Jump to content
SAU Community

Recommended Posts

I have been doing a shit load of research on doing the swap but i haven't even thought if it will actually fit into my RHD car.. i found a post on www.my350z.com and they mentioned "Importing gearbox from USA. Sharif, had a good deal on some CD009 gearboxes (latest revision) (c.£1,000 excluding delivery and VAT/duty, at the previous favourable exchange rate); but these were incompatable with RHD cars. The gearboxes are RHD/LHD specific"

Does anyone have some insight on this? I can't seem to find any other information on the internet and Coz from ConceptZperformance hasn't replied to my email yet asking him if it will actually fit.. I am purchasing the gearbox clutch and flywheel today so a quick reply would be great.

thank you.

Edit: Ok so Coz replied to my email just as i hit post on here, he says quote

"oh yea, we ship them there all the time"

I am still a little worried, surely he wouldn't just say that to make a $3200 sale would he?

Edited by Seano350GT

Yeah see that's what i thought, it's just annoying reading posts like that when people aren't correct. Coz replied to a 2nd email saying that they use the exact same gearbox for LHD and RHD and that the guy from England has no idea what he's saying.

I think i've got enough confidence now to transfer Coz a lot of money.

It did take me a month to earn $4000 but hey i guess your right Alex.

I can't do that, my bank is conveniently only located in NSW.. i've got a form i've sent to Coz that i need him to fill out the bank details then send it back then i send that to my bank and we're good to go. I really need to open an account with a local bank..

Use Pennytell (mayebe one l) - no transfer fees, you can use direct debit so no fees at all or your CC for faster and more protection but 2%

I used them many times when seller doesnt have paypal or accept CC..

Im also looking at CD009 one day too.. what shipping method and price you getting?

Use Pennytell (mayebe one l) - no transfer fees, you can use direct debit so no fees at all or your CC for faster and more protection but 2%

I used them many times when seller doesnt have paypal or accept CC..

Im also looking at CD009 one day too.. what shipping method and price you getting?

Damn, too late now i've just sent the paperwork off to my bank. Thanks though i will use that for future transactions.

I got a killer deal off Coz at ConceptZperformance. I purchased a brand new CD009 gearbox with all the bits included like chromoly pivot ball ss clutch lines and nismo bushings. I also purchased a Southbend clutch & flywheel combo (Southbend is made by Exedy so it's good quality)

And i was going to buy some amsoil gearbox & diff oil off him but he couldn't source it so i got it for Brisbane pretty cheap.

Anyway, for everything it's exactly $3,144.00 shipped to my door. Shipping for everything was only $575 or something so i'm pretty pleased with that. Coz is also writing up a 2nd invoice to go with the package marked as a gearbox rebuild and valued at under $1000 so i don't get any import/tax fees!

My only thoughts is you might want to make the payment difficult to track if the seller is undervaluing it to avoid import duty.. last thing you want is customs to get suspicious, check your credit card records or bank records and find a payment to the seller for way over what was declared.. at least with a 3rd party involved, it would be harder to track down.

How would you get around this, do you mean transferring money from 2 different accounts? Yeah wouldn't be a bad idea, i'm guessing there is a substantial fine that goes along with avoiding import taxes? lol, Coz says he does it all the time and has no negative feedback but yeah.

The exporter is the one who fills out the customs declaration, so how could the importer be the one responsible for a false declaration? Especially since they won't even see the declaration until they have the item..

However, if customs find out the real value, the importer will be responsible for paying the appropriate duty/tax.

Use Pennytell (mayebe one l) - no transfer fees, you can use direct debit so no fees at all or your CC for faster and more protection but 2%

OzForex are a good alternative, when sending more than AUD$2000. If it's less than AUD$10,000 they charge a $15 transfer fee. Otherwise, $10,000+ attracts no transfer fee and their commission percentage is extremely competitive compared to the banks. More importantly, they make sure the recipient gets what you say you want to pay them. Banks can be a little difficult with that as they don't always factor in the receiving bank's charges when they take your money.

It's how I paid for my V36 back in November 2011. Couldn't be happier. If I ever decide to buy the GTM Supercharger kit, I won't be paying by credit card!

How is coz shipping it for $575? thats pretty good i think. If you sent with pennytel it would be harder to track as they sent the money via their bank not yours so trail ends there. but yeah remove that post :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • I was using the wiring diagram I have So 12.74V is coming into the rear Fuel Pump relay as I measured.  When I turn the key to ON im getting 0.6V to the Fuel Pump plug; which i assume is backfeed voltage and doesnt include the 12V from ignition power.  The rear relay is working and being triggered.  From the diagram I clearly see the rear relay 80 = Rear Relay going into the Body/H loom (R-27) 27 = Fuel Pump plug going into the Body/H loom (T-20) 40 = Short Connector (R-27) I'm reading 12.74V on the blue/black wire which is the power for the Fuel Pump   From this diagram I can see the Ignition relay goes into the front and up to the ignition  2 = Fuel Pump Relay <1M> (R-27) 37 = ING Relay <1M> I started from the pump using this reference Which the way I read it (referencing Nissan wiring color codes) is: Pin Wire Color Function 1 B/P (Black/Pink) Ground 2 L/W (Blue/White)        ECU Trigger 3 SB (Sky Blue) Fuel Pump 5 L/B (Blue/Black) 12V Constant Tested SB to SB on Fuel Pump for continuity - confirmed Tested negative on Fuel Pump to 12V battery and L/B - confirmed 12V Pulled the relay putting 12V between Pin 1 & 2 and testing continuity on Pin 3 & 4 - confirmed relay   So that has me looking at this part of the circuit to understand whats happening here...and im still confused. From best I can tell; the disconnect is back to my previous diagram; between Ignition Relay and Fuel Pump Relay...which yet again; afaik is where the immobiliser should.    Thats what I was trying to explain to GTSboy; im not trying to fix it myself; yet I seem to have to get a Masters in Electrical Engineering (while im busy doing my actual job of DevOps & Cloud Engineering) somehow.  I just wanted more expert opinions; or more so that what I tested is correct and proves it to something around that area; to go back to the alarm tech (for a 3rd time) that he needs to fix it. He keeps telling me its not the alarm. He lives on the complete other side of the city so i understand not wanting to make a trip but as I said before if its the alarm it should be up to him to fix it. But he's adament its not; even though I pointed out the FP was immobilised through the original alarm. To my mind; it seems that the ECU is sending the signal; but the ignition is not getting 12V down the line.       
    • Maybe also really stiffly sprung track cars. Get the inside wheel up in a corner and all the fun stops. Also me sometimes (rarely) when I have to stand on the brake to convince the diff to drive the wheel that is still on the ground when I'm trying to diagonally get over severe driveway entrance, etc.
    • I feel like I'm missing something. You had an authorised installer come out and install a new alarm. Post install the car doesn't start, and you aren't getting the installer back to fix what they did wrong?
    • So either way it is gearbox out and look what is wrong?  I know about the input shaft bearing. Even before swap/new clutch the it sounded exactly like this: So is that inout shaft bearing or the other was installed backwards?  And can some please tell me the part number for that input shaft bearing? The gearbox is small box from R34 N/A and number is FS5W71C. Thank you  
    • I am yet to see anyone ever regret a quaife or helical. ...other than drifting/skidpan duties. I kind of want to upgrade my factory helical with a Quaife (but really it's not ultimately that different, and is a MASSIVE UNDERTAKING), that's how good the hype is about them, that I want to try them 'just to see'  
×
×
  • Create New...