Jump to content
SAU Community

Getting Out Of Track Days Performance Parts Sale

bmdrifta
 Share

Recommended Posts

bmdrifta Contributor

bmdrifta

Posted
Posted

So the decision is made that I'm getting out of track days for the next few years.

To sell the car and make it roadworthy I'm getting rid of almost all the upgrades I’ve done over the past couple of years.

All parts are all still currently on the car and all working flawlessly. Its also daily so may take a weekend to remove parts. Car is a Black R33 GTS-T

If there is any interest in the car I am open to selling the whole package while everything lasts. Otherwise I will be putting back to stock before selling.

$1200 Power FC

$1200 Hypergear OP6 High flowed

$250 19 row Oil Cooler with Filter Relocation

$100 Drift Seat (Cheep autobarn special. The side is a little damaged by getting in and out)

$140 Harness Bar

$250 4 Point Harness

$150 Strut Brace

$150 Split Dump Pipe

$1500 Ksport 8pot Brake kit. (Calipers, 2 part disks, Bluestuff pads)

$150 ASI 52mm Radiator

$150 Xforce 3inch Cat Type 1

$500 1.5 way Mechanical Diff in housing.

$300 FMIC Kit

Can Post pics or welcome to view items on the car.

Make an offer to Rob 0430 310 430

Pickup from 3199

bmdrifta Contributor

bmdrifta

Posted
  • Author
Posted

Type of harness bar? I'll be getting pictures of everything tomorrow afternoon.

Not sure what brand of diff, it came from a mates car when he bought it. He had two so I grabbed it for me. Locks up on power perfectly every time. Made oversteer out of slow speed corners much more predictable. Just in a standard R33 housing.

gmr Collaborator

gmr

Posted
Posted

Cheers Rob.

Does your R33 GTS-T have abs?

Sorry mate I'm a Silvia guy, did a search and apparently they come in abs and non-abs? Stock ratio's 4.1 I think.. texting a mate now who knows more than I do lol.

You wouldn't have a photo of the centre? Just want to make sure it's a 1.5-way.

I'm keen to buy it but would need to confirm first.

bmdrifta Contributor

bmdrifta

Posted
  • Author
Posted

Sorry mate, zoned out and forgot there was both abs and not abs. It's in an abs housing (has the hole for speed sensor) although its currently in a non abs car. I don't have a photo of the Center however I'll absolutly guarantee it's a 1.5way. Locks up hard under throttle and releases as soon as your off the loud pedal.

bmdrifta Contributor

bmdrifta

Posted
  • Author
Posted

Here are some pics, anything ive left out just let me know.

Also Harness bar and Diff sold pending payment.

Hypergear OP6 R34 Highflowed turbo. You can also see the turbo side of the Split Dump pipe in this pic. Its once peice right though to the cat.

post-70570-0-32764100-1356329639_thumb.jpg

Strut Brace, radiator and crossover pipe for FMIC.

post-70570-0-83594400-1356329719_thumb.jpg

ASI 52mm High performance Radiator.

post-70570-0-02611500-1356329807_thumb.jpg

Ksport 330mm Big Brake kit.

post-70570-0-41653400-1356329848_thumb.jpg

Velo Harness. 3 inch shoulder, 2 inch lap 4 point. Rotating Cam lock.

post-70570-0-90618600-1356330132_thumb.jpg

Oil Cooler with relocation.

post-70570-0-14124400-1356329769_thumb.jpg

post-70570-0-40658500-1356330243_thumb.jpg

bmdrifta Contributor

bmdrifta

Posted
  • Author
Posted

Update, the harness bar and diff are paid and gone. Ive had some interest in the car as a complete setup however at this stage everything else is still up for sale.

I forgot a few other parts to add to original

$80 Drivers side seat rail to suit R33 mounting points

$120 Front swaybar

$75 R33 turbo manifold

Also price drop on:

$1200 Ksport 330mm 8 pot brakes.

$1100 R34 Highflow Turbo

disco_potatoe Rising Star

disco_potatoe

Posted
Posted

Update, the harness bar and diff are paid and gone. Ive had some interest in the car as a complete setup however at this stage everything else is still up for sale.

I forgot a few other parts to add to original

$80 Drivers side seat rail to suit R33 mounting points

$120 Front swaybar

$75 R33 turbo manifold

Also price drop on:

$1200 Ksport 330mm 8 pot brakes.

$1100 R34 Highflow Turbo

What sway bar do you have for sale and is it adjustable? What condition is it in?

Cheers

bmdrifta Contributor

bmdrifta

Posted
  • Author
Posted (edited)

hi, interested in the turbo, what power are you making with it and how many ks has it done?

The turbo is a stock r34 turbo that has been highflowed by Stao at Hypergear. (do a search on the forums if your not familiar with him)

It has done approx 2000km since being highflowed still in perfect condition.

It was running at 12psi on mine which was doing 220kw at the wheels. The limiting factor was the stock injectors though. Stao's tests show 280kw is easily possible on E85 with supporting mods, around 250rwkw on ULP. Response is kept almost stock with this turbo which is why I purchased for track. I wasn't going for raw power.

What sway bar do you have for sale and is it adjustable? What condition is it in?

Cheers

Whiteline front swaybar to suit R33. 5 hole adjustable. There are a few scuffs on the paint but otherwise its great condition.

post-70570-0-41038000-1356833119_thumb.jpg

Edited by bmdrifta
Just_Rb Rising Star

Just_Rb

Posted
Posted

The turbo is a stock r34 turbo that has been highflowed by Stao at Hypergear. (do a search on the forums if your not familiar with him)

It has done approx 2000km since being highflowed still in perfect condition.

It was running at 12psi on mine which was doing 220kw at the wheels. The limiting factor was the stock injectors though. Stao's tests show 280kw is easily possible on E85 with supporting mods, around 250rwkw on ULP. Response is kept almost stock with this turbo which is why I purchased for track. I wasn't going for raw power.

Whiteline front swaybar to suit R33. 5 hole adjustable. There are a few scuffs on the paint but otherwise its great condition.

post-70570-0-41038000-1356833119_thumb.jpg

sounds good, how much posted to sydney?

disco_potatoe Rising Star

disco_potatoe

Posted
Posted

The turbo is a stock r34 turbo that has been highflowed by Stao at Hypergear. (do a search on the forums if your not familiar with him)

It has done approx 2000km since being highflowed still in perfect condition.

It was running at 12psi on mine which was doing 220kw at the wheels. The limiting factor was the stock injectors though. Stao's tests show 280kw is easily possible on E85 with supporting mods, around 250rwkw on ULP. Response is kept almost stock with this turbo which is why I purchased for track. I wasn't going for raw power.

Whiteline front swaybar to suit R33. 5 hole adjustable. There are a few scuffs on the paint but otherwise its great condition.

post-70570-0-41038000-1356833119_thumb.jpg

Do you know what size the sway bar is? How many mm? Is it 24mm adjustable?

Also what condition are the bushes in?

How much for postage to 3025 post code?

bmdrifta Contributor

bmdrifta

Posted
  • Author
Posted

sounds good, how much posted to sydney?

Turbo is going to cost $30 to post to Sydney. Sale also includes braided oil feed line and fitting worth over $50.

Do you know what size the sway bar is? How many mm? Is it 24mm adjustable?

Also what condition are the bushes in?

How much for postage to 3025 post code?

Bushes are in good condition with no tares or anything. Yeh sorry mate, 24mm adjustable.

Would be difficult to post for less than $40 but your only an hour away with east link. Would be cheaper to pickup.

Cheers, Rob.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • soviet_merlin
      Duncan's V37.......race car?

      By soviet_merlin · Posted

      Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • Murray_Calavera
      Jacks that fit under GTR lips that can reach the subframe?

      By Murray_Calavera · Posted

      My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Duncan
      Chris' Toyota Mark ii JZX110

      By Duncan · Posted

      Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
    • Duncan
      Jacks that fit under GTR lips that can reach the subframe?

      By Duncan · Posted

      BTW I measured the jack I have, it is 70mm at the saddle but you only have about 700 until it returns to 150mm high at the cylinder so it is good but no magic bullet.
×
×
  • Create New...