Jump to content
SAU Community

Recommended Posts

New studs in (had to clean up the nuts with a tap as they were binding on the new studs), cometic exhaust gasket on

post-88452-0-92848000-1384845586_thumb.jpg

and new turbo gaskets on and lines hooked up

post-88452-0-67203600-1384845613_thumb.jpg

Time to head home and finish a job application and come back tomorrow and fill it with fresh oil and coolant, hook up the dump pipe and exhaust and start it to check for leaks.

Thanks man. The R32 actuator i got off you points a different way to the 34 one so ill have to take over some tomorrow.

So much evidence of exhaust leaking from the turbo flange and some of the manifold nuts were finger tight.
I imagine my exhaust will be much louder now :P

There is something weird going on with the stock boost control solenoid.

One of the hoses(top one i think) is blocked off with a screw and the bottom one runs to the air recirculation pipes. No ideas what's going on there :S

I'll work out which wire i need to earth tomorrow as well.

You don't want to earth it do you?

If plumbed in with the 32 actuator you'll get 12 + psi.

Just a hose from the turbo nipple to the actuator will give 10psi.

Take the solenoid out.

Wasn't there intact...it was lots of small pieces. Looking at the other blades it looks like it came off bounced around the other fins got chopped into little bits and the rest turned to dust. from what i could see anyway...i might take the cat off tomorrow bang it on the ground and make sure.

got my alarm fob working!! Now have 2 that work.. wish I knew it was so easy before..

also got new keys cut =)

its the little things..

oh, made a cardboard template for pod box just to see what I'm making and I rekon i'll just buy one. By the time I buy tools etc it will be about the same price and a lot less hassle.

What do you want from it? If stock boost, do the Free High Boost Mod first. 7psi all the time. :thumbsup:

Thread here ---->> http://www.skylinesaustralia.com/forums/topic/42895-howto-rb25det-high-boost-mode-with-standard-solenoid/

Haha yea :) the guy before me blew the turbo. So he replaced it and had it running 12 psi.. He took the boost tee :( buy hay I'm only on my ls.. I don't need huge power from the girl !

What do you want from it? If stock boost, do the Free High Boost Mod first. 7psi all the time. :thumbsup:Thread here ---->> http://www.skylinesaustralia.com/forums/topic/42895-howto-rb25det-high-boost-mode-with-standard-solenoid/

I'm going to sound like an idiot. Haven't read through the whole thing yet aha. Where is the solenoid :/

In robs first pic the top boost line has been cut and clamped and the black wire has already been earthed. But I haven't seen it hit 6psi

Edited by ..::R33GTS-T::..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...