP line in your mouth. Blow as hard as you can. You should be able to see about 10 kPa, maybe 15 kPa positive pressure. Suck on it. You should be able to generate a decent vacuum to about the same level also. Note that this is only ~2 psi either way. If the MAP is reading -5 psi all the time, ignition on, engine running or not, driving around or not, then it is severely f**ked. Also, you SHOULD NOT BE DRIVING IT WITHOUT A LOAD REFERENCE. You will break the engine. Badly.
×
×
  • Create New...