Jump to content
SAU Community

R32 antenna wiring?

BOoStEr

By BOoStEr,
in Car Audio & Electrical

 Share

Recommended Posts

BOoStEr Collaborator

BOoStEr

Posted
Posted

I spent this afternoon fitting a new headunit into my R32.

Just as I was tightening the last screw I thought about this black wire with a red trace I saw that was taped to the two antenna coaxes.

Does anyone know what this wire is for?

I did a search to find out but all I found was a thread with a deleted pic labelled "R32 Antenna box".

Is this an antenna amplifier?

Where is it and what does it look like?

Does this black and red wire power it?

Was there a wire on the back of the stock H/U that should have been connected to the power antenna output on the new H/U?

I haven't tried the radio yet because I haven't wired the amps.

Damn, I screwed the H/U in the hard way to make it difficult to steal.

Link to comment
https://www.sau.com.au/forums/topic/41671-r32-antenna-wiring/
Share on other sites
BOoStEr Collaborator

BOoStEr

Posted
  • Author
Posted

No, it's just a black/red wire that runs with the antenna coaxes from the factory. It has a joiner where it comes out of the antenna wiring and then runs into the loom.

My Q is does it then run in the loom to the plugs for the H/U and need the power antenna output to be connected to it.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Ozdavroz
      WTAC 2025

      By Ozdavroz · Posted

      Yeah good luck out there! Will be good to see a mighty GTST going harder than the GTRs
    • bcozican
      WTAC 2025

      By bcozican · Posted

      i will be there 😁
    • patrickxdf12
      Squeaking clutch/throw out bearing

      By patrickxdf12 · Posted

      Hello!  i just finished manual swaping my r34 skyline with a r33 rb20de box(RB71C)box  When the car is running it squeaks crazy loud and it was smoking from the gearbox area. The gearbox is fine it was tested. The clutch slave cylinder seems like it doesn't fully releases the clutch. I want to ask if this noise is from the throw out bearing or could it be the clutch assembly or disk att.xFliq87Gzw6kImKBVqDebXkj0fBqymk0JaYeP3_3SlM.mp4
    • RP1421
      S15 Spec R

      By RP1421 · Posted

      A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Murray_Calavera
      WTAC 2025

      By Murray_Calavera · Posted

      Yeah mate, never miss it.
×
×
  • Create New...