Jump to content
SAU Community

Big Brake Group Buy #2 - Skyline / Silvia / Stagea / Wrx / Evo / All Makes/models


Recommended Posts

Ok sweet - I will update thread over the weekend.

Full money ready once we have 10 people for the next batch. Nothing required until then (I will PM everyone once we get close to 10ppl to remind) :)

How far does the caliper on the 356mm setup protrude perpandicular to the mounting face of the disk? Just trying to work out of these will clear the spokes on my high-offset RPF1's, as I needed an ~8mm spacer to clear my stock GTT brakes.

How far does the caliper on the 356mm setup protrude perpandicular to the mounting face of the disk? Just trying to work out of these will clear the spokes on my high-offset RPF1's, as I needed an ~8mm spacer to clear my stock GTT brakes.

There was some info on it, in the first thread:

http://www.skylinesaustralia.com/forums/topic/413182-big-brake-group-buy-skyline-silvia-stagea-wrx-evo-all-makesmodels/

Have a read and see if it covers the question, if not post up again and see if we can search for more detail :)

There was some info on it, in the first thread:

http://www.skylinesa...ll-makesmodels/

Have a read and see if it covers the question, if not post up again and see if we can search for more detail :)

Thanks for that Nismoid.. I did see the post towards the end of that thread from Aaron.. Are there technical drawings available of the kits from D2? I really only need two measurements, caliper protrusion from face of disk hub, and radial distance of caliper from center of disk. Sorry for the big ask, I really want to run these wheels without spacers and if I can manage this with a brake upgrade then its win win!

Paul - Had a chance to call past IM yet to see about 380mm?

Everyone else - Updated as below.

Thanks for that r31, ill just get the anodized black 356mm for a r32 Gtr, when would you like the deposit

Added on - Race pad is $150 extra. Ok with that?

Deposit - not required. No money until we get to 10 people, I'll PM everyone once we get to 8 so you can get pennies ready :thumbsup:

I'll put an order in for Anodized Black 356mm fronts with race pads for an r32 gtst, with delivery to Brisbane.

Added on - Race pad is $150 extra. Ok with that?

Paul - Had a chance to call past IM yet to see about 380mm?

Everyone else - Updated as below.

Added on - Race pad is $150 extra. Ok with that?

Deposit - not required. No money until we get to 10 people, I'll PM everyone once we get to 8 so you can get pennies ready :thumbsup:

Added on - Race pad is $150 extra. Ok with that?

Yep no problems also I live in Sydney

Paul - Had a chance to call past IM yet to see about 380mm?

Everyone else - Updated as below.

Added on - Race pad is $150 extra. Ok with that?

Deposit - not required. No money until we get to 10 people, I'll PM everyone once we get to 8 so you can get pennies ready :thumbsup:

Added on - Race pad is $150 extra. Ok with that?

Yep that's no problem.

Hi Guys

D2 got back to me with templates for the 356mm 8 piston fronts. As it says on the doc, it's a guide and can't be used as gospel - ie if you have a bee's dick between the template and the spokes then a real world test fit would obviously be a better option :)

Cheers

Aaron

NI04-7-Model.pdf

NI05-1-7-Model.pdf

NI05-7-Model.pdf

NI06-7-Model.pdf

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Kinda glad I never got to this ..    https://www.facebook.com/groups/1483859159195077
    • @GTSBoy This method was able to get readings of -10 to -2, so it looks like its monitoring.  Now I need to figure out why the vacuum on the line provided isn't alternating with manifold pressure.  I went with 2 lines that an RB25 tuner recommended but I'll get a longer hose and try directly off the back of the manifold.  He may have been used to OEM intake setups while I have a DBW setup that removed the MAF and IACV.  
    • I work at a car detailing and tinting shop called Quark which gets all manner of German cars in usually (mainly due to a contract with Mercedes Benz Kita Osaka, BMW Nishinomiya and others) but every once in a while something special comes in, like a fully restored 1972 HS30 Nissan Fairlady 240ZG... The shop owner had immediately started applying film to the windows as soon as it was in the shop so the interior was completely covered in towels and plastic sheets. But I could get a few photos of the engine bay which was restored like new. Such an amazing car to see in pristine condition in Japan these days.  
    • Was going to say the car pulls up nicely everywhere, especially going into that last long right hander before the main straight. Looks like a lot of fun.
    • Hey Dave, welcome aboard! Good to see another soon-to-be Stagea owner here. The wagons are awesome — plenty of space, still got that Skyline DNA, and loads of potential if you’re into mods. Definitely post up pics when you get it, everyone here loves seeing new builds. What model/year are you looking at?
×
×
  • Create New...