Jump to content
SAU Community

Recommended Posts

Does anyone know of any fabricators who do custom wing support extensions for a 33 Gtr oem wing. Or anything similar?

Regards

Yes , example please

Do you want to go up or out or ?

carbon /kevlar/ glass /zylon

I'm want to go up slightly, kind of like the 34 gtr extensions. although something that i can simply bolt onto standard wing to raise for more downforce. Not sure on material maybe carbon fibre supports something simple and affective. Cheers

I'm want to go up slightly, kind of like the 34 gtr extensions. although something that i can simply bolt onto standard wing to raise for more downforce. Not sure on material maybe carbon fibre supports something simple and affective. Cheers

Which wing do you have now?

Yes taller is not a big deal

Yeah those extensions look sweet maybe abit shorter? Troy I have oem wing, do you make these things?

Can make anything ( except large parts like bonnets etc)

I would need some side shots of that style or hand drawing side on , a close up of the front side

and a tracing of your wing profile and upright profile to mock up a test version

please note a sharp plane holding up the wing works but the police will ask you to remove it for pedestrian safety ( by the time someone gets that far its bad anyway geez) so a little shape would be required to round off the blades slightly

Aerodynamics would improve anyway and it would be stronger as well

So if someone can do that I can whip up a test part for someone to fit up ? I know a local with r33 gtr wing but doubt he would consider using his car to test fit on , so need someone else

I could be interested in this too depending on price. Maybe if there's enough interest we could arrange a GB?

Bit soon for a GB lol

Gotta get a set made first to figure out time and materials

If I had a gtr boot with spoiler on my desk it would be done in a week or less , any spare floating around Adelaide ?

( yes I need to move from SAdelaide to QLD to have access to more club users haha)

Bit soon for a GB lol

Gotta get a set made first to figure out time and materials

If I had a gtr boot with spoiler on my desk it would be done in a week or less , any spare floating around Adelaide ?

( yes I need to move from SAdelaide to QLD to have access to more club users haha)

Haha fair call. Just getting pretty excited about the prospect of this haha :D

I think psi parts already sell one..looks better than that too

Dont see one on there site ? I'm sure a bunch are around but at what cost ?

None are kevlar encased , that will help keep it from shatering , most are just flat plate carbon cnc cut and screwed on ? I know a few people who had the police ask them to remove the sharp blades on wings or remove the wing

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeh I think i'll message an old contact i had for ages that manages his own tyre shop now.. n tell him what i want n work with him before ordering..  Got this 17x9 +30 Driftteks on 245/45/17 PSR Drag Radials on the rear.. They fit well - for your reference in future - Rear guards  have been lipped in & minimal to non flaring of the rear Gaurds.  
    • If only it were that easy! I also needed to remove seats, shocks, brake calipers, send my car through a fence, and use measuring and ended up guessing because I didn't remove seats, shocks and brake calipers. It can be hard sometimes Can be a little more complex than 'just measure' if you want to truly measure the entire wheel through all of it's suspension travel. But if you aren't going for every last mm then yeah, you can check the space you currently have and guesstimate.
    • If you own a car, and it has wheels on it, and you know the offset of those wheels, and you have a measuring device, you have everything you need to work out if other wheels will fit.
    • Will this fit? but they are staggered set - RAYS 57DR SEMI GLOSS BLACK 18x8.5 +37 | 18x9.5 +38 5-114.3 STAGGERED SET   or If no go could just get a set 4's wheels of 18x8.5 +37 5-114.3 - would i run 8.5's 235s up front n 245's at the back if I do?   Thanks.        
    • Put a clamp on your return line. I have a feeling it's sucking air, and introducing bubbles to your fuel. With a lot of fuel, less problematic. I'd honestly be redoing all the lines in the tank and clamps on everything.   Also, you've given two different answers to the same question: Asked if being followed by the police you could get down to use the whole tank, you said yes you could, so long as you keep off boost. However, you then followed this up that free revving, it would also cause the issues. I'm doubting free revving is enough to make any noticeable boost on what is likely a decent sized turbo.   So now I have to ask, can you actually drive it lightly and use all the fuel, or does it break up even free revving? Also, have you put a fuel pressure gauge on it? Can you hear the pump change noise at all when you're having this issue?
×
×
  • Create New...