Jump to content
SAU Community

Recommended Posts

hey all. I already have a thread for this in the WTB section but thought I'd put it in the NSW section too since that might make it easier if anyone here has pieces. Mods if this belongs ONLY in the WTB section then feel free to delete the thread.

Basically, got my car, have a few bits and pieces - mainly cosmetics that I want to fix up. Here's the list. Located in Sydney, NSW around Hornsby area so am willing to drive a bit to pick up (would have to be weekends) but otherwise am also willing to pay postage - depends how much it costs.

Have had some offers but still waiting on pics etc.

  • Armrest centre console lid - my hinge is half snapped

  • Need a new rear driver-side speaker mesh cover in the back, the ones that are on the parcel shelf at the back - Haven't checked if this is removable by itself, so if not, may need an entirely new parcel shelf
  • Driver side rain shield - the clear red colour piece of plastic that sits above the door so you can open some window when it's raining...?
  • If anybody has an aftermarket centre dash console - from the 3 gauges downwards to the stereo area then welcome to show me some pics and make me an offer, I don't quite like the material of the stock console.

  • If anybody has nismo indicators at all, let me know too.
  • if you have any headlights sets/bulbs that you want to sell off, also make me an offer.
  • Rear seat covers - make me an offer OR if you have a set of rear seats for sale also let me know.
  • Castor bushes - nolathane etc etc + rack ends. please contact me ASAP

Please PM me or post here if you have something! I always check.

Cheers guys.

The speaker mesh are pretty hard to find! I gave up lol

The weather shield and dash bits can be had in the CF group buys on SAU pretty cheap and easy.

For the castor bushes and rack ends etc look up GKTECH.COM and similar and you will get a good deal, they are whole arms though.

haha Mat, found some guys with a parcel shelf - so may just swap out the entire thing. don't seem to be many group buys going on now...?

i know that my castor bushes and rack ends need replacing but i'm after a quote on how much it'd cost to replace all/most of the suspension system.

Bump + update(s)

  • Armrest centre console lid - my hinge is half snapped

  • Need a new rear driver-side speaker mesh cover in the back, the ones that are on the parcel shelf at the back - Haven't checked if this is removable by itself, so if not, may need an entirely new parcel shelf
  • Driver side rain shield - weather shield. will take offers for both passenger + driver. also do not mind if aftermarket.
  • If anybody has an aftermarket centre dash console - from the 3 gauges downwards to the stereo area then welcome to show me some pics and make me an offer, I don't quite like the material of the stock console.

  • If anybody has nismo SMOKED indicators at all, let me know too.
  • if you have PROJECTOR headlights sets/bulbs that you want to sell off, also make me an offer.
  • Rear seat covers - make me an offer OR if you have a set of rear seats for sale also let me know.
  • Castor bushes - nolathane etc etc + rack ends please contact me ASAP
  • Stock R34 GTT BOV needed

  • 4 weeks later...

Another update. Items still required.

Bump + update(s)

  • Armrest centre console lid - my hinge is half snapped

  • Need a new rear driver-side speaker mesh cover in the back, the ones that are on the parcel shelf at the back - Haven't checked if this is removable by itself, so if not, may need an entirely new parcel shelf
  • Driver side rain shield - weather shield. will take offers for both passenger + driver. also do not mind if aftermarket.
  • If anybody has an aftermarket centre dash console - from the 3 gauges downwards to the stereo area then welcome to show me some pics and make me an offer, I don't quite like the material of the stock console.

  • If anybody has nismo SMOKED Front bar indicators at all, let me know too.
  • Rear seat covers - make me an offer OR if you have a set of rear seats for sale also let me know.

  • Stock R34 GTT BOV needed

Another update. Items still required.

Bump + update(s)

  • Armrest centre console lid - my hinge is half snapped

  • Need a new rear driver-side speaker mesh cover in the back, the ones that are on the parcel shelf at the back - Haven't checked if this is removable by itself, so if not, may need an entirely new parcel shelf
  • Driver side rain shield - weather shield. will take offers for both passenger + driver. also do not mind if aftermarket.
  • If anybody has an aftermarket centre dash console - from the 3 gauges downwards to the stereo area then welcome to show me some pics and make me an offer, I don't quite like the material of the stock console.

  • If anybody has nismo SMOKED Front bar indicators at all, let me know too.
  • Rear seat covers - make me an offer OR if you have a set of rear seats for sale also let me know.

  • Stock R34 GTT BOV needed

You can try my stock BOV if you want, but you have to come get it :P And bring me a 6 pack lol

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The HG high flow is excellent, and costs about the $$ you're talking about. But it, and probably every other highflow, uses a diffeent core than the original turo, and the original Hitatchi core is quite long. So, I think it is inevitable that there is likely no such thing as a highflow that just "bolts on" with no other effort required. And the same is likely true for HG's outright replacement "bolt on" turbos (the ATR things). And the same is likely true for anything similar from elsewhere. I have no idea if the cheap Chinese/Taiwanese complete turbos from eBay/Temu/etc are as bolt on as they claim. I mean, they claim the bolt onto the NAs as well as the turbos, and we know that can't be "bolt on". But it wouldn't matter because I'm not buying a $169 4 psi turbo for anything other than a paddock basher.
    • Bummer...yeah i "need" something to "ease" up the work and for my driving it would be enough.    Iam counting the tune "without" turbo. I do not mean "cheap" like something from Temu around 200 USD, "Cheap" is something around 1000 USD? 
    • Starter motors used to use the weight of metal (magnets) to provide torque. Now they use (more) current instead. This. It's completely normal.
    • So thing that had me stumped, but I think is OK....is that when it was up in the air, in neutral I had it running to bleed to coolant while I put the wheels back on. I noticed the rears were turning (slowly) which I'd never seen before 20250928_163512.mp4     Because there had been an issue with clutch slip due to pedal adjustment on the dyno, I assumed there was still and issue so spent some quality time upside down under the dash adjusting the pedal....but no matter what I did the wheels still turned in neutral. Even disconnected the master cylinder to pedal rod and same. In despair, I even removed the clutch slave so there was no chance of any preload causing it.....still happened. So either: 1. Something is not right in the bellhousing, or 2. Its a thing sometimes with cold, thick gearbox oil Internet says it might be 2, I hope so!
    • OK, few more things sorted and it is ready for a shakedown on 10-Oct, with one weird thing. Changed the run in oil and filter for the good stuff. 8l came out, about 8.5 went in with filter so that looks all good. Changed the starter (again), this time for a brand new one, works good. Interesting that the Taaaarks one is shorter than factory but spins harder, I guess electronics have moved on a little in the last 30 years. Will be nice to have a bit of extra space under there. Put the timing cover back on, and noted where the cam gears were set as a record.  Will need to double check the timing but it is pretty close. Also put the coil pack cover and intake snorkel back on. Exhaust Inlet Changed the water out for coolant, bled up nicely. Removed the rear brake pads (well worn factory sumitomo ones!), gave the hardware a good clean and reassembled. I've put bendix XP on the back again because the price is excellent at $150 a set and they worked well on the V37. Front pads have plenty so no issue there
×
×
  • Create New...