Jump to content
SAU Community

Recommended Posts

Hey guys Located in Sydney, contact 04 21 451 965 (prefer pick up, may post at buyers expense)

Have a brand new in the box and still sealed in plastic bosch 044 with a brand new surge, not some dodgy ebay overseas job, was made correctly want both items gone $ 250 for both

Also have a Brand new in the box never used turbosmart pro-gate 50 mm ext gate blue, 600 ono (goes for something ridiculous like 900 on the site

also have 80 mm throttle body, suit rb25, brand new 120

Also have an rb25/30 with an r33 gtst box

the block has 20 thou over, JE pistons, h-beam rods, new ACL rings, bearing, gasket, 2000 cc boschy indy blue injectrs, greddy style plenum, stage 1 poncams, new oil pump, r33 gear box with brass button twin plate clutch, bought of someone else whose funding had run out to complete, lost my interest in this side project and want this and everything with it gone, its had a full rebuilt hasnt been run since the rebuild, after 3500 ono for the engine realistically I will take 3200, dont offer me lower then that, and 1400 ono for the box and clutch included, not keen on seperating the box from the engine untill the engine is sold, if your after both together (its still connected) or you can take it all for 4300, anyway enough rambling on

Pics

post-103063-0-21227800-1355453341_thumb.jpgpost-103063-0-87867200-1355453354_thumb.jpgpost-103063-0-55280500-1355453369_thumb.jpgpost-103063-0-62720500-1355453380_thumb.jpgpost-103063-0-16178200-1355453391_thumb.jpgpost-103063-0-66878700-1355453402_thumb.jpgpost-103063-0-65573500-1355453413_thumb.jpg post-103063-0-44422900-1355453565_thumb.jpgpost-103063-0-52428300-1355453579_thumb.jpgpost-103063-0-39958500-1355453590_thumb.jpg

Edited by GTR_77

Had a couple questions on the pump it is genuine and does have czech republic stamped on the side, not germany and it is stamped properly not dodgy

http://trolltuner.com/?p=692

If your after the pump alone im after 200

Sorry mate not parting out the motor, have been receiving alot of interest and calls about the motor, price of the motor will also be going up once I have validated the internals come this monday. If the current interested party's dont end up wanting it, pics and proof will be posted along with the new price so please disregard the current one.

Bosch 044 and surge tank SOLD

Brand new Turbosmart pro gate price drop to $500

Edited by GTR_77

Engine is now SOLD pending payment.

Also have a picture of the gearbox and clutch

its a Xtreme twin plate ceramic clutch which is new and never used its 1300 for it in the box brand new im after 950 ono

manual rb25 turbo gearbox 1400 ono

post-103063-0-61999800-1356657340_thumb.jpg

post-103063-0-42218500-1356657349_thumb.jpg

post-103063-0-82154200-1356657357_thumb.jpg

post-103063-0-36895600-1356657364_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
    • I assume clearances were all a-okay?
×
×
  • Create New...