Jump to content
SAU Community

Recommended Posts

  • 2 weeks later...
  • 3 months later...

Hey do you happen to have an rb25 clutch fork? I seem to have broken mine.. :/

Sorry no I dont :(

Still got the r33 rear reo? May need one in the near future

Yes I have a few here as I just got another 2 33s

Chasing R34 sedan front and rear bumpers, sedan side skirts, auto shift knob, the surround around it, and the auto gear display in centre console, NA RB25neo engine cover, air box, intake piping.

Sorry all sold already

Hey mateDo you have the drivers side front splash guard from the wheel arch from a series 2?CheersAdam

Yes I have a few here give me a call or txt

Closed.

Sounds pretty much like a trader, or a backyard operation not far off that.

Having a quick look at the PM volume and the types of discussion - this also backs it up.

If you wish to trade here in volume on SAU - you are required to become a paying trader just like everyone else.

More information can be found here:

http://www.skylinesaustralia.com/forums/topic/294953-are-you-a-business-want-to-advertise-on-sau-click-here/

And this does not mean continue to use the PM function.

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Hard to find reliable dyno results that help my selection   Thinking G30- 660 twin scroll 1.06   Problem is my current setup isn't imo terrible. This is the genuine flog it at the track tune so there is a few kws in it but pulled for track safety   Non VCT RB25DE home built and has baby 256 Poncams, 60mm throttle body. 90mm exhaust and decent ARC cooler with Emtron KV8 Would like to break 400rwkws on 20psi and want a bit more through the 4,000rpm range. New setup needs to beat attached dyno
    • Hey y'all, had some bad ball joints in my tie rods, so figured i'd just replace both inners and outers.  Went with the high-misalignment system from GKTech. My car's lowered so figured why not. M14 Super Adjustable Inner Tie Rod High misalignment S13 240sx/S14/S15/Skyline tie rod ends (12mm/14mm) Welp, took over a week to get the job done, but finally did. Took it on the maiden voyage today and... - The OE boots do not sit properly on the new inner tie rods - If you look at the photo in the link above, new ITRs are basically threaded all the way through the length of them, so best I could do was tighten the boot down with a screw-down hose clamp onto the ITR's threads. - There is a "whoosh"ing sound every time I turn the steering, seems like it could be coming from the air moving into/out of boots. Concerning, bc it'll likely pull in nasty shit from the outside when I turn... namely thinking of moisture. - Looking at the rack from the back of the car, under it, the left tie rod is straighter than the right. Right droops down a bit. - My alignment is way outta wack, that's expected. Taking it to get an alignment as soon as I can. - The big thing is that the steering isn't really "springing" back like it used to. Wondering if there's something tied to pressurization of the system that I managed to f**k up. This was supposed to be a 20 min job... why doesn't anything ever go right with these cars?
    • Thanks guys, toruqed down to 65ft-lb, or 88 n-m.  Now have other problems, will chronicle in another thread. You guys are the best, thanks for all the ugga duggas.
    • R serious becoming more of a weekend cars or collectors cars there are less on the road these days , but you sometimes come by one or two . we might have to start spotting the V serious to make up for the gap.  
×
×
  • Create New...