Jump to content
SAU Community

extracxtors

gatty

By gatty,
in Engines & Forced Induction

 Share

Recommended Posts

SRW-1 Explorer

SRW-1

Posted
Posted

Hey guys, have any of you got a photo of your car with the coby extractors fitted or any other type for that matter. I'm fitting a camber kit next week and contemplating whether or not to lower it at the same time or leave it stock to allow for the extractors if they hang low. I need to be able to get up my steep driveway

dondesoto Community Regular

dondesoto

Posted
Posted

ive only seen pics of them , and i ,m not real keen on the design , no 6 pipe looks like its 2nd bend is too tight also same on no 1 pipe . they are not tuned length cos the front pipes look a lot longer than the rear ones . the primaries are 1 1/2 ", looking at the size of the rb25de ports they should be 1 5/8" primaries . i,ve had a quote from a business called GONZO PIPES , he makes the best , does lots of race cars , but will cost around $900 and that was with a tuned length megaphone for racing ... i got pics of the coby extractors if you want

SRW-1 Explorer

SRW-1

Posted
Posted

If you've got a pic of the extractors fitted that would be great, otherwise i've seen a pic of them in a catalogue. I may be wrong but they do look a bit dodgey. Wrapping them in exhaust wrap and the red paint flaking off doesn't grab me either. I'm in Melbourne, are there any good exhaust places that would do a good job for a reasonable price?

Greg Veteran

Greg

Posted
Posted

Hi Guys,

Yes the Coby extractors are "dodgy", but they are good value for money.

They're cheap - not a lot of engineering could have gone into them.

However, we know they smooth the power and torque curves of the engine, improving drivability. The engine feels a LOT more torquey at lower revs and pulls well from about 2500rpm.

For me it was so noticable that on roads I drive regularly I could use 5th where before I had to use 4th.

So while they are definitely not optimal from a performance point of view (as dondesoto showed us), I reckon they do a great job for the money.

Cheers,

Greg

SRW-1 Explorer

SRW-1

Posted
Posted

Thanks for that greg, i think i will just go with the coby's, so you think ordering them from partsco is the way to go? How long does it take and what do you recommend as to fitting them re the paint flaking off etc. Shall i strip the paint beforehand? Have you lowered you car or dos it still contain the stock suspension. It just worries me a bit if they're goign to be dragging on the road after lowering! Or going over a speed hump. I have lots of speed humps where i live :)

Cheers!

Greg Veteran

Greg

Posted
Posted

PartsCo are the way to go. You pay New Zealand price, so save a bit of money as well. If you can be bothered, I recommend stripping the paint and then either wrapping them in exhaust wrap or painting them with a suitable high temperature paint.

My car is stock ride height and I've never had a problem with scraping. I'll take a pic to show you how low they hang, if you'd like!

Cheers

Greg

redline2003 Community Regular

redline2003

Posted
Posted

2500$ for extractors only!?!?! $2K will get you a full(dump,front,hiflo cat,cat back and muffler) exhaust. not even 2500 for a full NA exhaust sounds believable, unless you gain like 30rwkw from the extractors alone. not saying i dont believe you Greg but that price is outrageous

redline2003 Community Regular

redline2003

Posted
Posted

although im a fan of buying 'proper japanese aftermarket gear' such as trust, hks etc due to them having alot of R and D, if a quality product cannot be obtained then custom is the way to go. custom tuned length non restrictive extractors could see as much gain as Fujitsubo extractors.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • oHBoy.
      2001 R34DE

      By oHBoy. · Posted

      All 3 I guess. The car came with the JASI Aero 4 door Type R Full Kit unpainted so this was one thing at the top of my list to complete then I noticed there were body panels parts for this kit so i picked them up along with some black mesh to fill in the front bumper and front side air vents. car is at a paint and body shop atm completing this work. Next I will be addressing the internal bells and whistles, great summer project I can do with the kids.  full interior removal - ,boys car sound deadening - pads and spray ,boys stereo, sound, lighting - Big 3, GTT or bigger alternator ,kids head lining - dye black add star lighting mod ,daughter. That's it for the next 5-6 months. I have some motor maintenance  work i have to plan out. oil filter relocation, gaskets, mounts. beyond that, mind is starting to turn over if i can use a DET intake plenum, block off turbo ports & pipe in a air intake.      
    • oHBoy.
      Starter motor replacment teeth count.

      By oHBoy. · Posted

      roller coaster of a ride. Alarm system was removed & main harness was repaired where possible. still no fix just random successful starts. moved on to the replacing the ignition switch and relay. well all this troubleshooting & repair has been going on, the car is at a paint and body shop being pushed around. Ive been going down there on odd days after work to get it sorted.     
    • fatz
      Beers and skylines Fatz style

      By fatz · Posted

      5th November if you want to come out for a spin wakfield
    • jtha7
      Strange issue RB25DET wont start

      By jtha7 · Posted

      PROBLEM WAS BROKEN COOLANT SENSOR!!! Replaced with a new one and its running mint.
    • GTSBoy
      R34 GTT triple gauge pod plug pinout?

      By GTSBoy · Posted

      I think he was only proposing to use the wire, not the sender. Simply because it runs from the right place to the right place. Personally, I wouldn't hack up the factory wiring like that. I'd just lay in the Defi loom.
×
×
  • Create New...