Jump to content
SAU Community

Recommended Posts

PRICE DROP

RB25DE Non Turbo Only Parts

  • Fuel Rail, Regulator and Injectors - $90
  • Exhaust Manifold and heat shield - $35
  • Exhaust Front Pipe and heat shields - $35
  • Air Box - $25

RB25DET Turbo or RB25DE Non Turbo Parts

These parts are suitable for either turbo or non turbo RB25 motors. I'm pretty sure all of them are interchangeable. If some aren't please let me know.

  • RB25DE VCT Cylinder Head - This is the non-turbo variant which has lumper cams than the DET version and was going to be used for an RB30 conversion. I've spent $300 (I have receipts) on it to have it disassembled, cleaned, warp/crack/pressure tested and combustion chambers cc'd to get it ready to be ported and polished etc - $800
  • Alternator and Bracket - $90
  • Inlet Runners from head to plenum good for port matching to head(no water pipes) - $45
  • Manual Gearbox Starter Motor (might be usable on auto) - $60
  • Power Steering Unit (a bolt mounting hole has a crack and the pulley wheel is bent) $40
  • Turbo Oil Supply Line with heat shielding - $25
  • Coil Packs (6x), Wiring/Plugs and Alloy Brackets - $250
  • Water Pump Pulley Wheel - $15
  • Radiator Fan Clutch Unit - $30
  • R33 GTST Steering wheel Non Airbag - $75

Other Parts

  • Set of 6 RB30 Rods - $95
  • RB25DE Non Turbo Bottom End (crank, pistons, rods, clutch/flywheel) - Was looking for $350 now want $225
  • RB25DET Bottom End (crank, rods, sump, oil pickup, oil pump, water pump). Pistons are damaged from detonation (leaned out injector i think), so would suit a rebuild. Good condition otherwise - Was looking for $500-550 now want $350
  • Take Both bottom ends for $525

PRICE DROP

I'm happy to post any of the bits you need at the buyers expense. Or you can drop in and collect parts from my place. I'm in Melbourne, inner east. I would prefer the buyer of the engines to collect them as the cost of shipping them interstate would be about $100 to Sydney, around $160 to Brisbane and $100 to Adelaide so not really worth it. These are my shipping estimates from previously shipping an engine to Sydney.

Here is a link to a zipfile with the pics in it (no pictures of cylinder head).

Email me at [email protected] or send a PM

Cheers,

Andrew

Link to comment
https://www.sau.com.au/forums/topic/41476-assorted-r33rb25-parts/
Share on other sites

[*]Alternator and Bracket - $125

[*]Radiator Fan Clutch Unit - $45

happy to post any of the bits you need at the buyers expense. Or you can drop in and collect parts from my place.

Cheers,

Andrew

hi andrew im from SAU anyway the fan clutch unit, is that the fan that bolds to the front of the radiator? u got pic? my email is [email protected]

it's the bit that goes onto the water pump that holds the radiator fan. The silver bit that looks like it's got little heatsink fins on it. It's the clutch unit that keeps the radiator fan spinning at a constant speed.

ok, tomorrow i will break out the digi camera and post pictures of all requested parts!

Edit: tomorrow (saturday 29th may) i promise will be picture day. I got my car back on the road so i've got some time. I'll take photo's of all parts on the list, and post them up. What's the easiest way to post them? how do you do the thumbnail posts?

Andrew

  • 3 weeks later...

Ok guys, sorry for such a long delay. Here are some photo's of some of the parts. If there are any that you want that aren't here let me know and i'll take a snap.

calemb: that's a bit low, $110 and it's yours.

Here is a link to a zipfile with the pics in it.

Also how do you do the little thumbnail posts with all the pictures in it?

Cheers,

Andrew

what does the VVT switch wire look like (colour and location)? i presume it does as the head that it was connected to has VVT. Injectors are standard RB25DE injectors. I presume they will be the same as RB25DET but just flow a bit less, so side feeds.

Cheers,

Andrew

  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I have more than enough digging, laying blocks, moving gravel, airrating, feeding and top soiling the grass, and setting up the veggie gardens growing some seedlings,  and then removing all the unused rock to keep me busy for the next few months at least,  hopefully the rain stops soon so I can get a few hours in this arvo, but, before that Sunday is washing day, is every body happy, you bet your life we are Nice country road day drives are a day off whenever I'm muscle sore from all the landscaping at the moment, but, more epic multiple day drives will start once the majority of the big jobs outside are completed
    • I hear that would involve some nice country road drives into the hills for Mark...
    • I thought I'd come back and add something I JUST learned. A Toyota LandCruiser with a 1HZ, mates perfectly with a bottle of Nulon brake fluid. As in, it perfectly screws in. Great make shift funnel when you cut the bottom of it off. This may work for your Corolla.   Unfortunately, tipping a 10L drum is much harder than a 4 to 6L bottle, and they no longer include the easy pour tap which was just perfection to use previously.  
    • Guys since i bought r33 gts25t coupe 1994 automatic a/t(manual swap 350z gearbox)  all i got is problems, always problems. Lets start with that when i turn key into ignition(ON) fuel pump doesnt always works. Sometimes i have to turn key twice Off/on/off/on until it primes. Its new, dw300 - 340lph. My gearbox broke so i did gearbox swap, install different intake manifold, injectors and i take pipes. Car was sitting in garage for more than half a year. I did assembly all not that long ago and when i turn ignition cant hear prime. All of sudden it stopped working. Theres many videos on YouTube how to make relay mod on r33 straight from battery so i did and it doesnt work! 😰 30 - battery positive  87 - positive from fuel pump to relay 85, 86 - one of two wires from original fuel pump wires(light blue, grey) and it didn’t work. so I check on ignition and took original BLUE relays wires from trunk, next to fuses. (I believe it’s IGN+ and ECU pin 18. it didn’t work…  tried connecting (IGN+ from og relay) and (ECU 104 from 1of4 FPCM wires) to my new relay 85/86 and it didn’t work.  I unplug FPCM. Didn’t work. im thinking what’s wrong   fuel pump is working, if I leave IGN+ on 85 and 86 straight to ground it works but it’s just nonstop. Since it getting constant 12v after key in ON. light blue wire gives me 6-8v.  so how this should be connected? What causing ECU not giving — on pin? Or I did sth wrong and that’s why it doesn’t work? I need negative signal on ECU that control fuel pump. What this should be?
    • You can use your VIN to look up the factory part number somewhere like amayama, and then look to order new if necessary. https://www.amayama.com/en/genuine-catalogs/nissan Depending on price you might want to rebuild instead. @GTSBoy I had an interesting insight into US market parts when the Titan rear calipers were sticking. New calipers were dirt cheap, about 20% more than a rebuild kit....they are just considered throw away maintenance items
×
×
  • Create New...